Animated Character and Sign Assembly Instruction
This article provides information on how you can mount and populate our mini light signs and animated characters.
Click here to download the instructions ---> Article Download
|
CoroStar Assembly Instructions
This article provides information how how to assemble the CoroStar.
Download Instructions |
Cross-Ship Replacement Instructions
You've been directed to this page because HolidayCoro support staff has determined that the product you have, may be or has been determined to be defective and needs to be exchanged for a replacement |
CoroFlake Assembly Instructions
Assembly instructions for the CoroFlake.
Download Written Instructions
Watch Video Instructions |
RGB MegaBall & RGB Post Toppers Assembly Instructions (6" & 8" Versions)
This page contains instructions for building the RGB MegaBall - both the 6" and 8" versions and the 8" RGB Candy Cane Post Toppers.
Download Written Instructions (please note that |
CoroTree Assembly Instructions
CoroTree Installation Instructions
The CoroTree has a "living hinge" cut down the middle of the tree. This hinge can have the gap facing outward or inward. When the gap is facing inward it has a s |
Pixel Spacing Distances / How do Pixels Get Their Addresses?
First, lets start with a basic understanding of how pixels address pixels and then on to how this affects the spacing of pixels. While each pixel protocol/chip type (2811, 2801, 6803, 1804, etc) has a |
Controller Firmware Page
HolidayCoro Firmware Page
Step-by-Step Firmware Upgrade Instructions
NOTES:
We highly recommend updates of firmware from a Windows PC ( Mac platform not supporte |
Running Legacy RS485 Light-o-Rama Controllers and RS485 Based DMX (E1.11) and Ethernet Based (E1.31) DMX Controllers Together
If you have an existing LOR network or controllers and would like to integrate modern, standards based controllers into that network, this page shows a variety of different options available to you. N |
AlphaPix Technical Support Page
AlphaPix Support Page
This page contains support and setup instructions and videos for the AlphaPix line of Controllers - both Evolution (part of the Flex system) and Classic.
If you are se |
Software Applications Supported by HolidayCoro Lighting Controllers
HolidayCoro sells a wide variety of hardware that allow you to build most any project but what we don't sell is software - and for a good reason. We believe there are many good applications on the mar |
HinksPix Setup and Configuration Page
This page contains support and setup instructions and videos for the HinksPix controllers (V1, V2, V3).
If you are setting up a new controller, the recommended order is:
Configure the contro |
Long Range SMART & Regular Receiver Support Page
Long Range SMART & REGULAR Receiver Support Page
This page contains support and setup instructions and videos for all HolidayCoro Long Range Regular and Smart receivers.
If you are setting u |
NorthStar Assembly Instructions
Currently our documentation for product assembly for the Coro NorthStar is in video format:
|
HolidayCoro Custom Props Selection and Customization Instructions
This page covers how to select from the different options when printing custom props How to find and customize props from the HolidayCoro website:
How to make a custom designed, tiled prop using C |
DMX Wiring Cross Reference
HolidayCoro devices that use CAT5 wire for DMX signals (excluding E1.31 devices) are intended to be wired using pins 1 and 2 of CAT5 wiring (568B) for their RS485 DMX input signal. If you are usin |
Pixel MegaTree "CCR" Strip Style Tree Construction Recommendations (Under Development)
The pixel strip / ribbon style tree is a great way to add an amazing element into your display at a low cost. While your HolidayCoro Pixel MegaTree kit includes the lights, power and controller, the k |
Unable to Operate Message on AlphaPix / Network Troubleshooting on AlphaPix
ISSUE: AlphaPix displays "UNABLE TO OPERATE" on LCD interface CAUSE: This message indicates that the AlphaPix will not decode E1.31 or Artnet data because there is no network connection between the c |
PolyCromatic Coro Custom Printing - Customer Provided Graphics Recommendations
Do you have a great photo or graphic that you'd like to print on your HolidayCoro product? HolidayCoro can absolutely do that for you. Here is the process we use for customer provided graphics: Find t |
Pixels have random or erratic behavior when connected to HinksPix PRO CPU
ISSUE: Some or all pixels connected to a HinksPix PRO controller randomly flash, operate when not commanded or have other undesired behavior. SOLUTION: The default speed on output of data is 800 KHz |
