The quartet of singing Christmas Tree adds a truck load of humor to your Christmas display - Just add your controller (32 channels required), mini lights (LED or Incandescent) and our optional sequences and you can be up and working in less than a weekend with a display that will have all your neighbors talking! Available in 23" x 23" or 46" x 46" outside dimensions. What to use 12mm RGB Nodes instead? We have you covered with our RGB version also .FOR TECHNICAL PRODUCT DETAILS INCLUDING - BULB COUNTS, SCROLL DOWN BELOW VIDEOS ON THIS PAGE
62 West Knightsbridge, Woodlands, TX
Q: What is the difference between the 100 and the 100RGB Singing Christmas trees?
A: There are a variety of differences between these two designs - they are:
100 (featured on this product page)
Available in 46" x 46" or 23" x 23" outside dimensions
Designed for 120v mini-lights, either LED or incandescent
Much tighter spacing (usually 1/2" to 3/4") of the lights results in an almost "neon" look and thus the faces look cleaner and more defined than the designs using RGB nodes
Color of different sections (mouth, outline, etc) are set by the color of the bulbs selected
Requires the use of AC based controller (sometimes more expensive than DC, sometimes less expensive)
Cannot be adjusted or adapted to use RGB nodes due to the differences in light sizes
About the same cost once completed (controller, lights, wiring) as RGB
One layer of coro required to support bulbs
Easiest to sequence as there are only 8 channels per face
100RGB (see product page )
Available only in 46" x 46" due to the large size of the bulbs
Designed for 8mm LED / 12mm base RGB nodes, either smart RGB pixels or dumb RGB
Faces are not as defined due to the larger spacing of the bulbs (usually 1"+)
Colors of sections (dumb RGB) or even individual bulbs (pixels) can be adapted on a per song or even within the song for more expression
Three layers of coro required to support bulbs
Requires the use of DC based dumb or smart controllers
Harder to sequence as there are a minimum of 24 channels (dumb RGB) to 921 channels (smart pixels) and most sequences are not designed for RGB faces, so you may have to adapt exisiting single color sequences
The following information can be found in our Knowledge Base page :
VIDEO
Chad's Singing Christmas Trees:
Ton BetGeorge's "Tweaked" Christmas Trees playing Christmas Can Can:
Additional Customer Videos:
John Koberg Used his Singing Christmas Trees for Halloween just without the outlines:
Jay Perkins Display with What Does the Fox Say:
John Kobergs Display with Christmas Can Can:
Ralph's Display:
VIDEO
VIDEO
Product Features
General Product Information
Intended locations for use:
Ground / Yard
Wall / Fence / Doors
Roof
Holiday Seasons:
Christmas
Other seasons (turn off Christmas Tree outline)
Other:
Talking: Introductions to songs, voice overs (display hours, rules)
Singing: Singing to songs with vocals
Produced from weather resistant and strong plastic (see below for details)
Reverse side/ back is pre-marked with a contrasting, water proof marker that shows:
The exact path that should be followed for bulb population
Channel number (for matching sequences - See below)
Bulb count for this string / section
Channels and Controllers
Channels
NOTE: We don’t specify a specific color of bulb for each given section (eyes, mouth, outlines, etc.) You can adjust your colors to suit your display, light string availablity and design aesthetic. See our customer videos for examples of different color arrangements.
NOTE: Lights not included with purchase. See our Knowledge Base for additional information.
You can find M5 High Quality Full Wave LED Strings and All LED Strings light strings on Amazon that work with this product.
Channel
#
Area Description
Mini Lights Required
46" x 46"
Mini Lights Required
23" x 23"
1
Tree Outline
200
70
2
Eyes - Open 200 Bulbs for Eye Balls (100 each eye) +
48 Top Eye Lids (24 each eye)
70 (35 each eye)
3
Eyes - Closed
46 Bulbs Total For Both
(23 each eye)
20 (10 each eye)
4
Top Lip
50
18
5
Lower Lip
82
30
6
Bottom Lip
92
35
7
"O" Mouth
50
26
8
Middle Mouth
50
35
Compatible controllers:
Included, optional and customer supplied items
Items included with this item/product/bundle:
One or Four (depending on your order quanity) Black, 4MM (3/16"), ultraviolet resistant, outdoor rated corrugated plastic sheet (see our Knowledge Base for more detailed information about the coro that we use in our products)
Required items for operation:
Mini Lights – Incandescent or LED
Mounting frame – usually inexpensive 2” x 4” material. See our instructions in the Knowledge Base for more information on mounting and frames.
Wood or drywall screws
Approximately 1” Fender washer - This spreads out the load and ensures a good grip on the coro to the wood. These can be purchase from the options above.
Controller – any A/C based controller will work
Misc items – SPT wiring and connectors to form extensions. Any mounting or additional materials require to affix the panels to their mounting location.
Optional items:
Paint – Some people pre-paint the faces on the front side prior to installation of the bulbs to provide a better day time appearance.
Zip ties – Used to bundle up unused wires/lights. See our 4” and 14” zip ties above.
Coordinated Sequences – See our Singing Christmas Tree sequences and save yourself hours and hours sequencing
Customer supplied tools:
Assembly Instructions and Recommended Reading/Watching
Instructions
Shipped with product: Yes
Estimated assembly time: 45 to 120 minutes per panel
Technical Specifications
Color: Black Coro
Material thickness: 4mm
Overall dimensions:
46” x 46” or 23.21" x 23.21" (includes 1.5” border for 2” x 4” mounting frame)
For off-season storage, see our Knowledge Base
Shipping dimensions: 23” x 46” (folded down the middle) or 23" x 24"
Weight: 2 pounds (23" x 23") or 4 pounds (46" x 46") - excluding lights or frame
Temperature Range: -17f to +160f
Material Composition: Polypropylene
County of Origin
Materials/parts: USA (Texas)
Assembly/Mfg: USA (Texas)
Design: USA (Texas)
Warranty & Support
Warranty period
60 days from date of purchase OR until December 31st of the year in which the product was purchased. See our warranty policy for more information.
Customization: Yes - This product can be customized to your specific requirements. For costs, lead times and blackout periods, see our Guide to Customized Products .
Product Revision History
Initial design: Jan-2012. Design used under licence from Sally Simpson.
You might also be interested in...