Home >

DISCONTINUED: Smart / Pixel LED RGB 8mm/12mm Square/Lay-Flat Node - 12v / 2811 / 50 Node String
PRODUCT PHOTO: Smart / Pixel LED RGB 8mm/12mm Square/Lay-Flat Node - 12v / 2811 / 50 Node String
Sold only as 50 Count Strings


 
Additional Photos:


Our Price: $23.99
CLEARANCE PRICE: $13.99
You Save: $10.00


Availability / Ships: DISCONTINUED
Product Code: 673
Qty:

[Product Description Page] [FAQ & Documentation Page]
 
This product being replaced with this item: http://www.holidaycoro.com/product-p/673-WP.htm
  • Differences between 673 and 673-WP
    • Multicolor vs black wire
    • Bare vs waterproof ends
Product Features
  • Features
    • Please note that these require a smart pixel controller - these will not work with dumb controllers!
    • Smart / Pixel Nodes
    • Pixel protocol WS2811 (supported by every major pixel controller)
    • Viewing angle of 120 degrees
  • Lights
    • Total LEDs per node: 3 (Red, Green, Blue)
    • Total LED nodes per string: 50
    • Total DMX channels required per string: 150 DMX Channels
  • Dimensions
    • Overall Length from node 1 to node 50: 12 feet, 2 inches
    • Node to node (center) distance: ~3 inches
    • Lead in and lead out wire length: 4 inches (both ends)
    • Maximum diameter of node: 12mm / .47"
  • Weather
    • Silicone body/base
    • Epoxy sealed body/casing to ensure waterproof wiring and electronics
    • IP68
  • Wiring colors:
    • Wire: 34 x 0.11mm (commonly referred to as 18 AWG)
    • Red = Power Input Anode/+/Positive
    • Blue = Power Input Cathode/-/Negative
    • White = Data Signal
    • Pixel direction is marked with arrows on circuit board (input side)
  • Power
    • 12v DC Input
    • White (all three colors) per node (1 node): .54 Watts / .045 amps / 45 ma
    • White (all three colors) per string (50 nodes): 27 Watts / 2.25 amps

You might also be interested in...
PixelPipe Clip - Clear Lexan 1/2" Pipe Mounting Clip V2 / Mounts RGB Strips and Modules to Fascia, Soffit, Roofs and Walls (Single Clip) Advatek PixLite (tm) 4 Controller PixNode Net™ Flexible - Pixel Node Mounting Net for Matrix Elements Advatek PixLite (tm) 16 Controller
5 to 49 Count Price: $0.69

Add

Add
Price: $43.95 to $69.95
No lower price anywhere!

Add

Add
PRODUCT PHOTO: Clear Lexan 1/2" Pipe Mounting Clip V2 / Mounts RGB Strips and Modules to Fascia, Soffit, Roofs and Walls (Single Clip) PRODUCT PHOTO: Advatek PixLite (tm) 4 Controller PRODUCT PHOTO: PixNode Net Flexible - Pixel Node Mounting Net for Matrix Elements PRODUCT PHOTO: Advatek PixLite (tm) 16 Controller
18" x 24" RGB 8mm LED/12mm Base Pixel Node Matrix - Mounting Board and Frame
2 or More Pixel Panels - Only: $49.99

Add
PRODUCT PHOTO: 18" x 24" RGB 8mm LED/12mm Base Pixel Node Matrix - Mounting Board and Frame

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 21 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Working great! March 28, 2018
Reviewer: Gary Blair from Oregon, OH United States  
Tested and all work fine.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Pixel LEDs March 4, 2018
Reviewer: Roger Hebert from Katy, TX United States  
My Pre-sales items that I purchased from HolidayCoro.com are very good quality. I have purchased from them before and I will keep coming back for more items that I need.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Quick Shipped 50 Node Square Smart Pixel String March 4, 2018
Reviewer: Ron Chazin from Silver Spring, MD United States  
Placed a Pre-Sale order for 50 node smart pixel strings and received them in less than two weeks. Holiday Coro has this year's pre-sale dialed right in. Almost no wait on either of the oders I placed. All strings tested out perfectly, no problems.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Square node pixels February 28, 2018
Reviewer: alvin ryan from arcadia, FL United States  
i use these many different way's.   mega trees, arches. as these are easy to zip tie on pvc.  Have several boxes of them and never had a bad one come in..great product.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 I'd run these on.... November 13, 2017
Reviewer: Drew Hutchinson from Phoenix, AZ United States  
I would run these on all my models if I could afford it. Great price and great node.

Was this review helpful to you?

View All Customer Reviews