Home > DIY Cables / Mounting / Misc > Clearance / Off-Spec > Clearance / Over-stock Items (Regular Condition) >

DISCONTINUED: Smart / Pixel LED RGB 8mm/12mm Square/Lay-Flat Node - 5v / 2811 / 50 Node String
PRODUCT PHOTO: Smart / Pixel LED RGB 8mm/12mm Square/Lay-Flat Node - 5v / 2811 / 50 Node String


 
Additional Photos:
Our Price: $21.99
Clearance Price: $12.99
You Save: $9.00



Availability / Ships: DISCONTINUED
Product Code: 672

MegaTree Mounting Strip - Select the Spacing

None - I'll mount them using my own solution
1" Center to Center Node Spacing - 94 Holes Total / 94.7" Long / CLEAR / Price per Strip - [Add $1.98]
To Waterproof Strip to Wire/Extension Connections

No wrap kit - I'll provide my own waterproof connection
Pigtail Wrap Kit for Nodes / Modules / Power Supplies (Up to two connections) [Add $0.79]

Qty:  
[Product Description Page] [FAQ & Documentation Page]
 
Product being replaced with this item: http://www.holidaycoro.com/product-p/672-WP.htm
Product Features
  • Features
    • Please note that these require a smart pixel controller - these will not work with dumb controllers!
    • Smart / Pixel Nodes
    • Pixel protocol WS2811 (supported by every major pixel controller)
    • Viewing angle of 120 degrees
  • Lights
    • Total LEDs per node: 3 (Red, Green, Blue)
    • Total LED nodes per string: 50
    • Total DMX channels required per string: 150 DMX Channels
  • Dimensions
    • Overall Length from node 1 to node 50: 12 feet, 2 inches
    • Node to node (center) distance: ~3 inches
    • Lead in and lead out wire length: 4 inches (both ends)
    • Maximum diameter of node: 12mm / .47"
  • Weather
    • Silicone body/base
    • Epoxy sealed body/casing to ensure waterproof wiring and electronics
    • IP68
  • Wiring colors:
    • Wire: 34 x 0.11mm (commonly referred to as 18 AWG)
    • Red = Power Input Anode/+/Positive
    • Blue = Power Input Cathode/-/Negative
    • White = Data Signal
    • Pixel direction is marked with arrows on circuit board (input side)
  • Power
    • 5v DC Input
    • White (all three colors) per node: 60 miliamps / .3 Watts
    • White (all three colors) per string (50 nodes): 3 amps / 15 Watts

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Parts and Support May 23, 2018
Reviewer: Nate Tolman from Taylorsville, UT United States  
The smart RGB LED's work great for my application.  Better that the parts is the support that I have received from HolidayCoro.  I had some difficulty getting the LED's to work properly and they provided all of the tech information that I needed.  You guys are excellent to work with. Thanks

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Pixels square nodes February 28, 2018
Reviewer: alvin ryan from arcadia, FL United States  
Holiday Coro pixels.  they work and they stand behind them.  Have never got a bad string yet.. These are not the first ones i have... several thousand.. and i keep buying them.  thank for a good product

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Smart / Pixel LED RGB 8mm/12mm Square - 5v / 2811 April 3, 2017
Reviewer: Matthew Jones from Denver, CO United States  
Purchased several hundred of the 5V 2811's for an upcoming Christmas '17 project. I've only had an opportunity to test them so far but all worked perfectly. The colors were bright and mixing appears to be good. I look forward to completing the prop using these nodes. Shipping following the pre-sale was quicker than expected.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good Stuff May 19, 2016
Reviewer: Larry Weyand from Saint Paris, OH United States  
100 percent quality and fast shipping from in stock in the USA

Was this review helpful to you?