RGB Pixel House and Roof Outline

Product Features

General Product Information
- This kit can be used in a variety of projects, including:
  - House / roof / garage / window / door outlines
  - Fence outlines
  - Side walk outlines
- Works with all sequencing applications
- Comes mostly assembled, you only need to cut and attach extensions based on your specific house lengths. See our step-by-step assembly video. (coming soon)
- If you are not sure if this kit is a good fit for your project, see our House Outline blog post with more technical details.
Included, optional and customer supplied items
- Items included with this kit:
  - Pre-assembled and tested AlphaPix 16 controller - Only 8 outputs are used on this controller, allowing for future upgrades or uses (additional cables purchased separately)
    - Controller assembly, including:
      - AlphaPix controller pre-mounted
      - Power supply pre-mounted
      - Power input wiring
      - Pre-attached output pigtail cables
      - All hardware mounted in waterproof enclosure
      - Fully tested
  - 132 Feet (8 Rolls/5 meters long) of 30/10 Pixel Strip with pre-attached waterproof connectors - the most commonly used house outline pixel type
  - Sufficient extension cables to reach most common sized houses
  - Waterproof enclosure for controller and power supply
  - Mounting clips for PVC pipe (not included) and velcro for strip to PVC pipe mounting substrate
  - Technical support assistance with hardware setup and PC configuration (does not include sequences)
- Customer purchased items required for operation:
  - 1/2" PVC pipe available at any hardware ware store
- Customer supplied tools or items:
  - NOTE: Soldering may or may not be required depending on your house outline design
  - Soldering iron and solder (60/40 rosin core recommended)
  - Dikes / Side Cutters
  - Heat Gun / Torch (for included heat shrink tubing)
- - Misc hand tools - screw drivers
Assembly Instructions
- Video: None / Varies by house
- Written: None / Contact HolidayCoro for Assistance
- Controller Setup Instructions
- PVC Mounting Instructions
Estimated assembly time:
- Varies by number of lighting sections and customer skill - 6 to 24 hours would be typical
Certifications & Approvals
- Underwriters Laboratories (UL) Certified/Recognized/Approved: No
- CE: No
- ROHS (Lead Free): No / Unknown
Compatibility
- Software
  - Works with 100% of all Holiday Sequencing
    Software on the market. See this page for details:
    https://www.holidaycoro.com/kb_results.asp?ID=122
Power / Signal / Wiring
- Wiring / Interface:
  - 12v power for longer runs without power injection
  - E1.31 and Artnet DMX input allows for use with all major lighting applications
- Power input
  - 120v (USA) / 240v (Worldwide) - Switch able on power supply. Customer may need to supply country specific power cord.
Warranty & Support
- Warranty period
  - 1 Year from date of purchase. For complete information, see our warranty details
- Customization: No
Product Revision history
- 09-Apr-15 – Initial product release
- 01-Sept-16 - Updated product list

For additional information, see this detailed article even includes a spreadsheet for performing your calculations for power, channel count, pixels and cost. We highly recommend reading (and often re-reading) this article, collecting the information and if you have additional questions, please contact us!

http://blog.holidaycoro.com/2013/04/outlining-your-house-in-rgb-lights.html