16 Output E1.31 Controller + 350 Watts of Power + Enclosure + 16 EasyPlug3 Pigtails / 5,540 Pixels / Ready2Run Assembled

[Product Description Page]

Hands on Demo

How Long Range Receivers Work

Product Features

General Information
- Available with either the AlphaPix Evolution or HinksPix Pro CPUs
  - Click here for a complete comparison of the individual features of each CPU type
- Using the options above, you can customize your installation as to power and specific expansion boards for your specific project.
  - All power wiring including input and output wire is completely assembled
- The lowest cost multi-expansion board based system on the market today
- Supports all major lighting applications
  - Light-o-Rama Advanced (S3/S4/S5)
  - xLights (all)
  - Resolume
  - Madrix
  - Any applications that supports Artnet / sCAN / e1.31 protocols
Board Information
- CPU Board
  - AlphaPix Evolution or HinksPix Pro
- SPI Expansion Board
  - Maximum of 5,440 Pixels or 32 Universes / 16,384 DMX Channels
  - Per Output - Up to 340 pixels / 2 DMX universes (exclusive of power, see chart below)
  - Each output is clearly marked on both sides of the connector with the output number so it is always easy to find the output.
  - Blown fuse indicators (Red LED light will go out when fuse is blown)
  - Dedicated temp and voltage sensor visible from the screen or web interface
  - Power Output
    - 5 Amps Maximum (mini fused blade) per output
      - Wattage per output
        5 Volts: 25 Watts
        12 Volts: 60 Watts
      - Note: The number of amps per output (5A) over 16 outputs is 80 amps and this requires a duty cycle of 20% - see "Power Input" above
      - Heavy duty screw down connections that support spade terminals (four total, two per bank)
  - Power Input
    - 60 Amps Normal / 30 Amps per bank / two individual bank inputs
      - NOTE: This unit is able to handle up to 60 amps of power but requires an additional power supply to do so
      - Wattage per bank (1-8 and 9-16)
        5 Volts: 150 Watts
        12 Volts: 360 Watts
      - Wattage per controller (1 - 16)
        5 Volts: 300 Watts
        12 Volts: 720 Watts
        Note that many customers run controllers at levels below 100% using the output limiting function in the firmware settings
Warranty
- All items excluding controller board - 1 Year Warranty
  - Power Supply
  - Enclosure
  - Cable Pigtails / Cables
  - Assembly Labor
  - For warranty details - click here
- Controller board only
  - None
  - 1 Year
  - 3 year
  - For information on why we offer a variable controller board warranty - click here
Support
- The majority of our setup and troubleshooting information and videos can be found on our setup pages
  - AlphaPix Evolution
  - HinksPix Pro
- Support options:
  - Normal Support - Email / Phone where required, no additional cost
  - Priority Support - Dedicate phone number / Remote Control to PC / Email where required, additional cost
- HolidayCoro offers support in the following areas with this controller:
  - General wiring and troubleshooting
  - Testing of pixels (some non-HolidayCoro pixels may have limited support)
  - General setup of the networking needed to support the connection of the controller a Windows PC
  - Basic configuration of sequencing applications
  - Basic configuration of output to the RS485 output ports
  - Complex networking environments
- HolidayCoro does not support the following:
  - Sending data over wireless networks
  - Configuration of some applications (due to the huge number of applications, we may refer you to your application vendor for instructions on setting up their application)
  - Configuration or troubleshooting of individual sequences - please contact your vendor for application specific questions
Physical
- Operating Temperatures - Negative 4f (-20c) to 158f (+70)
County of Origin / Assembly
- China (from globally sourced components)
Country of Design
- AlphaPix: USA / China
- HinksPix: USA
- Flex Expansion: USA / China

16 Port SPI Output Limits with Common HolidayCoro Pixels
	Without Power Injection 100% Duty Cycle @ 100% Full White Output / May require one power supply per bank 60 Amp input		With Power Injection @ 100% Full White Output / Requires external power supplies) NOTE: HolidayCoro does not provide or endorse power injection. Customers should be fully aware of power injection wiring requirements.
	Maximum Per SPI Output	Maximum Per SPI Expansion Board	Maximum Per SPI Output	Maximum Per SPI Expansion Board
30LED/10IC Pixel Strip - 5 Meters	1	16	6	108
30LED/30IC Pixel Strip - 5 Meters	1	16	2	36
48LED/16IC Pixel Strip - 5 Meters	0	0	4	69
60LED/20IC Pixel Strip - 5 Meters	0	0	3	55
60LED/60IC Pixel Strip - 5 Meters	0	0	1	18
8mm/12mm Pixel Node (bullet or flat/square) - 5v	83 Nodes	1,328 Nodes	340 Nodes	5,440 Nodes
8mm/12mm Pixel Node (bullet or flat/square) - 12v	111 Nodes	1,776 Nodes	340 Nodes	5,440 Nodes
Rectangle or Square Pixel Modules - 12v	78 Modules	1,248 Modules	340 Modules	5,440 Modules
Brilliant Bulb (single bulb)	125 Bulbs	2,000 Bulbs	340 Bulbs	5,440 Bulbs

NOTES: The above maximum recommendations can vary based on a variety of factors including - voltage, wire gauge, distance between pixels, temperature, color of light output, controller duty cycle, customer expectations of color rendering and other factors.

You might also be interested in...

Smart / Pixel RGB LED Node 8mm/12mm / 12v / 2811 / 50 Node String / 3" Spacing / Black / Waterproof EasyPlug3 Input and Output Cables

100 Count / 5 x 20 / Mini Matrix / Pixel Icicles (Ships late June 2020)

Our Price: $23.49

Add

Our Price: $42.99

Add

Average Rating: Average Rating: 5 of 5

5 of 5 Total Reviews: 6 Write a review »

0 of 0 people found the following review helpful:

	June 10, 2020
Reviewer: Frank Chris from Wyoming, MI United States

Was this review helpful to you?

0 of 0 people found the following review helpful:

	March 22, 2020
Reviewer: Nick from West Chester, OH United States

Was this review helpful to you?

0 of 0 people found the following review helpful:

Very happy!	November 25, 2019
Reviewer: Nathan from IL United States

The controller and everything is done! All you have to do is plug it in and connect to your network by Ethernet. Very pleased with this setup.

Was this review helpful to you?

1 of 1 people found the following review helpful:

16 SPI Output Flex Expansion E1.31 Controller + 35	November 15, 2019
Reviewer: Moe from Escalon CA

This Is, great well built well designed AMAZING thank you Holiday Coro.

Was this review helpful to you?

0 of 0 people found the following review helpful:

AlphaPix 16 E1.31 Controller	December 12, 2018
Reviewer: Rick from Evans, GA United States

As the first controller I have purchased, the bar is set pretty high for anything that comes later. Despite ordering this late in the year, it shipped as expected and arrived assembled and ready to run. The videos by HolidayCoro helped in testing and setup to get this integrated into my show quickly.

Was this review helpful to you?

View All Customer Reviews