Home > Packaged Kits > RGB Pixel MegaTree Packages >

SOLD OUT UNTIL DEC 8TH: QuickTree Pixel MegaTree / 360 Degrees / 1,600 Pixels (32 strings x 50 pixels) / Ready2Run Assembled / 5v
SOLD OUT UNTIL DEC 8TH: QuickTree Pixel MegaTree / 360 Degrees / 1,600 Pixels (32 strings x 50 pixels) / Ready2Run Assembled / 5v
Photo shows 10 Visable Strands


 
Additional Photos:


Our Price: $1,489.96


Availability / Ships: Same Day, Sporadically up to 3 days (Delivery Time Information)
Product Code: 813-360


The following items are included with this product:

CPU Type and Options

Click Here For Detailed Comparison of CPU Functions

AlphaPix Evolution CPU [Add $29.95]
   - Network Switch, e1.31/sACN/ArtNet, No FM/Audio Output

SOLD OUT FOR 2021:
HinksPix Pro CPU [Add $999.99]
   - Network Switch, e1.31/sACN/ArtNet/DDP, Advanced Features, Play-On-Controller Upload (Requires SD Card), Line Level Audio Output, Wi-Fi

SOLD OUT FOR 2021:
HinksPix Pro CPU + 32gb SD Card [Add $999.99]
   - Network Switch, e1.31/sACN/ArtNet/DDP, Advanced Features, Play-On-Controller Upload, Line Level Audio Output, Wi-Fi

MegaTree Height and Width

8.5 Ft Tall x 4.5 Ft Wide / 2 In Spacing
Black Mounting Strip / 32 * 50 Pixels / 15 to 50 Feet
Height includes 1 Ft / .3m Gap at Bottom
Metric: 2.6m Tall x 1.4m Wide / 51mm Spacing

10.8 Ft Tall x 5 Ft Wide / 2.5 In Spacing
Black Mounting Strip / 32 * 50 Pixels / 20 to 75 Feet [Add $22.20]
Height includes 1 Ft / .3m Gap at Bottom
Metric: 3.3m Tall x 1.5m Wide / 63.5mm Spacing

12.5 Ft Tall x 6.5 Ft Wide / 3 In Spacing
Black Mounting Strip / 32 * 50 Pixels / 25 to 150 Feet [Add $44.99]
Height includes 1 Ft / .3m Gap at Bottom
Metric: 3.8m Tall x 2m Wide / 76.2mm

Pre-Configured Input Voltage & Plug Type

110 / 120v @ 60Hz Input / Type B Plug (United States, Canada, Mexico, Others)
220 / 240v @ 50Hz Input / Type I Plug (Australia, NZ, China)
220 / 240v @ 50Hz Input / Type F Plug (Most of Europe and Russia)
220 / 240v @ 50Hz Input / Type G Plug (United Kingdom / Ireland / Singapore)
220 / 240v @ 50Hz Input / Type B Plug (United States, Canada, Mexico, Others)
    Click here for voltage and plug details
Setup and Troubleshooting Assistance

Regular Support (E-Mail Only) - Included with controller purchase [No Additional Cost]
Priority Support (E-Mail/Phone/Remote Control) / 30 Mins per $1,000 Spent Per Order [Included]
OPTIONAL: Click here for detailed information about support levels, response times and support for non-HolidayCoro products (opens in new tab)
Controller Warranty Period

AlphaPix / HinksPix / EasyLights Controller - No Warranty / No Return [No Additional Cost]
AlphaPix / HinksPix Controller - 1 Year Warranty (Ready2Run Assembled) [Add $15.99]
AlphaPix / HinksPix Controller - 3 Year Warranty (Ready2Run Assembled) [Add $29.99] 
Click here for detailed information about our warranty policy (opens in new tab)
Click here for information on why we offer warranty options (opens in new tab)
  - Warranty period cannot be adjusted after purchase
 - Controller hardware is identical for all warranty levels
Pixel Installation Jig for Pixel Node Strip

Pixel Node Strip Installation Jig [Add $14.99]
Output Board #2 (Optional)

No Expansion Board #2

1 of Flex 4 Cable Output / Long Range Differential Expansion Board [Add $49.95]
   - One Long Range board can handle up to 4 to 16 Long Range Differential Receivers
   - Long Range Receivers require power separate of Expansion Board
   - Only one Power supply is required for up to 3 Long Range Expansion Boards
   - Ready2Run Receivers and CAT5 Cable Sold Separately - Purchase Here

CAT5 Ethernet and Long Range Data Signal Cable

No Data Cable - I'll Provide My Own
7 Foot / 2.1 Meter Green CAT5 Data Cable for Data Signal [Add $2.79]
10 Foot / 3 Meters Green CAT5 Data Cable for Data Signal [Add $2.99]
25 Foot / 7.6 Meter Green CAT5 Data Cable for Data Signal [Add $5.79]  - Save $.50
50 Foot / 15 Meter Green CAT5 Data Cable for Data Signal [Add $9.79]  - Save $.70
100 Foot / 30 Meter Green CAT5 Data Cable for Data Signal [Add $14.95]  - Save $2.00
200 Foot / 60 Meter Green CAT5 Data Cable for Data Signal [Add $22.49]  - Save $2.00
Click Here For Complete CAT5 List and Accessories
Backorder / Shipping Delay

I am aware my ENTIRE order will ship Dec 3 - Dec 10th 2021
^^^ CLICK THE ABOVE CHECK BOX TO CONFIRM THAT YOU ARE FULLY AWARE THAT THIS PRODUCT IS ON BACKORDER

Qty:  
[Product Description Page]
 
.
Ryan's Pixel MegaTree
(Similar Design)
What is in the kit
AlphaPix: How to setup controller and sequencing application
HinksPix: How to setup controller and sequencing application
Product Features
We include all the lights and mounting hardware, controllers, power and cabling required to complete your project and you can purchase it in DIY if you feel comfortable building it yourself or fully assembled and tested by Holidaycoro, ready to run out of the box. If the following tree doesn't meet your requirements, see our other selections of pre-designed Pixel MegaTrees.


360 Degrees of Coverage
Ideal Viewing Distance From Audience
Varies (see above)
Items Suitable for Display
Scrolling text, singing faces,
animated graphics
Ease of Sequencing Moderate - Requires
custom sequences
It is possible to "mirror" sequences on the front and back of the tree
Pixel Counts
Total Pixel Nodes per Tree 1,600
Vertical Sections / Strings 32
Pixel Nodes per Section / String 50 Nodes
Pixel-To-Pixel Spacing 2.0, 2.5, 3.0 Inches
Tree Dimensions
Height (Pixel Area)
8.7, 11.2, 13.8 Feet
Height (Overall Maximum) 9.2, 11.7, 14.3 Feet
Width (Pixel Area) 4.5, 6.0, 6.6 Feet
XXX XXX
Width - Top of Tree 7.5 Inches
Pixel Spacing - Top (Horizontal / Pixel-to-Pixel) 1.5 Inches
Pixel Spacing - Bottom (Horizontal / Pixel-to-Pixel) 6.0, 8.0, 8.5 Inches
General
Power Injection Required / Cables per Strand
No / One Cable
Type of pixel used
8mm RGB LED with 12mm Body
Assembly
Controller - Pre-wired with power and cables
Optionally Available as Pre-Assembled
Lights - Pre-wired with waterproof connections
Optionally Available as Pre-Assembled
Lights / Nodes pre-installed into PixNode Strips
No
Usually 60 to
120 Minutes
Overall erection time for entire tree
(with assembled hardware)
Usually
90 Minutes
DIY Customer assembly time
(excludes erection time)
3 Hours (Experienced)
4 to 7 Hours (Novice)
Additional Required Items (Sourced by Customer)
Center Pole - 1-3/8" Top Rail Tubing
(Home Depot, Lowes, Menards)
One, 10 Foot Section (under 10' tall)
Two, 10 Foot Sections (over 10' tall)
8 Inch to 12 Inch Galvanized Nail / Stakes
(Home Depot, Lowes, Menards)
35
Tent Stake / Re-Bar or Similar
(Depends on local soil and ground conditions)
3 for Low Wind Load Areas
4 for High Wind Load Areas
Sequencing Software Works with 100% of all Holiday Sequencing
Software on the market including:
xLights
Light-o-Rama S3 & S4
xLights /Nut Cracker
Computer / Show PC Requires PC with Ethernet
network port (nearly all have this)

Type and power of PC
depends on sequencing software
selected by customer.

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 9 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 Good product, but instructional videos are lacking November 29, 2021
Reviewer: Chris from Georgia  
I was eventually able to get my tree up and running and am very happy with it. The quality of the product is pretty solid and everyone loves the tree.  No major complaints with the quality, although I was a few feet short on the extreme strip provided after I cut it to the lengths they specified.

I was pretty disappointed with the instructional videos provided with the components. They are very scattered to find and many of them just show someone talking about what to do while looking at pictures of equipment. They really need to make videos showing someone actually assembling and configuring all of this from beginning to end with the components. It probably took two or three times as long as it should have to plan and assemble everything because of this.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Great product, instructions are out of date November 22, 2021
Reviewer: Neil Hutchison from Hudsonville, MI United States  
Overall this is a really great product, and for myself learning a setup for the first year, the one string per output makes things very easy.  With a little knowledge learned from setting up the tree, the controller can be easily expanded to control more props, and expand the show later.
One small issue was that only half the extension cables were in the order (16/32). Support  fixed this really quickly and were great to talk with.  Overall, the tree looks great, but expect a little figuring out yourself.  Would be great to see updated instructions, or at least specific details for the height of tree you buy as the pixel strips are height specific.  That's not clear in the general instructions, but is hidden somewhere else on the site!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Much better than expected.. June 6, 2021
Reviewer: John B. from Bloomfield, NJ United States  
Ok, so it's really the little things.. I expected a quality product and clearly got it.. but what blew me away were the labels on the tails..  clear, informative, and likely will last years..  Still assembling pixel strings but looking forward to lighting this up .. Thank you for a great product line and phenomenal support!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome 10' Megatree December 9, 2020
Reviewer: Darryl Milligan from Raleigh, NC United States  
Tree does take some time to push the pixels. The result is awesome. Also got the All I want for Christmas is you Sequence. Looks great. Family loves it.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Wow October 25, 2020
Reviewer: M. HARPER from CANTON, OH  
Setup was easy. Cannot wait to get this installed outside for the holiday.

Was this review helpful to you?

View All Customer Reviews