Home > By Location / Season > By Season - Christmas >

Santa And Reindeer In Jet Airplane Waving Prop Compatible with xLights, LOR; Supports 12mm Nodes, Seed Pixels, Mini-Lights; Print Optional [855 Pixels, 94.5in x 51.2in, OVERSIZED]
PRODUCT PHOTO: Santa and Reindeer In Jet Airplane Waving
May Show Computer Rendered Photo of Product
Printed Designs Offered Optionally
  
Our Price: $80.22



Availability / Ships: Click Here for Current Schedule
Product Code: 4088-3

What Type Of Lights Will Be Used In This Prop?

12mm Bullet Pixel Node
Seed / Pebble Pixel using SecureSeedLock(tm) Technology [Add $4.95]
AC Mini-Light (.1875 in) [Add $9.95]
Twinkly Gen2 RGB (4.3mm LED) [Add $9.95]
None - No Holes in Prop [Subtract -$4.95]
    Click here for how to select different hole options

What Material and Color for This Prop?

BLACK 10mm Coro X-Brace UV and Fire Resistant Plastic [No Cost]
WHITE 10mm Coro X-Brace UV and Fire Resistant Plastic [No Cost]

Do You Need a Pattern On the Back of This Prop?

NO - I Will Use the Model for the Installation Path [No Cost]
Do You Need a Splice Plate?

NO - No Splice Plate(s) Necessary [No Cost]
YES - Include Splice Plate(s) [Add $9.99]
    Optional - Not required for most small props



Qty:  

  
[Product Description Page]
 
.
Product Features
  • General Product Information
    • Produced from weather resistant and strong plastic (see below for details)
  • Pixel Count: 855
  • Optional items: Pixel Pliers for installing nodes (highly recommended)
  • Technical Specifications
    • Material thickness: 10mm
    • Overall dimensions:
      • Wide: 94.5 inches / 2400 mm
      • Tall: 51.2 inches / 1300 mm
    • Maximum Center To Center Spacing Between Any Two Pixels in Prop: Contact Us inches / Contact Us mm
    • Pixel Hole Size: .45 inches / 11.4 mm
    • Temperature Range: -17f to +160f
    • Material Composition: Polypropylene
  • County of Origin
    • Assembly/Mfg: USA (Texas)
    • Materials/parts: China
  • Warranty
    • 365 days from date of purchase
    • See our warranty policy for more information
  • Product Revision History
    • Initial design: 23-Aug-2024

Average Rating: Average Rating: 3 of 5 3 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
3 of 5 Jet plane September 17, 2025
Reviewer: STEPHEN BRADLEY from Danville, IN United States  
This is a cool prop for sure, the Coro is so hard and dense it's extremely difficult to push pixels through especially where it’s doubled up. The pixels don’t snap in like most Coro. The tail of the plane needs a lot more support, mine showed up and due to packaging the tail was bent and now it's going to need a frame just to stand up, a weak spot for sure. Would very much appreciate submodels for the various parts and faces as the xmodel has none and it's quite the challenge to define what's what on the faces.

Was this review helpful to you?