Home > By Location / Season > By Season - Christmas >

Magic Mouse Flake Prop Compatible with xLights, LOR; Supports 12mm Nodes, Seed Pixels, Mini-Lights; Print Optional [280 Pixels, 37.4in x 37.4in]
PRODUCT PHOTO: Magic Mouse Flake
May Show Computer Rendered Photo of Product
Printed Designs Offered Optionally
  
Our Price: $40.50



Availability / Ships: Click Here for Current Schedule
Product Code: 6118

What Type Of Lights Will Be Used In This Prop?

12mm Bullet Pixel Node
Seed / Pebble Pixel using SecureSeedLock(tm) Technology [Add $4.95]
AC Mini-Light (.1875 in) [Add $4.95]
Twinkly Gen2 RGB (4.3mm LED) [Add $4.95]
None - No Holes in Prop [Subtract -$4.95]
    Click here for how to select different hole options

Would You Like Graphics on the Front of This Prop?


    Click here for graphic print samples
    Click here for how select custom colors and custom tiled graphics
For Solid Colors - Enter the Code Below:

    


NOTE: On‑screen colors might differ from printed results due to display variations
What Material and Color for This Prop?

BLACK 10mm Coro X-Brace UV and Fire Resistant Plastic [No Cost]
WHITE 10mm Coro X-Brace UV and Fire Resistant Plastic [No Cost]

Do You Need a Pattern On the Back of This Prop?

NO - I Will Use the Model for the Installation Path [No Cost]
YES - Back Side Printing of Light String Path in Full Color with Pixel Counts [Add $9.99]
    Click here for information on pixel path printing

Do You Need a Splice Plate?

NO - No Splice Plate(s) Necessary [No Cost]
YES - Include Splice Plate(s) [Add $9.99]
    Optional - Not required for most small props


Confirm The Purchase of This Custom Item

I understand this prop is custom and cannot be returned or refunded after purchase

Qty:  
[Product Description Page]
 
.
Neil Slingerland's Completed Prop
Product Features
  • General Product Information
    • Produced from weather resistant and strong plastic (see below for details)
  • Pixel Count: 280
  • Optional items: Pixel Pliers for installing nodes (highly recommended)
  • Technical Specifications
    • Material thickness: 10mm
    • Overall dimensions:
      • Wide: 37.4 inches / 950 mm
      • Tall: 37.4 inches / 950 mm
    • Maximum Center To Center Spacing Between Any Two Pixels in Prop: 2.98 inches
    • Pixel Hole Size: .45 inches / 11.4 mm
    • Temperature Range: -17f to +160f
    • Material Composition: Polypropylene
  • County of Origin
    • Assembly/Mfg: USA (Texas)
    • Materials/parts: China
  • Warranty
    • 365 days from date of purchase
    • See our warranty policy for more information
  • Product Revision History
    • Initial design: 23-Aug-2024

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Mouse snow flake September 17, 2025
Reviewer: Juan Ambriz from Bakersfield, CA United States  
I bought this for my wife, she's a big "D" Fanatic. I will admit it was a little difficult trying to add this into my sequence but with a little help from YouTube videos that helped me out.  I would like to add to be careful when all the pixel lights are in the snowflake as some of the areas can be a little too heavy for the end pieces of the Mouse flakes and can bend. You could add some small thin pieces of support in the back and just zip tie them. Over all great prop and it's pretty big but yet affordable.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Magic Mouse flake is good! October 16, 2024
Reviewer: Neil S. from egg Harbor Twp, NJ United States  
I have to say that this is def a good product, however the arms of the snowflake near the center are extremely flimsy and will bend with the weight of the pixels in them. I do recommend getting the pixel path printed as I did not it it’s not an easy model to follow. Other then the arms needed some strength, it’s a good prop and looks great lit up!

Was this review helpful to you?