Home > Packaged Kits > RGB Pixel MegaTree Packages >

QuickTree Pixel MegaTree / 180 Degrees / 800 Pixels (16 pixels x 50 pixels) / Ready2Run Assembled / 5v
PRODUCT PHOTO: QuickTree Pixel MegaTree / 180 Degrees / 800 Pixels (16 pixels x 50 pixels) / Ready2Run Assembled / 5v
Tree photo shows 10 Visible Strands
 
Additional Photos:
Our Price: $799.99



Availability / Ships: Usually Ships in 24 Hours
Product Code: 813-180


The following items are included with this product:

CPU Type and Options

Click Here For Detailed Comparison of CPU Functions [Add $999.99]

AlphaPix Evolution CPU [Add $109.99]
   - Network Switch, e1.31/sACN/No FM/Audio Output

HinksPix Pro V2 CPU [Add $195.95]
   - 48 Ports, 24k Pixels, Network Switch, e1.31/sACN/ArtNet/DDP, Advanced Features, Play-On-Controller Upload (Requires SD Card), Line Level Audio Output, Wi-Fi

HinksPix Pro CPU V2 + 32gb SD Card [Add $209.95]
   - 48 Ports, 24k Pixels, Network Switch, e1.31/sACN/ArtNet/DDP, Advanced Features, Play-On-Controller Upload, Line Level Audio Output, Wi-Fi

HinksPix Pro V3 CPU [Add $269.95]
   - 80 Ports (physical cable limits may apply), 81k Pixels, Network Switch, e1.31/sACN/ArtNet/DDP, Advanced Features, Play-On-Controller Upload (Requires SD Card), Line Level Audio Output, Wi-Fi

HinksPix Pro CPU V3 + 32gb SD Card [Add $279.95]
   - 80 Ports (physical cable limits may apply), 81k Pixels, Network Switch, e1.31/sACN/ArtNet/DDP, Advanced Features, Play-On-Controller Upload, Line Level Audio Output, Wi-Fi, Compatible SD Card, SD Card to USB A Adapter

MegaTree Height and Width

8 Ft Tall x 4 Ft Wide / 1.7 In Spacing
Black Mounting Strip / 16 * 50 Pixels
Height includes 1 Ft / .3m Gap at Bottom
Metric: 2.4m Tall x 1.2m Wide / 43mm Spacing

8.5 Ft Tall x 4.5 Ft Wide / 2 In Spacing
Black Mounting Strip / 16 * 50 Pixels
Height includes 1 Ft / .3m Gap at Bottom
Metric: 2.6m Tall x 1.4m Wide / 51mm Spacing

10 Ft Tall x 5 Ft Wide / 2.1 In Spacing
Black Mounting Strip / 16 * 50 Pixels [Add $7.49]
Height includes 1 Ft / .3m Gap at Bottom
Metric: 3m Tall x 1.5m Wide / 53mm Spacing

10.8 Ft Tall x 5 Ft Wide / 2.5 In Spacing
Black Mounting Strip / 16 * 50 Pixels [Add $10.00]
Height includes 1 Ft / .3m Gap at Bottom
Metric: 3.3m Tall x 1.5m Wide / 63.5mm Spacing

12 Ft Tall x 6 Ft Wide / 2.55 In Spacing
Black Mounting Strip / 16 * 50 Pixels [Add $16.49]
Height includes 1 Ft / .3m Gap at Bottom
Metric: 3.6m Tall x 1.8m Wide / 64mm

12.5 Ft Tall x 6.5 Ft Wide / 3 In Spacing
Black Mounting Strip / 16 * 50 Pixels [Add $18.00]
Height includes 1 Ft / .3m Gap at Bottom
Metric: 3.8m Tall x 2m Wide / 76.2mm

Pre-Configured Input Voltage & Plug Type

110 / 120v @ 60Hz Input / Type B Plug (United States, Canada, Mexico, Others)
220 / 240v @ 50Hz Input / Type I Plug (Australia, NZ, China)
220 / 240v @ 50Hz Input / Type F Plug (Most of Europe and Russia)
220 / 240v @ 50Hz Input / Type G Plug (United Kingdom / Ireland / Singapore)
220 / 240v @ 50Hz Input / Type B Plug (United States, Canada, Mexico, Others)
    Click here for voltage and plug details
Setup and Troubleshooting Assistance

Regular Support (E-Mail Only) - Included with controller purchase [No Additional Cost]
Priority Support (Phone & Remote Control) - Purchased Separately [$69.99 to $159.99]
OPTIONAL: Click here for detailed information about support levels, response times and support for non-HolidayCoro products (opens in a new tab)
Controller Warranty Period

AlphaPix / HinksPix Controller - 30 Day Factory Defects Only [No Additional Cost]
AlphaPix / HinksPix Controller - 1 Year Warranty (Ready2Run Assembled) [Add $15.99]
AlphaPix / HinksPix Controller - 3 Year Warranty (Ready2Run Assembled) [Add $29.99] 
Click here for detailed information about our warranty policy (opens in new tab)
Click here for information on why we offer warranty options (opens in new tab)
  - Warranty period cannot be adjusted after purchase
 - Controller hardware is identical for all warranty levels
Pixel Installation Jig for Pixel Node Strip

Pixel Node Strip Installation Jig [Add $7.99]
Output Board #2 (Optional)

No Expansion Board #2

1 of Flex 4 Cable Output / Long Range Differential Expansion Board [Add $49.95]
   - One Long Range board can handle up to 4 to 16 Long Range Differential Receivers
   - Long Range Receivers require power separate of Expansion Board
   - Only one Power supply is required for up to 3 Long Range Expansion Boards
   - Ready2Run Receivers and CAT5 Cable Sold Separately - Purchase Here

CAT5 Ethernet and Long Range Data Signal Cable

No Data Cable - I'll Provide My Own
10 Foot / 3 Meters Green CAT5 Data Cable for Data Signal [Add $3.49]
25 Foot / 7.6 Meter Green CAT5 Data Cable for Data Signal [Add $5.49]
50 Foot / 15 Meter Green CAT5 Data Cable for Data Signal [Add $8.99]
100 Foot / 30 Meter Green CAT5 Data Cable for Data Signal [Add $18.99]
200 Foot / 60 Meter Green CAT5 Data Cable for Data Signal [Add $42.99]
Click Here For Complete CAT5 List and Accessories

Qty:  
[Product Description Page] [FAQ & Documentation Page]
 
.
Ryan's Pixel MegaTree
(Similar Design)
What's in the Kit
AlphaPix: How to setup controller and sequencing application
HinksPix: How to setup controller and sequencing application
Product Features

Our QuickTree with the AlphaPix controller is fully assembled and tested by HolidayCoro, ready to run out of the box. If the following tree doesn't meet your requirements, see our other selections of pre-designed Pixel MegaTrees.

Sample of build by customer:


180 Degrees of Coverage
Ideal Viewing Distance From Audience
Varies (see above)
Items Suitable for Display
Scrolling text, singing faces,
animated graphics
Ease of Sequencing Moderate - Uses Commonly Available 50 x 16 "CCR' Sequences for Christmas and Halloween
Pixel Counts
Total Pixel Nodes per Tree 800
Vertical Sections / Strings 16
Pixel Nodes per Section / String 50 Nodes
Pixel-To-Pixel Spacing 2.0, 2.5, 3.0 Inches
Tree Dimensions
Height (Pixel Area)
8.7, 11.2, 13.8 Feet
Height (Overall Maximum) Including 6 Inch gap at base 9.2, 11.7, 14.3 Feet
Width (Pixel Area) 4.5, 6.0, 6.6 Feet
Width - Top of Tree 7.5 Inches
Pixel Spacing - Top (Horizontal / Pixel-to-Pixel) 1.5 Inches
Pixel Spacing - Bottom (Horizontal / Pixel-to-Pixel) 6.0 , 8.0, 8.5 Inches
General
Power Injection Required / Cables per Strand
No / One Cable
Type of pixel used
8mm RGB LED with 12mm Body
Assembly
Controller - Pre-wired with power and cables
Ready2Run Assembled and Tested
Lights - Pre-wired with waterproof connections
Ready2Run Assembled and Tested
Lights / Nodes pre-installed into PixNode Strips
No
Usually 30 to
60 Minutes
Overall erection time for entire tree
(with assembled hardware)
 Usually
60 Minutes
PC and Sequencing Setup 60 minutes to 2 Days Depending on Customer Skill
Additional Required Items (Sourced by Customer)
Center Pole - 1-3/8" Top Rail Tubing
(Home Depot, Lowes, Menards) 		One, 10 Foot Section (under 10' tall)
Two, 10 Foot Sections (over 10' tall)
8 Inch to 12 Inch Galvanized Nail / Stakes
19
Tent Stake / Re-Bar or Similar
(Depends on local soil and ground conditions) 		3 for Low Wind Load Areas
4 for High Wind Load Areas
Guy Wires or Rope 3 for Low Wind Load Areas
4 for High Wind Load Areas
Sequencing Software Works with 100% of all Holiday Sequencing
Software on the market including:
Light-o-Rama S4 / S5
xLights
LightShow Pro
Vixen 3
Computer / Show PC Requires PC with Ethernet
network port (nearly all have this)

Type and power of PC
depends on sequencing software
selected by customer.

Assembly Instructions / Information:

For each tree, there is a roll of pixel strip that needs to be divided into 16 individual sections. We recommend counting out 62 holes (1 at the top for the topper connection, 50 for the pixels, 11 for additional gap at the bottom) and then using that "master" strip against the next length to cut each of the 16 sections. You should end up with a small amount of strip when complete. Here is a chart that shows the specific lengths for each tree type:

Height Width Hole to Holes Spacing Total Length of Provided
Mounting Strip 		# of Strips Length of Individual Strip # of Holes per Individual Strip
8.5 Ft 4.5 Ft 2.0 Inches 175 16 10.5 Feet 62
10.8 Ft 5.0 Ft 2.5 Inches 212 16 13.0 Feet 62
12.5 Ft 6.5 Ft 3.0 Inches 250 16 15.5 Feet 62

Helpful Tips:
  • It is not necessary to fold over the mounting strip when sliding into the topper slots since this product ships with the thicker Extreme Strip.
  • You may or may not need the strain relief tabs at the bottom of the tree depending on your specific mounting method.
  • Be sure to leave enough space at the bottom of the tree to allow for snow, grass and non-flat lawns.

You might also be interested in...
5 Port 10/100 Ethernet Network Switch for E.131 Networks
Our Price: $17.99

Add
PRODUCT PHOTO: 5 Port 10/100 Ethernet Network Switch for E.131 Networks

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 42 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect for beginners January 23, 2023
Reviewer: Benji Pilotte from Fort Lauderdale, FL United States  
Easy to set up. Pixel pusher is highly recommended

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 December 28, 2022
Reviewer: Albert Cunningham from Riverview, FL United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Read Up and Show Off Christmas December 22, 2022
Reviewer: Josh Holt from Hillsboro, OR United States  
This DIY kit is complete, well thought out and is flexible. It does not come with an assembly manual so it still requires some engineering. HolidayCoro provides some guides online--make sure you read them before you jump in and order. Some additional materials are needed to set it up. There are some good online 3rd party videos that suggest how to set it up too. It took several hours (and gloves!) to push the pixels into the strips. I did it in intervals to avoid blisters. The quality and technology is great. With xLights and Falcon FPP running on Pi or BeagleBone, I have a pretty cool Christmas show running now.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Best kit on the market September 3, 2022
Reviewer: michael klima from Brandon, FL United States  
I have done alot of research from other suppliers diy kits and piecing together. I was lost what to pick out. I gave holiday coro call/email they had put together a complete package with the 24 in star what I was gonna need and explain what type of piping to erect the size tree. I can't wait to see the people faces in the neighborhood. And adding this 12.5 foot tree the next neighbor gave go ahead to use there yard to complete my christmas/halloween setup for the kids in the neighborhood. Let holiday coro build you the best light show imaginable.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome product and easy to setup. December 6, 2021
Reviewer: Trey Lester from Stillwater, OK United States  
I loved the Product. Made everything simple. The only downside is that the pixels are hard to get in the strips. even with the special tool. I was aware of that beforehand, but just know you will have some sore hands after putting those in.

One other thing I should mention. Bigger isn't always better. If I were doing things over again I would get  a shorter Mega tree. You trade some image clarity for height. That is not a problem with the product at all. It was a problem with me not taking my yard size into consideration. But it still looks pretty awesome.

Was this review helpful to you?

View All Customer Reviews