Home > Packaged Kits > RGB Pixel MegaTree Packages >

CCR Pixel MegaTree Kit - 16 Strips/Ribbons / 800 Pixels / 2,400 DMX Channels / Ready2Run Assembled / Regular Output - 350w
HolidayCoro.com 16 Ribbon Pixel MegaTree
Photos show 12 Strip Kit
Shown assembled
Star not included
Zip Ties Not Included
 
Additional Photos:
Light-O-Rama "CCR" Solution $1,319.95
Our Price: $799.99
You Save: $519.96


Availability / Ships: Same Day, Sporadically up to 3 days (Delivery Time Information)
Product Code: 814


The following items are included with this product:

CPU Type and Options

Click Here For Detailed Comparison of CPU Functions

Pre-Configured Input Voltage & Plug Type

110 / 120v @ 60Hz Input / Type B Plug (United States, Canada, Mexico, Others)
220 / 240v @ 50Hz Input / Type I Plug (Australia, NZ, China)
220 / 240v @ 50Hz Input / Type F Plug (Most of Europe and Russia)
220 / 240v @ 50Hz Input / Type G Plug (United Kingdom / Ireland / Singapore)
220 / 240v @ 50Hz Input / Type B Plug (United States, Canada, Mexico, Others)
    Click here for voltage and plug details
Setup and Troubleshooting Assistance

Regular Support (E-Mail Only) - Included with controller purchase [No Additional Cost]
Priority Support (Phone & Remote Control) - Purchased Separately [$69.99 to $159.99]
OPTIONAL: Click here for detailed information about support levels, response times and support for non-HolidayCoro products (opens in a new tab)
Controller Warranty Period

AlphaPix / HinksPix Controller - 30 Day Factory Defects Only [No Additional Cost]
AlphaPix / HinksPix Controller - 1 Year Warranty (Ready2Run Assembled) [Add $15.99]
AlphaPix / HinksPix Controller - 3 Year Warranty (Ready2Run Assembled) [Add $29.99] 
Click here for detailed information about our warranty policy (opens in new tab)
Click here for information on why we offer warranty options (opens in new tab)
  - Warranty period cannot be adjusted after purchase
 - Controller hardware is identical for all warranty levels
Select the Ribbon Mounting Method

I'll Mount Using PVC, EMT or Other DIY Method
Pixel Ribbon Mounting Kit [Add $108.95]
    - Designed for 16 Strip, 180 Degree Ribbon Based MegaTrees, includes:
       * 16 Strip Topper (for use with Extreme Strip)
       * 320 Feet of Extreme Strip
       * 16 of Bottom Strain Reliefs
       * 200 Zip Ties
       * This product not for use with pixel nodes, ribbon only

Output Board #2 (Optional)

No Expansion Board #2

1 of Flex 4 Cable Output / Long Range Differential Expansion Board [Add $49.95]
   - One Long Range board can handle up to 4 to 16 Long Range Differential Receivers
   - Long Range Receivers require power separate of Expansion Board
   - Only one Power supply is required for up to 3 Long Range Expansion Boards
   - Ready2Run Receivers and CAT5 Cable Sold Separately - Purchase Here

CAT5 Ethernet and Long Range Data Signal Cable

No Data Cable - I'll Provide My Own
7 Foot / 2.1 Meter Green CAT5 Data Cable for Data Signal [Add $2.79]
10 Foot / 3 Meters Green CAT5 Data Cable for Data Signal [Add $2.99]
25 Foot / 7.6 Meter Green CAT5 Data Cable for Data Signal [Add $5.79]  - Save $.50
50 Foot / 15 Meter Green CAT5 Data Cable for Data Signal [Add $9.79]  - Save $.70
100 Foot / 30 Meter Green CAT5 Data Cable for Data Signal [Add $14.95]  - Save $2.00
200 Foot / 60 Meter Green CAT5 Data Cable for Data Signal [Add $22.49]  - Save $2.00
Click Here For Complete CAT5 List and Accessories

Qty:  
[Product Description Page]
 
.
What's in the kit
How to construct using the optional Extreme Strip Mounting System
Clark's 16 Strip CCR Tree
How to construct using the optional Extreme Strip
Product Features

This pixel MegaTree includes a completely assembled controller, extension cables and pre-wired lights. If the following tree doesn't meet your requirements, see our other selections of pre-designed Pixel MegaTrees.


180 Degrees of Coverage
Ideal Viewing Distance From Audience
20+ Feet
Items Suitable for Display
Scrolling text, singing faces,
animated graphics
Ease of Sequencing Moderate - Uses Commonly Available
50 x 16 "CCR' Sequences - see this site
Pixel Counts
Total Pixels per Tree 800
Total RGB LEDs per Tree 2,400
Vertical Sections / Strings 16
Width - Top of Tree Varies by Installation
Pixel Spacing - Top (Horizontal / Pixel-to-Pixel) Varies by Installation
Pixel Spacing - Bottom (Horizontal / Pixel-to-Pixel) Varies by Installation
General
Power Injection Required / Cables per Strand
No / One Cable
Type of pixel used
30 LED / 10 IC-Pixel Per Meter (39")
Assembly
Controller - Pre-wired with power and cables
Fully Assembled
Lights - Pre-wired with waterproof connections
Fully Assembled
Overall erection time for entire tree
(with assembled hardware)
 Usually
60 to 240 Minutes
DIY Customer assembly time
(excludes erection time) 		2 Hours (Experienced)
3 to 6 Hours (Novice)
Additional Required Items (Sourced by Customer)
Mounting Hardware See Instructions Here
Varies by Installation
8 Inch to 12 Inch Galvanized Nail / Stakes
16 Typically
Tent Stake / Re-Bar or Similar
(Depends on local soil and ground conditions) 		Varies by Installation
Guy Wires or Rope Not Required or Varies
Sequencing Software Works with 100% of all Holiday Sequencing
See compatible software
Computer / Show PC Requires PC with Ethernet
network port (nearly all have this)

Type and power of PC
depends on sequencing software
selected by customer.


You might also be interested in...
5 Port 10/100 Ethernet Network Switch for E.131 Networks
Our Price: $17.99

Add
5 Port 10/100 Ethernet Network Switch for E.131 Networks

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 21 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent product December 3, 2021
Reviewer: Nathan Vincent from Smiths Grove, KY United States  
This tree is amazing.  Very easy to put together and very bright.  We have lots of traffic looking at the tree.  Installation was a breeze.  Love it!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Mega Tree July 4, 2021
Reviewer: Edward Bridges from Grayson, GA United States  
Excited about this addition.  Always quality stuff and excellent service.   Thank you.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 \ April 11, 2021
Reviewer: Saleen from Turlock, CA United States  
\

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome! December 11, 2020
Reviewer: Crystal N from Temple, TX United States  
The fun I have had this Christmas with my new tree is priceless. I am novice to programming and am so grateful Holiday Coro provided the videos needed to learn how to configure the CPU. Without these “how to” videos, I wouldn’t have this thing set up. Haha! I get so many compliments about it. I have had so much fun creating sequences and I also bought a few from Holiday Coro.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product! December 4, 2020
Reviewer: Mike O'Neill from PARKER, CO United States  
Got the product in September, put it together in October, added it to the show in November, all works out the box, zero issues. Good directions, love the power and brightness it brings to the show. People really enjoy the new element to the display.

Thank you for the products you offer and the follow up e-mails from support to ensure a great experience.

Was this review helpful to you?

View All Customer Reviews