Home > RGB Lights / Bulbs / Strip & Ribbon > Smart / Pixel RGB Lights - Nodes / Bullets >

Smart / Pixel RGB LED Node / 12v / 2811 / 5 Node String / 3" Spacing / Black / 58 Inch EasyPlug3 Input and Output Cables / For Peace Stakes
PRODUCT PHOTO: Smart / Pixel RGB LED Node / 12v / 2811 / 5 Node String / 3" Spacing / Black / 58 Inch EasyPlug3 / xConnect Input and Output Cables / For Peace Stakes


 
Our Price: $4.49


Availability / Ships: Usually Ships in 24 Hours
Product Code: 715-WP

EasyPlug3 Female Pigtail for RGB Pixels

None - I am using HolidayCoro Extensions and/or Controllers
1 of Female EasyPlug3 / Start Pigtail Cable / 18 AWG [Add $1.04]
    - Not required when used with HolidayCoro extensions and controller systems
1 of Female EasyPlug3 / Start Pigtail Cable / 20 AWG [Add $0.79]
    - Not required when used with HolidayCoro extensions and controller systems
EasyPlug3 Male Pigtail for RGB Pixels

None - I am using HolidayCoro Extensions and/or Controllers
1 of Male EasyPlug3 Pigtail Cable / 18 AWG [Add $1.04]
    - Not required when used with HolidayCoro extensions and controller systems
1 of Male EasyPlug3 Output / End Pigtail Cable / 20 AWG [Add $0.79]
    - Not required when used with HolidayCoro extensions and controller systems
To Plug Unused Female Ends & Pigtails

No Plugs for Unused Female Pigtails
1 of Male EasyPlug3/4 Plugs for Female Plugs [Add $0.39]

Qty:  
[Product Description Page]
 
.
Hands on Demo
Product Features

  • Features
  • Lights
    • Total LEDs per node: 3 (Red, Green, Blue)
    • Total LED nodes per string: 5
    • Total DMX channels required per string: 15 DMX Channels
  • Dimensions
    • Overall Length from node 1 to node 5: 15 Inches
    • Node to node (center) distance: 3.5 inches
      • This will work with all "Peace Stakes" with 1 to 3" spacing horizontally
    • Lead in and lead out wire length: 58 inches (both ends) with EasyPlug 3 waterproof plug
    • Maximum diameter of node: 12mm / .47"
    • Length of node body: 30mm / 1.21"
    • Overall length of node and LED: 1.46"
  • Weather
    • Silicone body/base
    • Epoxy sealed body/casing to ensure waterproof wiring and electronics
    • IP68
  • Power
    • Pixel direction is marked with arrows on circuit board (input side), male plug is input side
    • 12v DC Input
    • White (all three colors) per string (5 nodes): 2.5 Watts @ 12v DC (this amount can vary by temperature, wiring to the string and supply voltage)

You might also be interested in...
Peace Pixel Pole for Pixel Nodes Slim Peace Pixel Stakes for Nodes
Our Price: $7.49

Add

Add
PRODUCT PHOTO: Peace Pixel Pole for Pixel Nodes PRODUCT PHOTO: Slim Peace Pixel Stakes for Nodes

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 17 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 In stock! November 26, 2022
Reviewer: Jeremy Shelton from Hurt, VA United States  
I ordered (85) 5-node strings for my peace stakes.  They were all in stock and shipped within an hour of placing the order.  All items worked as expected.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 exceeds expectations November 24, 2022
Reviewer: Robert Shuck from Wesley Chapel, FL United States  
Now days when ordering items online you lucky if 1/2 of the quilty you think you are buying but not here high quility out of the 60 I purchased all were perfact

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect DIY! November 19, 2022
Reviewer: Zachary Lewis from NY United States  
This product saved me from making my own. I wanted to convert large decor plastic C9 14in bulbs into controllable ones to hang on the tree. This worked perfectly. The spacing between the cables was just the right amount. I put 5 in series for 25 nodes running to my pi3.

Love these types of products.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 5 node string November 1, 2022
Reviewer: Calvin Robinson from Macon, GA United States  
Love the looks and the length which makes these 2 a thrilling combo.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Found the long input and output cables useful September 26, 2022
Reviewer: Patrick Lynch from Mount Pleasant, MI United States  
The prop I built required a 10" spacer every 18 pixels. I used the long input and output cables useful for soldering the extra spacing in my pixel string. I saved money over purchasing a 100' length of the black, flat 3 conductor cable that could be bought, when I only needed 5' total. Worked great!

Was this review helpful to you?

View All Customer Reviews