Home > DIY Cables / Mounting / Misc > DIY Extension Wire / Soldering / Shrink Wrap >

Heat Shrink Controller Pigtail Output Identification Labels / .375 Inch Diameter
Heat Shrink Controller Pigtail Output Identification Labels / .375 Inch Diameter
Cable / Pigtails Not Included


 
Additional Photos:


Price:  Pricing varies based on quality and type - See below for exact prices


Availability / Ships: Usually Ships in 24 Hours
Product Code: 745

Pigtail Cable Labels

Outputs 1 to 4 / 12 Volt / Smart Pixel / White Shrink Wrap [Add $0.98]
Outputs 1 to 16 / 12 Volt / Smart Pixel / White Shrink Wrap [Add $2.48]
Outputs 17 to 32 / 12 Volt / Smart Pixel / White Shrink Wrap [Add $2.48]
Outputs 1 to 4 / 5 Volt / Smart Pixel / Yellow Shrink Wrap [Add $0.98]
Outputs 1 to 16 / 5 Volt / Smart Pixel / Yellow Shrink Wrap [Add $2.48]
Outputs 17 to 32 / 5 Volt / Smart Pixel / Yellow Shrink Wrap [Add $2.48]
Outputs 1 to 10 / 12 Volt / Dumb RGB / Blue Shrink Wrap [Add $1.98]
Outputs 1 to 24 / 120 Volt / AC Power / Red Shrink Wrap [Add $1.98]

Qty:  
[Product Description Page]
 
The perfect solution for clearly labeling controller outputs
Product Features
  • Features
    • Selections for use with identification of all common controller output types:
      • Smart Pixel Controllers - 4, 16 and 32 outputs
        • Printed Text: 12v SMART or 5v SMART and OUTPUT XX
        • Length (after shrink) 1.45 Inches / 37 mm
        • 5 Volt Color: Yellow
        • 12 Volt Color: White
      • Dumb DC Controllers - Up to 10 RGB outputs (27 and 30 DMX channels)
        • Printed Text: 12v DUMB and OUTPUT XX
        • Length (after shrink) 1.5 Inches / 38 mm
        • Color: Blue
      • AC Controllers - Up to 24 outputs
        • Printed Text: 120v AC and OUTPUT XX
        • Length (after shrink) 1.3 Inches / 33 mm
        • Color: Red
    • .375 Inch / 9.5mm Diameter prior to shrinking
    • 2:1 Shrink ratio allows use on cables down to .1875 inches / 4.7mm
    • Works with all HolidayCoro QuickPlug3 and QuickPlug4 pigtails and standard AC cables
    • Shrink wrap tubing slides over cable / pigtail prior to installation and is heated to secure in place
    • Will not de-laminate or fall off like stick on labels often do
    • Water proof
    • Color coding by voltage makes identifying controllers quick and easy
    • UV Light Resistant (will not turn yellow or brown with UV exposure)
    • Cold and Heat Resistant
    • Abrasion Resistant
  • Customization
    • We can customize specific wording, lengths and tubing colors (yellow, white, blue, red, clear) with black print (print colors other than black also available for additional charge)
    • .375 inch standard tubing diameter (prior to shrinking)
    • Not available from September through December
    • Available pre-cut into individual tubes at no additional cost
    • Contact us for more details
    • Cost
      • $20 setup for first design (sequential numbers in a design count as a single design), $15 for each additional designs. Proofs are provided prior to production.
      • .11 Cents per inch of printed tubing
      • $50 / 454 inches minimum printed tubing (excluding setup cost)

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 20 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 ID Labels April 13, 2020
Reviewer: Juan Anton from Miami, FL United States  
I recommend every one order these from Holiday Coro. I just went back and re-did my layout and having these labels will save me a lot of stress. Hopefully they will have labels from 33 to 48 soon. Works well on the 20 gauge Easy Plug cables.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 February 16, 2020
Reviewer: Michael Sheehan from Bluffton, OH United States  
As advertised inkine and worked well when heated. Would order again

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Identical January 12, 2020
Reviewer: Randy L Longino from Barnard, KS United States  
These are the same ones that came with controller. They were easy to heat shrink onto plug.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Labels December 12, 2019
Reviewer: Gary Morrison from Pekin, IL United States  
These work perfectly to identify lines or controllers

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Labeling my previous unmarked controller boxes. November 2, 2019
Reviewer: Lowell Hake with Parkway Holiday Lights from BLUE SPRINGS, MO United States  
My slightly older controller boxes did not have proper identification labels on them. This makes it a breeze for hooking up props.

Was this review helpful to you?

View All Customer Reviews