Home > DIY Cables / Mounting / Misc > House Outline and Misc Pixel Mounting Hardware >

Pixel Strip Mounting Hardware Base + Diffuser Cover - 39" / ~1 Meter Length
Pixel Strip Mounting Hardware Base + Diffuser Cover - 39" / ~1 Meter Length
Mounting hardware optional / sold separately


 
Additional Photos:


Our Price: $4.29

(Minimum order):  10

Availability / Ships: Same Day / Delivery Times
Product Code: 766

Strip Mounting Clips (Optional)

None - I'll mount it directly or use my own clips
2 Center and 2 End Mounting Clips (per 39" Section) [Add $0.79]  Click here for photos of optional mounting hardware.
4 Center and 4 End Mounting Clips (per 39" Section) [Add $1.49]

Qty:  
[Product Description Page] [FAQ & Documentation Page]
 
.
Hands on With the Product
Clips and End Mounts Sold Separately
Splicing Strip / Ribbon
Splicing extension wires and pigtails to strip
Product Features
Designed for mounting 12mm RGB Strip. Please measure your strip and verify that it will fit prior to ordering. See the photo above for the complete dimensions for each part of the mounting base.

Not sure if this item is right for your project or you would like to test with your strips? We have 9 inch long sample sections for purchase.

Dimensions of the product, both internally and externally are in the photos of this product.

If you are performing a house outline with RGB pixel strips, also consider a lower cost alternative using PVC pipe and our mounting clips

Internal Channel Width: 12.4mm
Overall width: 17.9mm

HolidayCoro Strip Compatibility Matrix:

Strip Type / Product Link Compatible Notes
30/10 Pixel Strip (RGB)
30/10 Pixel Strip (BRG)
30/10 Pixel Strip (RGB with 10ft leader)

Yes Waterproof plug only accessible on ends of mounting strip and may require manual cutting or splicing of strips for custom installations.

Sufficient space under strip for additional flat cable for 3 wire power injection.
60/20 Pixel Strip (RGB) Yes Waterproof plug only accessible on ends of mounting strip and may require manual cutting or splicing of strips for custom installations.

Sufficient space under strip for additional flat cable for 3 wire power injection.
2801 or other "4 wire" pixel strip (excluding dumb strip) Unknown
or
No
We recommend reviewing the measurements for your strips and ensuring that there is sufficient space inside the hardware for the ENTIRE strip including the silicone waterproof housing.

Maximum width strip: 12.4mm (including any silicone strip)
See side profile in photos to determine compatibility.
RGB Dumb Strip Yes Waterproof plug only accessible on ends of mounting strip.

Sufficient space under strip for additional flat cable for 4 wire (if water proof plugs are removed).
30/30 Pixel Strip

12v WITH buck converter on base of strip
No
Width of strip with waterproofing silicone jacket prevents use.
60/60 Pixel Strip

12v WITH buck converter on base of strip
No
Width of strip with waterproofing silicon jacket prevents use.
Replacement plastic diffuser covers can be found here: http://www.holidaycoro.com/product-p/766-3.htm

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 20 Write a review »

  1 of 1 people found the following review helpful:
 
5 of 5 Simple and easy to install December 2, 2020
Reviewer: Erin Duffey from Fort Worth, TX United States  
The strip base with diffuser cover is very easy to install and looks great with LED strips. I did not use the mounting brackets, instead anchored directly by drilling through the base and attaching with screws.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Mounting strips October 18, 2020
Reviewer: John Z from Gilbert, AZ United States  
Really easy to install with some #6 screws. The diffuser cover clicks on pretty easy.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Pixel Strip Aluminum Base Channel August 19, 2020
Reviewer: Jeffery Miller from China Grove, NC United States  
The aluminum pixel strip base channel is perfect for the Holiday Coro 707-WP 30/10 pixel strips.  I use them without the diffuser cover since my house is about 500 feet away from the road.  I’ve tried to mount the strips on PVC pipe or aluminum angle, and I was always concerned about the zip ties crushing the strip.  Now, with the strip seated in the channel the zip tie keeps the strip seated without crushing the strip.  The base channel is easy to cut for those custom fits.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 September 5, 2019
Reviewer: Kory Hoffhines from COLDWATER, OH United States  


Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
4 of 5 Wonderful but... August 12, 2019
Reviewer: Keenan from Lynwood, IL  
This has really been great when using IP67 strips.  However, I know the UV radiation from the sun will eventually deteriorate the covers and they will need replacing.  Buying a bunch of aluminum that I will be tossing out, doesn't seem to be efficient. I think it would be great if you sold the plastic defuser separately.
--- HOLIDAYCORO RESPONSE ---
While all plastics exposed to UV will break down over time, the life span of this product in UV exposure outdoors can be 2 to 6 years.  Please feel free to reach out to us if there are problems with the plastic and we'll be happy to help resolve that issue.

Was this review helpful to you?

View All Customer Reviews