Home > DIY Products > CAT5 Cables, Plugs & Adapters >

3 Way Female CAT5 Splitter / Combiner 1F/2F 8P8C
CAT5 RJ45 3 Way Splitter 1F/2F
Two adapters shown in this photo


 
Additional Photos:


List Price: $2.99
Our Price: $0.95
You Save: $2.04

Availability/Ships: Same Day / Delivery Times
Product Code: ADAPTER-3WAYFF
Qty:

[Product Description Page]
 

Combines or splits three RJ45 CAT5 male plugs.

Information about the updated design
Product Features
  • Designed for use with CAT5/CAT6 cables
  • Passes all 8 PIN directly through on each port
  • All three ports are female
  • Features 8 individual 24 AWG wires - this unit is not the single-part unit that often have alignment issues
  • WARNING: When used with power over CAT5 (see our KB for more information) - no more than 35 watts of power (3 amps @ 12v DC) should ever be passed over this item (distributed over all 8 wires equally.) Failure to follow these limits can result in damage or fire. If you are unsure if your design is exceeding this limit, please contact us before you connect this product.
  • When used in exterior exposed locations, we recommend a diaelectric spray.

You might also be interested in...
2 Way Female CAT5 Cable Coupler
Our Price: $0.69

Add
CAT5 Inline Female To Female Coupler

Average Rating: 5 of 5 Total Reviews: 28 Write a review »

  0 of 0 people found the following review helpful:
 
Not really a power injection cable October 24, 2017
Reviewer: Quentin Gaudry from Bethesda, MD United States  
IN the end these worked and can be heavily modified to work as power injection cables, but they are truly not plug and play. Just as a heads up to others, you will need to cut the +12V from previous strand so as not to have all of the +12V connected between each power supply and strand. Only the new strand should get the +12V. Finally, and this took me forever to figure out (until Dave helped), you really should cut the data line from the side of the Tee that new power supply injects into. Even though this data line should end without connection at the power supply, you need to cut it as close as possible to the Tee. I think this is due to interference. Anyways, this took over a week to figure out and make these work.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
cant beat them September 10, 2016
Reviewer: JIMMY SARTAIN from BOERNE, TX United States  
very satisfied

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
nice October 18, 2015
Reviewer: Ray Cobb from Baton Rouge, LA United States  
These work great when you need to split DMX signals.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 Way Female CAT5 Splitter June 30, 2015
Reviewer: dollarbillz@bellsouth.net from Lumberton, NC United States  
I use these in my display work great.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
good products January 27, 2015
Reviewer: Ted Martens from Trenton, NJ United States  
great company

Was this review helpful to you?

View All Customer Reviews