Home > DIY Products > RGB Controllers > Smart / Pixel / Intelligent Controllers - Over 170 Pixels (E1.31 Ethernet Based DMX Input) >

16 Output AlphaPix E1.31 Controller + 350 to 700 Watts of Power + Large Enclosure + 16 EasyPlug3 Pigtails / 5,540 Pixels / Ready2Run Assembled
16 Output AlphaPix E1.31 Controller + 350 to 700 Watts of Power + Large Enclosure + 16 EasyPlug3 Pigtails / 5,540 Pixels / Ready2Run Assembled


 

Price Excluding Power Supplies: $305.99


Availability/Ships: Same Day, Sporadically up to 3 days (Delivery Time Information)
Product Code: 845


The following items are included with this product:

EasyPlug3 Male Pigtails (DIY Applications)

16 of Male EasyPlug3 Pigtail Cables [Add $19.99]    - Save $8.65 when purchased with controller
- Male pigtails not necessary when used with HolidayCoro EasyPlug3 Pixel lights
- Male End Only, Female pigtail is already installed with Ready2Run Controllers
- Discounted price only available at time of controller purchase
To Cap Unused Female Plugs

16 of Male EasyPlug3/4 Plugs for Female Pigtails [Add $5.99]
CAT5 Network Data Signal Cable

No Data Cable - I'll Provide My Own
14 Foot / 4 Meter Green CAT5 Data Cable for Data Signal [Add $3.49]
25 Foot / 7.6 Meter Green CAT5 Data Cable for Data Signal [Add $3.99]  - Save $.50
50 Foot / 15 Meter Green CAT5 Data Cable for Data Signal [Add $5.79]  - Save $.70
100 Foot / 30 Meter Green CAT5 Data Cable for Data Signal [Add $8.99]  - Save $2.00
Pre-Configured Input Voltage & Plug Type

110/120 Input Voltage and Input (United States, Canada, Mexico, others) - Type B Plug
220/240 Input Voltage and Input (Australia, NZ, China, Others) - Type I Plug
220/240 Input Voltage and Input (All Other Countries) - Type B Plug 
Click here for voltage and plug details
Power Supply - Bank 1 of 2

1 of 12 Volt / 350 Watt DC Power Supply [Add $23.99]
1 of 5 Volt / 350 Watt DC Power Supply [Add $23.99]
Power Supply - Bank 2 of 2

No Power Supply on Bank 2 / Single Power Supply (see above)
1 of 12 Volt / 350 Watt DC Power Supply [Add $23.99]
1 of 5 Volt / 350 Watt DC Power Supply [Add $23.99]
Setup and Troubleshooting Assistance

Regular Support (via E-Mail) - Included with controller purchase
Priority Support (via Phone) - With Controller Purchase [Add $49.99] | Purchased Separately [$99.99]
Click here for detailed information about support levels and response times (opens in new tab)
Controller Warranty Period

Pixel Controller - No Warranty / No Return [No Additional Cost]
AlphaPix 16 Controller - 1 Year Hardware Warranty (Ready2Run Assembled) [Add $15.99]
AlphaPix 16 Controller - 3 Year Hardware Warranty (Ready2Run Assembled) [Add $29.99] 
Click here for detailed information about our warranty policy (opens in new tab)
Click here for information on why we offer warranty options (opens in new tab)
  - Warranty period cannot be adjusted after purchase
  - Warranty applies only to controller, standard warranty applies to all other items in package
 - Controller hardware is identical for all warranty levels

Qty:  
[Product Description Page]
 
.
Product Features
This pre-assembled package includes everything but the lights using our sixteen output AlphaPix 16 controller. This package is useful for customers that want to use our EasyPlug3 lights and EasyPlug3 extension cables for a 100% solder free and plug and play solution. This fully assembled kit features:

  • A modern AlphaPix 16 - E1.31 Pixel controller able to handle the following:
    • 16 dedicated SPI pixel outputs
    • 3 dedicated RS485 outputs for legacy devices
    • 5,540 total pixels total / 340 per output + 1,536 channels on dedicated RS485 outputs
    • LCD Interface
    • Up to 5 amps of power per output (60w @ 12v / 25w @ 5v per output)
  • Large weather proof mounting enclosure and mounting plate
  • Power
    • 5v or 12v output (see options above)
    • One or two power supplies (see options above)
    • Input voltages from 90 to 240 volts AC (see options above)
      • US or Australia power input plugs (see options above)
  • Sixteen, 18 inch, pre-attached EasyPlug3 pigtails which work with all HolidayCoro EasyPlug3 extension cables and pixels
    • Each pigtail output is marked with a color coded label indicating voltage and output number
  • Fully wired, tested and ready for you to attach your EasyPlug3 pixel lights or your own pixel strings using our EasyPlug3 Male Pigtails (soldering required - see optional male pigtails above)
  • Fully compatible with LOR S3/S4/S5, xLights, LightShow Pro, Vixen, Nutcracker, HLS, Madrix and hundreds of other E1.31 and ArtNet sequencing and control applications. See our AlphaPix setup page for complete setup details

You might also be interested in...
Smart / Pixel RGB LED Node 8mm/12mm / 12v / 2811 / 50 Node String / 3" Spacing / Black / Waterproof EasyPlug3 Input and Output Cables Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 6in EasyPlug3 Input and Output Cables / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 / RGB Color Output Order
Our Price: $23.49

Add
Our Price: $21.99

Add
Smart / Pixel RGB LED Node 8mm/12mm / 12v / 2811 / 50 Node String / 3" Spacing / Black / Waterproof EasyPlug3 Input and Output Cables Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 6in EasyPlug3 Input and Output Cables / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 / RGB Color Output Order

Share your knowledge of this product. Be the first to write a review »