Home > DIY Cables / Mounting / Misc > RGB Power Supplies >

4 Output / 20 Amps / Power Distribution or Injection Board
PRODUCT PHOTO: 4 Output / 20 Amps / Power Distribution or Injection Board
Photo may show optional mounting board
or other accessories
 
Additional Photos:
Our Price: $12.99


Availability / Ships: Usually Ships in 24 Hours
Product Code: 951-63-KIT1
Qty:



The following items are included with this product:
[Product Description Page]
 
.
Product Features
  • Power Injection Fuse Board
    • For power injection projects. Please note that HolidayCoro does not recommend or design projects using power injection. Only experienced customers that fully understand power injection should use this product.
    • NOTE: Requires power supply at location of receiver, cannot be powered from expansion board
    • Kit includes:
    • Lights / Indicators
      • LED 01 to4 4 / RED - Fuse blown indicators, light up when fuse is not blown (turns off when fuse is blown for that output)
    • Standard Cable Guard TA-200 mounting hole pattern (3 screw terminals)
    • Power Output
      • 5 Amps Maximum (mini fused blade) per output
      • Wattage per output
        • 5 Volts: 25 Watts
        • 12 Volts: 60 Watts
      • Up to 10 AWG wire (we recommend a minimum of 18 AWG for power inputs - see our website)
      • Voltage Range: 5 to 24v DC
      • Power Input
        • 20 Amps
        • Voltage Range: 5 to 24v DC
        • Heavy duty screw down connections that support spade terminals
        • Positive and negative clearly marked on board
    • Warranty
      • 1 Year Warranty
      • Excludes:
      • Board damage due to improper mounting to a non-conductive surface
      • Environmental damage (water, snow, etc)
      • Physical damage
      • Blown fuses are not covered under warranty

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Not a flicker December 4, 2023
Reviewer: John Saunders from Houston, TX United States  
Great!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Distribution Board December 22, 2022
Reviewer: Kevin Wakefield from Katy, TX United States  
What a great product for power injection and at this price you can’t go wrong! Might have to order a few more to keep on shelf as my display grows year over year

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Small and compact December 5, 2022
Reviewer: David Belicki from San Bernardino, CA United States  
This board is small enough that it can be mounted in a small junction box, and used as a discreet power injection option for under eve or roof mounting.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Functionality December 2, 2022
Reviewer: Joel G. from vallejo, CA United States  
As described, i got what i needed for power injection and on my lights, specially for my long range receivers,,,,

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Fine Power Distribution Board September 12, 2022
Reviewer: Chuck from MA, United States  
Solid PD/PI board, but what is especially handy about it is that the screw holes line up with the holes in the long-range receiver board for stacking.

Was this review helpful to you?

View All Customer Reviews