Home > DIY Cables / Mounting / Misc > QuickTree Pixel MegaTree Mounting Systems >

QuickTree™ Seed Pixel MegaTree Topper Mounting System
PRODUCT PHOTO: Seed Pixel MegaTree Topper System For MegaTrees
Photos may show optional, separately purchased or customer sourced items
Product may differ slightly due to product improvements
  
Additional Photos:



Availability / Ships: Same Day, Sporadically up to 3 days (Delivery Time Information)
Product Code: 751

Seed Pixel MegaTree Kit Parts

QT5 - Seed Pixel Topper 180 Degrees @ 16 Strings / 360 Degrees @ 32 Strings [Add $22.99]
QT6 - Seed Pixel Topper 180 Degrees @ 24 Strings / 360 Degrees @ 48 Strings [Add $26.99]
QT7 - Seed Pixel Topper 180 Degrees @ 32 Strings / 360 Degrees @ 64 Strings [Add $29.99]
Seed Pixel Tension Clip Type 1 / BLACK [Add $0.59]
     - One required per vertical string
Seed Pixel Tension Clip Type 1 / WHITE [Add $0.59]
     - One required per vertical string
5 Way 1/2In Pipe Cross Fitting for Base & Pole Support [Add $8.95]
     - One required per tree

Qty:  
[Product Description Page]
 
.
Parts Overview of QuickTree Seed Pixel System
How to construct the MegaTree support structure
How to configure zig-zag strings in xlights
Product Features
This page contains all the information you need for building your Seed Pixel QuickTree
  • Need help with a unique design - just contact us and we'll be happy to help!
  • Specifications
    • Toppers
      • Black in Color
      • White inlay indicating string # on 48 and 64 string toppers
      • Dimensions
        • QT5: .5in x 4.0in Diameter
        • QT6: .4in x 6.5in Diameter
        • QT7: .5in x 7.0in Diameter
  • General Product Information
    • Designed for mounting seed pixel strings
      • Guaranteed to work with all HolidayCoro seed pixel strings
      • For non-HolidayCoro Seed Pixel strings:
        • Seed pixel size - must be .275 x .185 inches (green cirle)
        • Wire size - must be less than .25 wide and .06 inches thick. Do not trust your vendor's measurements for wire sizes, we recommend actually measuring the dimensions directly. (red slot)
    • Mounts with standard, inexpensive and commonly available hardware store parts
    • Easy to assemble and store in the off-season
    • Design allows for a variety of different star designs above the topper by stacking two floor flanges with the topper sandwiched between them
  • Strings per Degree of Coverage
    • The chart below shows coverage based on each model of topper:
      • Degrees of Coverage
      (out of 360 degrees)
      		Model
      QT5
      32
      Strings       		Model
      QT6
      48
      Strings       		Model
      QT7
      64
      Strings
      Diameter at top of tree > 4.0in 6.5in 7.0in
      Center to Center Spacing of Strings
      At Circumference of Topper       		> .4" .38" .38"
      160 (less than half) #
      S
      T
      R
      I
      N
      G
      S
      		 14 21 28
      180 (half) 16 24 32
      200 (more than half) 18 27 36
      270 (three-quarters) 24 36 48
      360 (full tree) 32 48 64
  • Assembly Instructions
    • See videos on this page
    • Determine the correct height tree for your project (e.g. 8ft, 10ft, etc)
      • Note that we don't recommend unsupported seed pixels for MegaTrees over 15ft tall
    • Determine spacing of your pixels (e.g. 1.0, 2.0, 4.0 inch spacing. Typical spacing is 2.0 inch.)
    • Determine number of degrees of output
      • This is determined by standing in the possible viewing locations and determining how much of the tree can be seen at any one time. The vast majority of residential installations are 180 degrees.
    • Determine if you want a star on top of the tree
  • Included, optional and customer supplied items
  • Product Specifications
    • Product Revision history
      • April 2025 - Initial Design
    • Custom Designs
      • Any combination, spacing diameter, mounting system or other customization
    • County of Origin:
      • Design: USA (Texas)
      • Manufacturing: USA (Texas)
      • Materials: Global Materials
    • Estimated assembly time:
      • 30 to 120 minutes

You might also be interested in...
Seed / Pebble Pixel Strings with xConnect Plugs Bulk Roll Seed / Pebble Pixels
Price Varies by Spacing and Pixel Count

Add
Price Varies by Spacing and Pixel Count

Add
PRODUCT PHOTO: Seed Pebble Pixels PRODUCT PHOTO: SBulk Roll Seed Pebble Pixels

Share your knowledge of this product. Be the first to write a review »