Home > DIY Cables / Mounting / Misc > Arch Accessories >

PixNode QuickArch Kit / 1 to 3 Rings / 76.4 in - 194 cm Wide / 38.2 in - 97 cm Tall / 50 100 or 150 Pixel Nodes
PRODUCT PHOTO: PixNode QuickArch Kit / 1 to 3 Rings / 76.4 in - 194 cm Wide / 38.2 in - 97 cm Tall / 50 100 or 150 Pixel Nodes
Photos may show optional items including lights. Assembly required. Available in black and white.


 
Additional Photos:





Availability / Ships: Usually Ships in 24 Hours
Product Code: 1083

Select Material Color

Black [Add $8.99]
White [Add $8.99]
Select Zip Ties

None - I'll supply my own zip ties
QTY 20 of Black 8 Inch Zip Ties (For use with black Arch material, sufficient for 1 Arch) [Add $0.99]
QTY 20 of White 8 Inch Zip Ties (For use with white Arch material, sufficient for 1 Arch) [Add $0.99]

Qty:  
[Product Description Page]
 
.
How to Assemble
Easy Assembly and Dis-Assembly
Setup Model in xLights
Single Row / 50 Pixels
Product Features
  • General Product Information
    • Intended locations for use:
      • Ground Locations
      • Along driveways
      • Along Sidewalks
      • To create pedestrian barriers to parks, yards and other areas
    • Holiday Seasons:
      • All - including year round
    • Quick installation with just a few zip ties and nodes
    • Super easy installation and storage - just pull off rebar mounting and store flat
    • Very economical - with minimal hardware requirements
    • Tolerant of imperfect constructed arches - no worries about exactly precise arch construction as the QuickArch system will allow adjustments to height and width
    • Adjustable pixel counts
      • Spacing:
        • Top Row - 50 Pixel Nodes @ 2.25 inches / 57mm
        • Middle Row - 50 Pixel Nodes @ 2.1 inches / 53mm
        • Bottom Row - 50 Pixel Nodes @ 2.0 inches / 51mm
      • Use regular scissors to cut to preferred number of rows - 1, 2 or 3 rows
    • Produced from weather resistant and strong plastic
    • Available in black or white
  • Included, optional and customer supplied items
    • Required items:
    • Customer supplies items (per arch):
      • One 10ft Length of 3/4" PVC Pipe (plumbing or electrical section of your hardware store)
        • Grey (UV resistant)
        • White (Partially UV resistant)
      • Two 2 to 4ft Lengths of 1/2" Rebar (concrete section, usually available pre-cut)
        • Assumes soft ground, other hard surfaces may require other mounting method
    • Customer supplied tools:
      • Hammer for rebar installation
      • Nippers / Cutters for zip ties
      • Scissors (If modifying from 150 Pixel Count / 3 Row to 100 Pixel Count / 2 Row or 1 Row 50 Pixel Count)
  • Assembly Instructions and Recommended Reading/Watching
    • Instructions
      • Video:See this product page
      • Written: None
  • Estimated assembly time: 5 to 20 minutes
  • Technical Specifications
    • Color: Black or White
    • Material thickness: .038 inches
    • Overall dimensions: 76.4 in x 38.2 in (fully assembled)
    • Temperature Range: -17f to +160f
    • Material Composition: HDPE
    • County of Origin
      • Materials/parts: USA (Texas)
      • Assembly/Mfg: USA (Texas)
      • Design: USA (Texas)
  • History
    • Released 18-Aug-2019

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 25 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Quick and easy October 17, 2023
Reviewer: Jack Malone from Martinez, GA United States  
Set up rather quick with zero problems. Shipping was super fast also.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 December 18, 2022
Reviewer: Justin Ainsworth from Bluffdale, UT United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Very customizable! December 10, 2022
Reviewer: Big Mike from NH United States  
I only wanted 25 nodes per arch to make them shorter. Any taller and they would block other props in my display and that's the beauty of these arches! With a little ingenuity and time I modified 2 of these to work with my display!  

Mounting these I just used some extra rods I had from the mini tree stars I also ordered, bent them in the shape of the arch and used white duct tape to match the arch and BOOM!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Arches December 5, 2022
Reviewer: Haris Dizdarevic from Tucson, AZ United States  
Very good item and set up was cake with all the provided instructions on HC website. First year doing 15’ tree megastar and arches. Was able to get it up and running just by simply watching the videos over and over again. Shipping was super quick and items were packed properly with zero damage on arrival. Its my only atop for all light show needs.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product October 8, 2022
Reviewer: Titan Hunter from sylacauga, AL United States  
Works great, recently changed from strip light arches to pixels, exactly what I needed. Great company and affordable.

Was this review helpful to you?

View All Customer Reviews