Home > By Location / Season > By Location - Wall & Fence Based >

PixNode CoroFlake™ for 12mm Bullet Style Pixel and Dumb Nodes
PixNode CoroFlakeâ„¢ for 12mm Bullet Style Pixel and Dumb Nodes
Product may differ slightly from photos due to ongoing design improvements
Lights sold separately


 
Additional Photos:


Price: $7.99 to $10.99 (Varies by Size)


Availability / Ships: Same Day / Intermittently up to 3 days / Delivery Times
Product Code: 130

Select PixNode CoroFlake Size and Node Count

15" Diameter CoroFlake for 70 / 71 Nodes [Add $7.99]
24" Diameter CoroFlake for 100 Nodes [Add $10.99]

Qty:  
[Product Description Page]
 
.
15" CoroFlake
23" CoroFake
Product Features
  • Features
    • Uses standard "12mm" bullet type pixel nodes or dumb nodes (square/flat nodes can be used but are not the preferred node format for this item)
    • Made from white, strong 10mm (.387") thick coro
    • Two sizes
  • Unit Specifications:
    • 15" CoroFlake
      • 15.2" x 15.2"
      • Five "arms" each with 14 Pixel Node holes
      • 70 Total Pixels in "arms", one center pixel (optional)
    • 23" CoroFlake
      • 23" x 22.7"
      • Five "arms" each with 20 Pixel Node holes
      • 100 Total Pixels
      • Outside support ring included for free-standing and high wind-load locations - can be easily cut out if not needed
      • xLights Model download
      • Mounting
        • One in each section of support ring (.4" diameter)
        • Two at top of center (.4" diameter)
  • Assembly time
    • Typically 5-20 minutes per CoroFlake (varies by skill, soldering, connections, etc)
  • Product origin
    • Material: USA (Texas)
    • Design: USA (Texas)
    • Manufacturing: USA (Texas)
  • Additional items required to complete
    • Pixel or dumb RGB 12mm nodes
    • Pixel or RGB dumb controller
    • Extension cables
    • Shrink wrap for light assembly
    • Zip Ties, rope, wire or other suitable mounting product per customer requirements




You might also be interested in...
Bullet Pixel Node Installation Pixel Pusher Pliers
Our Price: $14.99

Add
Bullet Pixel Node Installation Pixel Pusher Pliers

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 27 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Newest addition to my display September 1, 2021
Reviewer: Don Essick from Waxhaw, NC United States  
Very nice looking snowflakes and the Coro is super nice. Took a while to find the wiring diagram but customer service emailed it to me immediately after I asked.  Note that unless you want to do a lot of soldering work you need to use pixels with 4 inch spacing.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 CoroFlake August 4, 2021
Reviewer: Don Paige from Broken Arrow, OK United States  
Great product. This was a very nice addition to my display.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Great Product! April 7, 2021
Reviewer: Connor Meslin from Tarpon Springs, FL United States  
The material was great and the pixels were easy to push in and it looks great. The only compliant I have is that it was difficult to figure out the wiring plan from xlights and it would be great if they could possibly add hole numbers.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Nice Snowflakes January 6, 2021
Reviewer: Randy L Longino from Barnard, KS United States  
Very well made, easy to push pixels in. Plan to get more later.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Nice flakes December 26, 2019
Reviewer: Stanley Bogumil from Lancaster, CA United States  
These snowflakes look nice. There is no possible way to arrange the nodes to avoid cutting wires and soldering. But it’s minimal.

Was this review helpful to you?

View All Customer Reviews