Home > DIY Products (Parts+Pieces) > Waterproof Enclosures / Mounting Adapters & Kits (HC-2500 Style) >

AlphaPix Classic 4 / 16 V3 to HC-2500 Mounting Plate Adapter Kit (Door or Base)
AlphaPix Classic 4 / 16 V3 to HC-2500 Mounting Plate Adapter Kit (Door or Base)
Controller and Enclosure Sold Separately
End-Closure Mounting Plate and Hardware Included
Photos may show optional items


 
Additional Photos:


Our Price: $13.59


Availability / Ships: Same Day / Delivery Times
Product Code: 548-KIT1


The following items are included with this product:

To Provide Input Power to Power Supply

None - I'll be supplying my own power cord
1 of 120v AC Input Cord 5Ft - USA, CA, MX [Add $2.99]
1 of 240v AC Input Cord 5Ft - Australia, NZ, AR [Add $3.99]
Bulkhead Cable Gland Strain Relief

Cable Gland and Strain Relief for Power or CAT5 Cables [Add $0.49]
To Pass CAT5 Data Cable Through Base Of Controller

No CAT5 Bulkhead Connector
1 of 6.7 in / 170mm Bulkhead CAT5 Extension [Add $4.49]
350w Power Supply

None - I'll be supplying my own power supply
1 of 12v - 350w Power Supply [Add $23.95]
1 of 12v - 350w Power Supply (Meanwell Brand) [Add $32.95]
1 of 5v - 350w Power Supply [Add $23.95]
2 of 12v - 350w Power Supply [Add $47.89]
2 of 12v - 350w Power Supply (Meanwell Brand) [Add $65.89]
2 of 5v - 350w Power Supply [Add $47.89]
14 AWG Hook-up Wire (Power Supply to Controller)

2 Feet of Heavy Duty 14 AWG Power Wire [Add $1.99]
Pigtail Cable Labels

Outputs 1 to 16 / 12 Volt / Smart Pixel / White Shrink Wrap [Add $2.48]
Outputs 17 to 32 / 12 Volt / Smart Pixel / White Shrink Wrap [Add $2.48]
Outputs 1 to 16 / 5 Volt / Smart Pixel / Yellow Shrink Wrap [Add $2.48]
Outputs 17 to 32 / 5 Volt / Smart Pixel / Yellow Shrink Wrap [Add $2.48]
No Pigtail Labels

Qty:  
[Product Description Page]
 
.
Hands on with product
Product Features
  • This adapter is designed to mount the following combinations of hardware into a CG-1500 enclosure:
  • This kit includes all mounting screws (one or two power supplies), controller mounting plate and end-plate for the CG-2500
  • End-closure plate includes pre-cut holes for two 1 inch clamps, one cable gland and 1 CAT5 bulkhead mounting adapter
  • Kit does not include the AlphaPix 16 Controller, power supply, wiring or enclosure - all are optional
  • Looking for a pre-assembled controller? We have your covered: http://www.holidaycoro.com/16-Output-E1-31-Artnet-Pixel-Controller-Assembled-p/845.htm
  • Installation Notes:
    • Power Supplies
      • One power supply - mounts flat / horizontal. Allows another power supply to be mounted on door
      • Two power supplies - mount vertical. Includes stabilizer bar (cut out from under controller)
    • Hole Guide (marked on board)
      • X = Screws to mount adapter plate to HC-2500 enclosure
      • | = AlphaPix 4 mounting screw holes
      • - = AlphaPix 16 mounting screw holes
      • / = Vertical mounting of power supplies (two)
      • \ = Horizontal mounting of power supply
      • O = Dual power supplies stabilizer bar (cut tabs to release from under controller)
      • > = Zip tie mounting location
    • Recommendations
      • Run power input cable through hole in mounting board and under mounting board and come out through notch at bottom of board. Use zip ties to secure low power cables on top of board and high power cable on bottom of board.
      • There are notches at the top of the mounting board to fully access the screw holes for the enclosure even with two power supplies installed.
      • The two long vertical holes are for proper ventilation of power supplies when installed vertically

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 December 11, 2018
Reviewer: Daniel from Waipahu, HI United States  


Was this review helpful to you?