7.5 Amp Fuse for AlphaPix 4 Classic

Home >

Our Price: $0.29

Availability / Ships: Usually Ships in 24 Hours
Product Code: 873

Qty:

[Product Description Page]

Product Features
Process for replacement of fuses on different boards:

AlphaPix Classic 16 V1 - V3
- Locate bad fuse by process of troubleshooting (see video below)
- Pull fuse either with your fingers or needle nose pliers
Flex SPI Expansion Board
- 1 SPI Board or 2 SPI Boards (top board)
  - Locate bad fuse by looking for location WITHOUT red LED lit, this indicates a bad fuse when the light is OFF
  - 30mm spacing: Use needle nose pliers to remove and replace fuse
  - 40mm spacing: Use your fingers or needle nose pliers to remove and replace fuse
- 2 or 3 SPI Boards (bottom board)
  - Turn off power to unit
  - Unplug ribbon cables from top of CPU board
  - Unplug CAT5 network cables, fan wiring and/or audio jack cable from CPU board
  - Remove four 5.5mm or 7/32" nuts from top of CPU board
  - Remove CPU board
  - Unscrew four screws on right power input to allow SPI output board to be pulled away
  - Move SPI board out of the way to access the SPI board underneath top SPI board
    - Note: It is not necessary to disconnect pixel output cables
  - Replace fuse using your fingers or needle nose pliers
  - Reinstall board in reverse order

Share your knowledge of this product. Be the first to write a review »