Home >

DISCONTINUED: 25 Ft / 7.6 Meter Coverage RGB 10w Flood Coverage Kit with Controlller, Lights and Cables Ready2Run with 4 Floods
PRODUCT PHOTO:  25 Ft / 7.6 Meter Coverage RGB 10w Flood Coverage Kit with Controlller, Lights and Cables Ready2Run with 4 Floods
Photo shows 27 channel, ships with 30 channel controller


 
Additional Photos:


Our Price: $329.95



Availability / Ships: Usually Ships in 24 Hours
Product Code: 838


The following items are included with this product:

DMX Data Generation Source To Be Used

I Already Have an Actidongle or Other RS384 Based, E1.11 / DMX 1990 Data Source
1 of ActiDongle - DMX Dongle (Enttec Pro Compatible) [Add $65.49]
Using AlphaPix or EasyLights RS485 Interface  << Click this link for setup information using AlphaPix / EasyLights controllers
NOTE: This dumb controller will not connect directly to the Ethernet (CAT5) jack on a PC or network switch
When using with LOR S3/S4/S5, requires Actidongle (see above) and LOR Advanced edition Software
Pre-Configured Input Voltage & Plug Type

110 / 120v @ 60Hz Input / Type B Plug (United States, Canada, Mexico, Others)
220 / 240v @ 50Hz Input / Type I Plug (Australia, NZ, China)
220 / 240v @ 50Hz Input / Type F Plug (Most of Europe and Russia)
220 / 240v @ 50Hz Input / Type G Plug (United Kingdom / Ireland / Singapore)
220 / 240v @ 50Hz Input / Type B Plug (United States, Canada, Mexico, Others)
    Click here for voltage and plug details
Controller Warranty Period

30 Channel Dumb Controller - 30 Day Factory Defects Only [No Additional Cost]
30 Channel Dumb Controller - 1 Year Hardware Warranty (Ready2Run Assembled) [Add $8.99]
30 Channel Dumb Controller - 3 Year Hardware Warranty (Ready2Run Assembled) [Add $19.99] 
Click here for detailed information about our warranty policy (opens in new tab)
Click here for information on why we offer warranty options (opens in new tab)
  - Warranty period cannot be adjusted after purchase
  - Ready2Run Packages: Extended warranty applies only to controller, standard warranty applies to all other items in package (Pixels, Mounting Hardware, Etc)
 - Controller hardware is identical for all warranty levels
CAT5 Ethernet and Long Range Data Signal Cable

No Data Cable - I'll Provide My Own
10 Foot / 3 Meters Green CAT5 Data Cable for Data Signal [Add $3.49]
25 Foot / 7.6 Meter Green CAT5 Data Cable for Data Signal [Add $5.49]
50 Foot / 15 Meter Green CAT5 Data Cable for Data Signal [Add $8.99]
100 Foot / 30 Meter Green CAT5 Data Cable for Data Signal [Add $18.99]
200 Foot / 60 Meter Green CAT5 Data Cable for Data Signal [Add $42.99]
Click Here For Complete CAT5 List and Accessories

Qty:  
[Product Description Page]
 
.
Product Features
This RGB Flood Light package has everything you need for an RGB flood light system on a typical 50ft / 15.2 Meter house. The only additional items required are a source of E1.11/RS485 based DMX - see options above.

To run this controller from the E1.11 DMX output of the AlphaPix, see this article.

You might also be interested in...
CLEARANCE: ActiDongle (tm) - Active DMX Dongle (Enttec Pro Compatible) - V2
Our Price: $65.49
Excluding Optional Support

Add
PRODUCT PHOTO: ActiDongle (tm) - Active DMX Dongle (Enttec Pro Compatible) - V2

Average Rating: Average Rating: 3 of 5 3 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
3 of 5 25 Ft / 7.6 Meter Coverage RGB 10w Flood Coverage October 21, 2017
Reviewer: Matthew Jones from Denver, CO United States  
Everything came prewired ready to run. Set up is clean/ very organized with sufficient cable length for all connections. Waterproof case is good quality. Only complaint is the   RJ45/DMX connection. 3 pin DMX connections are completely unusable. Not a huge issue, I don't currently use them and that fact is clearly stated in the description. However RJ45 connections are an issue. Due to location/orientation in the case, it's VERY difficult to plug  CAT5  into them. Second it's next to impossible to DISCONNECT the cable once plugged in. Not a big deal if you leave CAT5  plugged into the controllers for storage, I do not! My runs from controller to controller are long. More importantly if you have a bad/damaged cable it MUST be removed/replaced. Which is a VERY DIFFICULT proposition! I had to remove the mounting board from the case to disconnect the short CAT5 used for testing. I must buy an adapter to use this controller. Due to these issues I would have to rate this overall at 3.5 stars
--- HOLIDAYCORO RESPONSE ---
We could not agree more that the plugs for the CAT5 RS485 input are hard to reach, we have updated the 27 channel controller to a completely new designed 30 channel controller which has a vertically located jack that resolves this problem completely.   We have updated this product from 27 to 30 channel controller for any future purchases.

Was this review helpful to you?