Knowledge Base:  

Knowledge Base : actidongle
Page of 1
ActiDongle USB Serial Port Drivers (Item #53)
To install your ActiDongle, you will need to install the driver. You can find drivers for all operating systems on this website: www.ftdichip.com/Drivers/D2XX.htm Notes: The require
Setting up the ActiDongle for use with xLights
The following video shows how to download, install and configure xLights 2012b for use with the HolidayCoro ActiDongle :    
Technical Support Assistance Options for The Actidongle
HolidayCoro offers a range of technical support assistance options for customers to fit their exact needs. The following applies to all support options: Support is per controller not per inciden
Running Legacy RS485 Light-o-Rama Controllers and RS485 Based DMX (E1.11) and Ethernet Based (E1.31) DMX Controllers Together
If you have an existing LOR network or controllers and would like to integrate modern, standards based controllers into that network, this page shows a variety of different options available to you. N
Software Applications Supported by HolidayCoro Lighting Controllers
HolidayCoro sells a wide variety of hardware that allow you to build most any project but what we don't sell is software - and for a good reason. We believe there are many good applications on the mar
DMX Wiring Cross Reference
HolidayCoro devices that use CAT5 wire for DMX signals (excluding E1.31 devices) are intended to be wired using pins 1 and 2 of CAT5 wiring (568B) for their RS485 DMX input signal. If you are usin
Data Input Interfaces Used on Common Lighting Controllers
There are a number of different standards for controller interfaces. This document details the differences between these interfaces: Interface Name Protocol Wiring Typ