Home > DIY Cables / Mounting / Misc > Waterproof Enclosures / Mounting Adapters & Kits (CG-1500 Style) >

350w PS + SanDevices E682 / E6804 to CableGuard CG-1500 Mounting Plate Adapter+Hardware (Base Mount)
350w PS + SanDevices E682  / E6804 to CableGuard CG-1500 Mounting Plate Adapter+Hardware (Base Mount)
Case & Power Supply Sold Separately
HolidayCoro does not sell the E682
Product shown is V2, now shipping V3


 
Additional Photos:


Price Without Optional Items: $10.99


Availability / Ships: Same Day / Delivery Times
Product Code: 634-KIT1


The following items are included with this product:

CG-1500 Mounting Enclosure

Waterproof Enclosure (CG-1500) [Add $13.99]
1" I.D. Cable Passage and Cable Strain Relief

None - I have my own solution for cable reinforcement
2 of 1" Cord Grip Clamps for CG-1500 Enclosure (No Pre-Drilled Holes, I'll Drill them myself) [Add $2.98]
PRE-DRILLED: 1 of 1" Cord Grip Clamp for CG-1500 Enclosure + One Pre-Drilled Hole on Left Side [Add $1.98]
   - Requires purchase of CG-1500 Enclosure for Holes to be Drilled Into
PRE-DRILLED: 1 of 1" Cord Grip Clamp for CG-1500 Enclosure + One Pre-Drilled Hole on Right Side [Add $1.98]
   - Requires purchase of CG-1500 Enclosure for Holes to be Drilled Into
PRE-DRILLED: 2 of 1" Cord Grip Clamps for CG-1500 enclosure + Two Pre-Drill Holes Left & Right Sides [Add $3.97]
   - Requires purchase of CG-1500 Enclosure for Holes to be Drilled Into
To Provide Input Power to Power Supply

None - I'll be supplying my own power cord
1 of 120v AC Input Cord 5Ft - USA, CA, MX [Add $2.99]
1 of 240v AC Input Cord 5Ft - Australia, NZ, AR [Add $3.99]
350w Power Supply

None - I'll be supplying my own power supply
1 of 12v - 350w Power Supply [Add $23.95]
1 of 12v - 350w Power Supply (Meanwell Brand) [Add $29.49]
1 of 5v - 350w Power Supply [Add $23.95]
14 AWG Hook-up Wire (Power Supply to Controller)

2 Feet of Heavy Duty 14 AWG Power Wire [Add $1.99]
Pigtail Cable Labels

Outputs 1 to 16 / 12 Volt / Smart Pixel / White Shrink Wrap [Add $2.48]
Outputs 17 to 32 / 12 Volt / Smart Pixel / White Shrink Wrap [Add $2.48]
Outputs 1 to 16 / 5 Volt / Smart Pixel / Yellow Shrink Wrap [Add $2.48]
Outputs 17 to 32 / 5 Volt / Smart Pixel / Yellow Shrink Wrap [Add $2.48]
No Pigtail Labels

Qty:  
[Product Description Page]
 
If you have not already purchased the SanDevices controller, you may wish to consider the Flex controller system - it has a built in network switch, OLED screen, 2 times more outputs and greater flexibility. Available in bare board and every possible Ready2Run configuration.

Overview of SanDevices Mounting Kit
Product Features
The product code includes the mounting adapter plate and required mounting hardware for mounting the following items: into a CG-1500 enclosure:

  • One San Devices E682 Pixel Controller
  • One 350 Watt Power Supply (5v or 12v)

NOTE: HolidayCoro does not sell the SanDevices E682 controller.

You might also be interested in...
AlphaPix Classic 16 V3 - E1.31 & ArtNet to SPI Pixel Controller w/LCD Display - 16 SPI + 3 RS485 Outputs
Starting At: $174.95

Add
AlphaPix Classic 16 V3 - E1.31 & ArtNet to SPI Pixel Controller w/LCD Display - 16 SPI + 3 RS485 Outputs

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 33 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 DIY Controllers December 10, 2019
Reviewer: Craig Warne from Owasso, OK United States  
Your service is always excellent.  You are very conservative on your shipping times.  I have always received my items before expected.  
The quality is very good on your Enclosure hardware products.  And I have found that you beat prices from anyone else (even Am**on).

Oh! and your instructional videos are very informative(and entertaining....).

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 No More Stickers July 28, 2019
Reviewer: Jason Goetz from Denver, CO United States  
Only thing I do not like are the stickers. Especially the new Holiday Coro Black ones.  Extra step to remove every one of them from the case.  The " look theres more sticker".  Kinda a problem too.  I can totally tell there is more stuff in there.  Plus, I have to open it to use it.  So after I open it "oh look there is more!"  Appreciate the hint.  But, um....

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Love the adapter plate February 27, 2019
Reviewer: Thomas Pursell from Paola, KS United States  
I love the adapter plate. It makes it to mount the power supply and pixel controller. The hardware for the pixel controller could be made so that the board sits higher so wires can be ran under it. I find that 6-32 x 1/2 stand offs work well and screw in easy without having to pretap.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 AGAIN, GREAT PRODUCT AND CUSTOMER SERVICE October 28, 2018
Reviewer: Brent Lamarque from Hertford, NC United States  
Upgraded my CG-1500 with the mounting plate for my E682 controller.  Installation couldn't be easier.  There are people that are unhappy with HolidayCoro for a variety of reasons but I've had nothing but great products and great customer service.  I've been a returning customer for years.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 May 10, 2018
Reviewer: Michael Kelland from Yarramalong, NSW Australia  


Was this review helpful to you?

View All Customer Reviews