Home > DIY Products > House Outline and Misc Pixel Mounting Hardware >

Clear Lexan 1/2" Pipe Mounting Clip / Mounts RGB Strips and Modules to Fascia, Soffit, Roofs and Walls (Single Clip)
Clear Lexan 1/2" Pipe Mounting Clip / Mounts RGB Strips and Modules to Fascia, Soffit, Roofs and Walls (Single Clip)
PVC Pipe, Lights, Zip Ties Not Included
1.5" Screw is Optional


 
Additional Photos:


$.69 for 5 to 49 / $.62 for 50 to 99 / $.59 for 100+
5 to 49 Count Price: $0.69

(Minimum order):  5

Availability/Ships: Same Day / Delivery Times
Product Code: 770

To Attach Clip to Most Surfaces (optional)

I'll provide my own screw(s) for the clips
1 of Self Tapping 1.5" Screw (for Clip Attachment to Most Wood Sub-straits) [Add $0.05]

Qty:  

  
[Product Description Page] [FAQ & Documentation Page]
 
This clip was designed to allow you to mount 1/2" PVC pipe to a structure (roofs, fascias, window surrounds, stucco). Then, RGB strip, modules or bulbs are mounted to the 1/2" PVC pipe and the entire assembly just "pops" into the clips mounted to the substrate. We recommend in normal mounting situations (regular wind loads, not mounted upside down) one mount every 3 feet with one mount 1 to 2 inches from the start and ends of the PVC pipe.
Why Not To Use PVC Clips
Pixel Strip Mounted With Clips
Product Features
Advantages:
  • Designed for 3+ years of outdoor use. Standard PVC clips (which we no longer sell) only typically last a single season as they are not UV resistant and will break when installing pipes.
  • Allows you to build your entire lighting structure safely at the ground
  • Reduces the amount of time required on the roof or ladder to perfectly mount your lights
  • Lights can be perfectly spaced and angled, on the ground, without depending on shingle or gutter clips that might not even work with pixel lighting
  • Securely holds PVC pipe to prevent rotation of pipe, ensuring that lights face the exact direction you want them pointing - towards your audience
  • Uses cheap and light PVC pipe
  • Clips are clear but can be painted with Krylon Fusion for Plastics paint prior to installation to match roof shingles, fascia or other mounting substrates for year-round mounting
  • While this product is not intended for use with 1/2" EMT conduit (we recommend using schedule 80 PVC instead where strength is an issue), which is .706" OD compared to 1/2" PVC which is .840" OD - the clip can be used with 1/2" EMT. Here are the holding strengths (at 78 degrees f with sufficient screw):
    • 1/2" PVC Pipe - 18 pounds per clip
      • Compatible:
        • ASTM D-2241 / SDR 13.5 / Thinwall
        • ASTM D-1785
      • Non-Compatible:
        • SDR 11 (CPVC)
    • 1/2" EMT Conduit - 9.5 pounds per clip
Warnings:
  • The optional 1-1/2" screw may not be suitable for all mounting locations such as roofs. Ensure that the selected screw is long enough to fully embed into the mounting material to ensure a secure attachment.
  • Do not depend upon or hold onto PVC mounted pipe to support yourself.
Additional details:
  • Overall height from bottom of base to top of PVC pipe: 1.14"
  • Base width: .87"
  • Maximum screw head width: .35"
  • Width of gap at top when 1/2" PVC mounted: .71"
  • Mounting Surface to Base of Pipe Gap: .30"
  • Color: Clear (87% light transmission)
  • Material: Polycarbonate (Lexan) with UV inhibitors
Additional items required/optional:
  • 1/2" (nominal) / .840 OD Actual (thin wall recommended) PVC pipe
  • Minimum 4" zip ties, 6" recommended (Nylon UV resistant recommended)
  • Longer screws may be required depending on your specific substrate

You might also be interested in...
Zip Tie - 8" White (Single) Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 6in EasyPlug3 Input and Output Cables / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 / RGB Color Output Order
Our Price: $0.07

Add
Our Price: $21.99

Add
Zip Tie - 8" White (Single) Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 6in EasyPlug3 Input and Output Cables / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 / RGB Color Output Order

Average Rating: 4.5 of 5 Total Reviews: 39 Write a review »

  0 of 0 people found the following review helpful:
 
Mounting Clips for PVC August 18, 2018
Reviewer: Bill from Port St Lucie, FL United States  
Great product. Easy to install and solidly holds my PVC/pixel nodes in place.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
A God send. August 12, 2018
Reviewer: Ryan M from Lynnwood, WA United States  
I spent a whole day at various home improvement stores trying to find something that would make hanging my props easy and painless to do. I read all sorts of forums and various ways to drill hooks and make rigs. All of it seemwdike a lot of work that I just didn't have the time or patience for.

Enter Holiday Coro. Order the clips, got themin less than a week, and hand my first prop mounted in just 20 minutes. So simple and so easy.



Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Clear lexan mounting clipsr August 5, 2018
Reviewer: Robert Strickland from Martinez, CA United States  
Used with 1/2” pvc for mounting around doors, windows, and yard perimeter .  Hold pvc tightly. Don’t over tighten mounting screw. Ordered more.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great and long lasting June 28, 2018
Reviewer: Fishbulb from Bethesda, MD United States  
These have held up very well for us over the last year and a half. We leave the lights up year round and have had no problems.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Lightweight, strong. May 16, 2018
Reviewer: shane rehm from Temecula, CA United States  
They mount easily and hold 1/2" PVC, grey or clear, securely. Only time will tell how they hold up to the weather. They are noticeable from street, but only if you are looking for them.

Was this review helpful to you?

View All Customer Reviews