Home > DIY Products > RGB Power Supplies >

Power Supply - Waterproof / 120v Input / 12v Output / 3.75 amps / 45 Watts with Power Input Cord

Our Price: $13.95

Availability/Ships: Same Day / Delivery Times
Product Code: 65

[Product Description Page] [FAQ & Documentation Page]
How to build a Power-Over-CAT5
Power Injector
Product Features
  • General Product Information
    • Used for reducing 100 to 130 volts to 12.5 volts DC
    • Output of 3.75 Amps of power at 12 volts DC / 45 watts
    • Short circuit protection
    • Waterproof to IP67 (power supply body only, plugs should still be waterproofed)
  • Items included with this item:
    • Power Supply with bare leads for output and 3 prong grounded plug for input
  • Recommended items for this product
    • Shrink wrap tubing for protecting wiring connections (output).
    • Note we do NOT recommend using electrical tape or wire nuts for wiring connections - this is unsafe.
  • Optional Items
    • Mounting (screws, two sided tape, hot glue or other)
  • Required items for operation:
    • Shrink wrap tubing (for sealing soldered connections). We do not recommend wire nuts or electrical tape be used for connections.
    • Solder for attaching RGB lights or controllers
  • Customer supplied tools or items:
  • Instructions
    • See product page for wiring and product setup videos.
    • For DMX + Power over CAT5 wiring, see our video or documentation
    • For information on how many LEDs you can run from this power supply, see our Knowledge Base
  • Estimated assembly time:
    • First unit: 5-10 minutes
  • Technical Specifications
    • Color: Silver / Mill Spec Aluminum
    • Weight: .80 pounds or 13 Oz
    • Dimensions
      • Height: 1.0"
      • Width (main case, excluding mounting tabs): 9.1" or 9 1/8"
      • Width (main case including tabs): 9.72" or 9 3/4"
      • Height: .8"
      • Depth: 1.15"
    • Temperature Range
      • Operation: 10 to 120 degrees Fahrenheit
      • Storage: -20 to 140 degrees Fahrenheit
    • Material Composition
      • Case: Aluminum and plastic (end caps)
      • Wires: PVC coated - copper
  • County of Origin
    • Materials/parts: China / USA / Japan
    • Assembly: China
    • Design: China
  • Certifications & Approvals
    • Underwriters Laboratories (UL) Certified/Recognized/Approved: No
    • CE: No
    • ROHS (Lead Free): Not Listed
  • Wiring / Interface:
  • Power Input (100-130 volts AC)
    • Neutral - Large blade of plug
    • Hot - Small blade of plug
    • Ground - Round pin
  • Power Output (12.5 volts DC)
    • Red or Brown (varies by model): Positive 12v
    • Black or Blue (varies by model): Negative 12v
    • Stripped and tinned wires ~7" Long
  • Warranty & Support
    • 60 days from date of purchase OR until December 31st of the year in which the product was purchased. For complete information, see our warranty details.
    • See our support policy for details on what levels of technical assistance you can expect from HolidayCoro.
  • Customization: Yes - Minimum order of 200

You might also be interested in...
Dumb Rectangle RGB LED Waterproof Module - 12v Dumb RGB 27 Channel DMX Controller / Decoder / Screw Terminals / DIP Switch Addressing / CAT5 & XLR DMX Input Plugs / 25 Amps Dumb Square RGB LED Waterproof Module - 12v
Our Price: $0.79

Single Controller Price: $37.99

Our Price: $0.47

RGB Rectangle Module 12v DC 27 Channel DMX Controller for RGB Lights - 25 Amps 12v RGB Square Module

Average Rating: 5 of 5 Total Reviews: 42 Write a review »

  0 of 0 people found the following review helpful:
Couldn't find a better deal November 29, 2017
Reviewer: Damon Kelling from Scottsdale, AZ United States  
Looked all over and this was still the best deal and got delivered quickly. Already had power cord attached and I quickly attached a pigtail to make it ready for use.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
It powers things.... July 30, 2017
Reviewer: David West from Brentwood, CA United States  
Worked flawlessly. Power in and power out not much else to say about it. It's small enough to hide in many locations but the length can get you in a bind if you have a small set piece or prop to put it in.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Works fine June 7, 2017
Reviewer: Michael Taylor from Albuquerque, NM United States  
It is a lot bigger and heavier than expected, but it gets the job done.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
power supply Waterproof / 120v Input / 12v Output March 30, 2017
Reviewer: Mark Anderhalt from Cochranton, PA United States  
45 watt power supply is excellent,, right size, performs well

Was this review helpful to you?

  0 of 0 people found the following review helpful:
45 watt 12 vcd power supply December 11, 2016
Reviewer: Mike Bagwell from Springfield, MO United States  
This is a very nice small form factor power supply to power controllers that do not need much power.

Was this review helpful to you?

View All Customer Reviews