Home >

EasyPlug3 / 3 Conductor / 5ft Total (2.5 + 2.5) / Screw Together / Pre-Stripped Pigtail / Waterproof Male + Female (18 AWG) / RGB Smart Pixels
EasyPlug3 / 3 Conductor / 5ft Total (2.5 + 2.5) / Screw Together / Pre-Stripped Pigtail / Waterproof Male + Female (18 AWG) / RGB Smart Pixels


 
Additional Photos:


Our Price: $2.99


Availability / Ships: Same Day / Delivery Times
Product Code: 723


The following items are included with this product:

To Waterproof Strip to Wire/Extension Connections

Pigtail Wrap Kit for Nodes / Modules / Power Supplies (Up to two connections) [Add $0.79]
Pigtail Wrap Kit for Strips (Up to two connections) [Add $0.89]
No wrap kit - I'll provide my own waterproof connection

Qty:  
[Product Description Page] [FAQ & Documentation Page]
 
.
Hands on Demo
How to Solder This Extension Onto a Pixel String
How to solder pigtails & Extensions
onto RGB Pixel Strip Ribbon
Product Features
  • General Product Information
    • Waterproof cable used for low voltage interconnections
    • Compatible with all EasyPlug3 Extensions, Controllers and Pixels
    • NOTE: This cable is designed for connecting to or with other EasyPlug3 standard products. Not for use in connecting with any non-standard waterproof plugs, even if other cables or plugs may have a similar in design or size.
  • Included, optional and customer supplied items
    • Items included with this item/product/bundle:
      • Single cable with a male and female plug
      • One Waterproof silicone o-ring gaskets (for male side)
      • One plastic cable connector nut (used on male side)
    • Suggested items for operation:
      • Shrink wrap tubing (for sealing soldered connections).
      • Solder and soldering iron. We do not recommend wire nuts or electrical tape be used for connections.
      • Hot Glue or Silicone Caulk for strip connections
    • Customer supplied tools or items:
  • Estimated assembly time:
    • 5-15 minutes per cable set
  • Technical Specifications
    • Waterproof Level: 67 (more info) - Assumes proper waterproofing connections by customer
    • Individual Wires:
      • Wire gauge: 18 AWG
      • Wire (individual) jacket diameter: .07"
      • Conductor resistance (≤20 cel (Ω /km): 39 Ohms per Kilometer
    • Jacket:
      • Color: Black
      • Diameter: .25" (1/4")
      • Material: PVC
        • Rating: GB5023.5-1997 / 300v AC
      • Jacket material resistance
        • Solvent: Fair
        • Acid: Good
        • Base: Good
        • Flame: Good
        • Humidity / Water: Good
    • Dimensions & Weight
      • Maximum diameter of male (with pins) connector:: ~.7" (3/4")
      • Maximum diameter of cable with connector nut: .92" (15/16")
      • Total length of cable (connector to connector): ~60" / 5 Feet
      • Length of one pigtail excluding molded plug connector: 27.5"
      • Cable assembly weight: .25 pounds
  • County of Origin / Assembly:
    • China
  • Certifications & Approvals
    • Underwriters Laboratories (UL) Certified/Recognized/Approved: No
    • CE: No
    • ROHS (Lead Free): Yes
  • Warranty
    • 60 days from date of purchase OR until December 31st of the year in which the product was purchased. For complete information, see our warranty details.
  • Product Revision history
    • 18-Aug-2014 Initial listing

You might also be interested in...
Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 10ft EasyPlug3 Input Cable / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 or 1903 / RGB Color Output Order Smart / Pixel RGB LED Node 8mm/12mm / 5v / 2811 / 50 Node String / 3" Spacing / Black / Waterproof EasyPlug3 Input and Output Cables Heat Shrink Controller Pigtail Output Identification Labels / .375 Inch Diameter Smart / Pixel RGB LED Node 8mm/12mm / 12v / 2811 / 50 Node String / 3" Spacing / Black / Waterproof EasyPlug3 Input and Output Cables
Our Price: $24.99

Add
Our Price: $17.99

Add

Add
Our Price: $23.49

Add
Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 10ft EasyPlug3 Input Cable / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 or 1903 / RGB Color Output Order Smart / Pixel RGB LED Node 8mm/12mm / 5v / 2811 / 50 Node String / 3" Spacing / Black / Waterproof EasyPlug3 Input and Output Cables Heat Shrink Controller Pigtail Output Identification Labels / .375 Inch Diameter Smart / Pixel RGB LED Node 8mm/12mm / 12v / 2811 / 50 Node String / 3" Spacing / Black / Waterproof EasyPlug3 Input and Output Cables

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 76 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent Quality August 11, 2019
Reviewer: Jaime Coughran from Klamath Falls , OR United States  
These extensions are excellent quality, tinned at the ends making soldering easier. Stong cabling appears it will hold up through tough winters, rain or extreme weather in general.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 April 18, 2019
Reviewer: Dave Wallace from Sterling Heights, MI United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect for power injection March 14, 2019
Reviewer: Gary Morrison from Pekin, IL United States  
I used these for my power injection on my 13x39 matrixes. I will be purchasing more of these in the future as I expand my pixel skill.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great for making custom pixel strings February 27, 2019
Reviewer: Thomas Pursell from Paola, KS United States  
Great for making my pixel strings any length.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Well made product February 21, 2019
Reviewer: Graeme Smail from Washington, DC United States  
Purchased the EasyPlug3 Pigtail to check out the build quality. Very happy with the quality. It looks solid and has 18 AWG cable which looks like it will handle it well. Pigtail cable length is also quite generous.

Was this review helpful to you?

View All Customer Reviews