Home > DIY Products > RGB Controllers > Smart / Pixel / Intelligent Controllers - Over 170 Pixels (E1.31 Ethernet Based DMX Input) >

16 Output AlphaPix E1.31 Controller + 350 Watts of Power + Standard Enclosure + 16 EasyPlug3 Pigtails / 5,540 Pixels / Ready2Run Assembled
16 Output AlphaPix E1.31 Controller + 350 Watts of Power + Standard Enclosure + 16 EasyPlug3 Pigtails / 5,540 Pixels / Ready2Run Assembled
Photo shows optional male pigtails


 
Additional Photos:


Price Without Optional Items: $319.98
Sale Price: $249.98
You Save: $70.00


Availability/Ships: Same Day, Sporadically up to 3 days (Delivery Time Information)
Product Code: 832


The following items are included with this product:

EasyPlug3 Male Pigtails (DIY Applications)

16 of Male EasyPlug3 Pigtail Cables [Add $19.99]    - Save $8.65 when purchased with controller
- Male pigtails not necessary when used with HolidayCoro EasyPlug3 Pixel lights
- Male End Only, Female pigtail is already installed with Ready2Run Controllers
- Discounted price only available at time of controller purchase
To Cap Unused Female Plugs

16 of Male EasyPlug3/4 Plugs for Female Pigtails [Add $5.99]
Output Voltage / Wattage of Controller

12v / 350w Power Supply
5v / 350w Power Supply
CAT5 Network Data Signal Cable

No Data Cable - I'll Provide My Own
14 Foot / 4 Meter Green CAT5 Data Cable for Data Signal [Add $3.49]
25 Foot / 7.6 Meter Green CAT5 Data Cable for Data Signal [Add $3.99]  - Save $.50
50 Foot / 15 Meter Green CAT5 Data Cable for Data Signal [Add $5.79]  - Save $.70
100 Foot / 30 Meter Green CAT5 Data Cable for Data Signal [Add $8.99]  - Save $2.00
Pre-Configured Input Voltage & Plug Type

110/120 Input Voltage and Input (United States, Canada, Mexico, others) - Type B Plug
220/240 Input Voltage and Input (Australia, NZ, China, Others) - Type I Plug
220/240 Input Voltage and Input (All Other Countries) - Type B Plug 
Click here for voltage and plug details
Setup and Troubleshooting Assistance

Regular Support (via E-Mail) - Included with controller purchase
Priority Support (via Phone) - With Controller Purchase [Add $49.99] | Purchased Separately [$99.99]
Click here for detailed information about support levels and response times (opens in new tab)
Controller Warranty Period

Pixel Controller - No Warranty / No Return [No Additional Cost]
AlphaPix 16 Controller - 1 Year Hardware Warranty (Ready2Run Assembled) [Add $15.99]
AlphaPix 16 Controller - 3 Year Hardware Warranty (Ready2Run Assembled) [Add $29.99] 
Click here for detailed information about our warranty policy (opens in new tab)
Click here for information on why we offer warranty options (opens in new tab)
  - Warranty period cannot be adjusted after purchase
  - Warranty applies only to controller, standard warranty applies to all other items in package
 - Controller hardware is identical for all warranty levels

Qty:  
[Product Description Page]
 
.
Product Features
This pre-assembled package includes everything but the lights using our sixteen output AlphaPix 16 controller. This package is useful for customers that want to use our EasyPlug3 lights and EasyPlug3 extension cables for a 100% solder free and plug and play solution. This fully assembled kit features:

  • A modern AlphaPix 16 - E1.31 Pixel controller able to handle the following:
    • 16 dedicated SPI pixel outputs
    • 3 dedicated RS485 outputs for legacy devices
    • 5,540 total pixels total / 340 per output + 1,536 channels on dedicated RS485 outputs
    • LCD Interface
    • Up to 5 amps of power per output (60w @ 12v / 25w @ 5v per output)
  • Weather proof mounting enclosure and mounting plate for controller and power supply
  • Power
    • 5v or 12v output (see options above)
    • 350w Watt power supply (both banks connected to single power supply)
    • Input voltages from 90 to 240 volts AC (see options above)
      • US or Australia power input plugs (see options above)
  • Sixteen, 18 inch, pre-attached EasyPlug3 pigtails which work with all HolidayCoro EasyPlug3 extension cables and pixels
    • Each pigtail output is marked with a color coded label indicating voltage and output number
  • Fully wired, tested and ready for you to attach your EasyPlug3 pixel lights or your own pixel strings using our EasyPlug3 Male Pigtails (soldering required - see optional male pigtails above)
  • Fully compatible with LOR S3/S4/S5, xLights, LightShow Pro, Vixen, Nutcracker, HLS, Madrix and hundreds of other E1.31 and ArtNet sequencing and control applications. See our AlphaPix setup page for complete setup details
This controller is able to directly run, without and with power injection the following combinations of pixel lights:

Without Power Injection
100% Controller Duty Cycle
(100% Full White Output / May require one power supply per bank)
60 Amp input
With Power Injection
(@ 100% Full White Output)
Maximum
Per Output
Maximum
Per Controller
Maximum Per Output Maximum Per Controller
30LED/10IC Pixel Strip - 5 Meters / 16.4 feet
1 16 6 108
30LED/30IC Pixel Strip - 5 Meters / 16.4 feet 1 16 2 36
48LED/16IC Pixel Strip - 5 Meters / 16.4 feet 0 0 4 69
60LED/20IC Pixel Strip - 5 Meters / 16.4 feet 0 0 3 55
60LED/60IC Pixel Strip - 5 Meter / 16.4 feet 0 0 1 18
8mm/12mm Pixel Node (bullet or flat/square) - 5v 83 Nodes

1,328 Nodes

320 Nodes 5,540 Nodes
8mm/12mm Pixel Node (bullet or flat/square) - 12v 111 Nodes

1,776 Nodes

320 Nodes 5,540 Nodes
Rectangle or Square Pixel Modules - 12v 78 Modules
1,248 Modules 320 Modules 5,540 Modules
Brilliant Bulb (single bulb) 125
Bulbs
2,000
Bulbs
320 Bulbs 5,540 Bulbs

NOTES: The above maximum recommendations can vary based on a variety of factors including - voltage, wire gauge, distance between pixels, temperature, color of light output, controller duty cycle, customer expectations of color rendering and other factors.

You might also be interested in...
100 Count / 5 x 20 / Mini Matrix / Pixel Icicles Smart / Pixel RGB LED Node 8mm/12mm / 12v / 2811 / 50 Node String / 3" Spacing / Black / Waterproof EasyPlug3 Input and Output Cables
Our Price: $42.99

Add
Our Price: $23.49

Add
100 Count / 5 x 20 / Mini Matrix / Pixel Icicles Smart / Pixel RGB LED Node 8mm/12mm / 12v / 2811 / 50 Node String / 3" Spacing / Black / Waterproof EasyPlug3 Input and Output Cables

Average Rating: 5 of 5 Total Reviews: 39 Write a review »

  0 of 0 people found the following review helpful:
 
Great Product June 11, 2018
Reviewer: Caleb Tyson from Little Rock, AR United States  
As with all the controllers I have received from HC, these work great and have no issues!  My favorite thing about these particular controllers are the test features.  I can easily see a quick simple effect using "Test Mode," a feature my non HC controllers do not have! Great product.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Easy to Setup! May 19, 2018
Reviewer: Robert Copeland from Ridgecrest, CA United States  
This is controller number 7 that I have ordered through holiday Coro. Easy set up and they are willing to help with any issues or questions.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Product May 10, 2018
Reviewer: Edward Bridges from Grayson, GA United States  
Quality product, fast shipping,  great support.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Love the alpha pix April 28, 2018
Reviewer: Fishbulb from Bethesda, MD United States  
This really is a great controller. It has a lot of functionality built in. We own about a dozen of these and they are just great. Highly recommend. This is a flagship HolidayCoro product.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great package April 19, 2018
Reviewer: Nathanial Rhodes from Sparks, NV United States  
This ready-to-run package is perfect for a quick and easy build.  Truly a plug & play solution.  I highly recommend the AlphaPix to anyone searching for a versatile pixel controller.

Was this review helpful to you?

View All Customer Reviews