Home > PRE-SEASON Sale >

PRE-SALE: Smart / Pixel LED RGB 8mm/12mm Square / Lay-Flat Node - 12v / 2811 / 100 Node String / Black / Waterproof EasyPlug3 Input and Output Cables (Ships Feb to June 2021)
PRE-SALE:  Smart / Pixel LED RGB 8mm/12mm Square / Lay-Flat Node - 12v / 2811 / 100 Node String / Black / Waterproof EasyPlug3 Input and Output Cables (Ships Feb to June 2021)


 
Regular Price: $44.98
PRE-SALE Price: $28.95
You Save: $16.03


Availability / Ships: Feb to June 2020
Product Code: 671-WP-PS

EasyPlug3 Female Pigtail for RGB Pixels

None - I am using HolidayCoro Extensions and/or Controllers
1 of Female EasyPlug3 / Start Pigtail Cable / 20 AWG [Add $0.79]
    - Not required when used with HolidayCoro extensions and controller systems
EasyPlug3 Male Pigtail for RGB Pixels

1 of Male EasyPlug3 Output / End Pigtail Cable / 18 AWG [Add $1.99]
    - Not required when used with HolidayCoro extensions and controller systems
1 of Male EasyPlug3 Output / End Pigtail Cable / 20 AWG [Add $0.79]
    - Not required when used with HolidayCoro extensions and controller systems
To Cap Unused Female Plugs

No Plugs for Unused Female Pigtails
1 of Male EasyPlug3/4 Plugs for Female Plugs [Add $0.29]168,169,169-PS,671-WP,671-WP-PS,672-WP,673-WP,694-WP,706-WP,707-WP,708-WP,709,710-WP,711-WP,712-WP,713,715-WP,717-WP,718-WP,757-WP,758-WP,809

Qty:  
[Product Description Page] [FAQ & Documentation Page]
 
This is a PRE-SALE item and ships between Feb and June 2020 - for immediate shipping, purchase the in-stock product instead.

Product Features

  • Features
    • Designed for single run, non-power injection projects like live tree "wrapping", snow flakes and more
    • Please note that these require a smart pixel controller - these will not work with dumb controllers!
    • Smart / Pixel Nodes
    • Square / Flat Style
    • Pixel protocol 1903/2811 (supported by every major pixel controller)
    • Viewing angle of 120 degrees
    • Waterproof input and output connections for easy, no solder connections
    • Black wire
  • Lights
    • Total LEDs per node: 3 (Red, Green, Blue)
    • Total LED nodes per string: 100
    • Total DMX channels required per string: 300 DMX Channels
  • Dimensions
    • Overall Length from node 1 to node 100: 28 feet (varies slightly)
    • Node to node (center) distance: ~3.4 inches
    • Lead in and lead out wire length with waterproof plugs:
      • Start: 6 Inches (male)
      • End: 6 Inches (female)
    • Maximum diameter of node: 12mm / .47"
    • Length of node body: 30mm / 1.21"
    • Overall length of node and LED: 1.46"
  • Weather
    • Silicone body/base
    • Epoxy sealed body/casing to ensure waterproof wiring and electronics
    • IP68
  • Power
    • Pixel direction is marked with arrows on circuit board (input side)
    • 12v DC Input
    • White (all three colors) per node: 45 miliamps / .55 Watts
    • White (all three colors) per string (100 nodes): 4.4 amps / 55 Watts @ 12v DC (this amount can vary by temperature, wiring to the string and supply voltage)

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 Not Perfect June 17, 2020
Reviewer: Terry Cooper from West Chester, OH United States  
There is about a 5 percent rate of  malformed pixels where they are too small for the intended hole. For my purpose, I can zip tie them in place, but it makes construction more complicated.  These are the first pixels of this type I've used so can't compare to others

Was this review helpful to you?