Home > PRE-SEASON Sale >

New!  PRE-SALE: HolidayCoro HC-2500 Controller and Power Supply Mounting Enclosure Housing - Open Bottom (Ships Jan to June 2021)
PRE-SALE: HolidayCoro HC-2500 Controller and Power Supply Mounting Enclosure Housing - Open Bottom (Ships Jan to June 2021)
NOTE THAT PHOTOS ALSO SHOW CLOSED BOTTOM


 
Additional Photos:


Regular Price: $28.99
PRE-SALE Price: $22.95
You Save: $6.04


Availability / Ships: Jan to June 2021
(Delivery Time Information)

Product Code: 629-11-PS

Cable Passage and Cable Strain Relief

None - I will provide my own cable clamps
1 of 3/4 Inch Cord Grip for HC-2500 Enclosure [Add $1.29]
2 of 3/4 Inch Cord Grip for HC-2500 Enclosure [Add $2.58]
1 of 1 Inch Cord Grip for HC-2500 Enclosure [Add $1.49]
2 of 1 Inch Cord Grip for HC-2500 Enclosure [Add $2.98]
4 of 1 Inch Cord Grip for HC-2500 Enclosure [Add $5.96]
HC-2500 End-Plate Options

Blank Plate - Customer Must Cut Holes As Needed [Add $1.49]
Two 1 Inch Clamp Holes Left and Right [Add $1.49]
Two 3/4 Inch Clamp Holes Left and Right [Add $1.49]
Two 1 Inch Clamp Holes, CAT5 Bulkhead, Strain Relief [Add $1.49]
Four 1 Inch Clamp Holes, 2 CAT5 Bulkhead, Strain Relief [Add $1.49]
Bulkhead Cable Gland Strain Relief

Cable Gland and Strain Relief for Power or CAT5 Cables [Add $0.49]
To Pass CAT5 Data Cable Through Base Of Controller

No CAT5 Bulkhead Connector
1 of 11.8 in / 300mm Bulkhead CAT5 Extension [Add $4.99]
2 of 11.8 in / 300mm Bulkhead CAT5 Extension [Add $9.98]
Confirm Purchase Specific Requirements

I understand this is a PRE-SALE product and may not ship until June 2021

Qty:  
[Product Description Page]
 
This is a PRE-SALE item and ships between January and June 2021 - for immediate shipping, purchase the in-stock product instead.

Video shows both open and closed bottom
Product Features
  • General Information
    • This enclosure was designed for controllers and projects that are too confined or just too large for the CG-1500 enclosure. This enclosure has:
      • Increased Depth - Allows up to 4 vertical power supplies to be mounted into a single enclosure
      • Increased Height - Allow for more space at the base of the controller for newer, larger controllers
    • Designed for outdoor use with full UV protection incorporated into the plastic
    • Extremely durable due to the use of a polycarbonate material. This enclosure is 140% stronger than the material used in the CG-1500 enclosure
    • The UL listed plastic resin also incorporates the highest rated UL94, 5VA fire resistant material
  • Features
    • Flat top (compared to the ribbed top on the CG-1500) allows for application of labels.
    • Easier storage - Since the enclosure is flat on the top and bottom, stacking enclosures during storage is easier than the CG-1500
    • Available in open and closed bottoms:
      • Open (this listing page) - Allows the use of a bottom end closure that is removable, making repairs or other changes to the controller easier. Also allows for pre-cut holes for clamps, CAT5 cables and power wires - see our list of custom mounting solutions here.
      • Closed (this listing page) - This solution is similar to the CG-1500 which has not pre-drilled holes. Designed for DIY applications.
Parameter / Test HC-2500 Specifications (this product page) CG-1500 Specifications Differences Between Units
Izod Impact, Notched (ASTM D256)

This test determines damage due to
puncture with a sharp objest
12.0 ft-lb/in 5.0 ft-lb/in 6.0 ft-lb/in / HC-2500 is 140% Stronger
Flammability (UL94)

This test determines if the plastic
will continue to burn if ignited
5VA
(highest possible rating)
5VA
(highest possible rating)
Same
Inside Dimensions 12 in Tall / 30.48 cm (smallest dimension as the enclosure tapers)
9.7 in Wide / 24.63 cm (smallest dimension as the enclosure tapers)
4.73 in Height (Depth) / 12.01 cm (bosses to bosses inside)

Height: HC-2500 is 15.9% Larger
Width: Both products the same width
Depth: HC-2500 is 14.3% Larger
Overall Volume: HC-2500 is 27.9% Larger
Outside Dimensions

13.75 in Tall (including flange) / 34.92 cm
11.54 in Wide (including flange and hinges) / 29.31 cm
5.89 in Deep (height) / 14.96 cm
Open Bottom Dimensions
2.5 in Tall / 6.35 cm
8.6 in Wide / 21.84 cm
See dimensional drawing below
N/A The CG-1500 has no open bottom, customer must drill holes
Clamp Two nickle plated steel, rust resistant spring clamps Stainless 3/8" Bolt and
Brass nut
The HC-2500 can be opened by hand without special tools


Click here for DXF CAD drawing for the mounting bosses and mounting plate dimensions.


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 HC-2500 enclosure August 15, 2019
Reviewer: Bob from Newton, NJ United States  
Much deeper than the CG-1500. I fit 2 power supplies, 2 distribution boards and an AlphaPix 4 with room to spare! Also liked the fact that you have a choice of bottom plates to drill and mount cable glands.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great Enclosure HC-2500 August 6, 2019
Reviewer: Roger Hebert from Katy, TX United States  
I like this enclosure David took the  GC-1500 and made it better!!! you can put just about anything into it. I like that you can change out the bottom part if you want to update your controllers or wiring.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 HC-2500 Enclosure July 7, 2019
Reviewer: Ken Iverson from Seattle, WA United States  
I was really happy when the larger enclosure was introduced.  It allows for two power supplies and two controllers quite nicely and I also love the CAT-5 connectors, too.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Quality looks great April 4, 2019
Reviewer: David Bond from Andover, KS United States  
Haven't used it outside yet but it is better than the cable guard and cheaper than the Bud Industries.

Was this review helpful to you?