Knowledge Base:  

Knowledge Base : configuration
Page of 1
HinksPix Setup and Instructional Page
Congratulations on the purchase of your HinksPix PRO controller. This page contains all the videos for how to do just about everything with this controller. Major Function
Controller Firmware Page
HolidayCoro Firmware Page Step-by-Step Firmware Upgrade Instructions NOTES: We highly recommend updates of firmware from a Windows PC ( Mac platform not supporte
AlphaPix Technical Support Page
All support and technical assistance for the AlphaPix controllers can be found on this page. If you are looking for controller specific information, including purchasing the AlphaPix, see this page: h
AlphaPix Evolution vs. HinksPix Pro
Differences between the AlphaPix Evolution and HinksPix Pro CPUs used in the Flex Expansion System The chart below shows the individual technical differences between the two CPUs offered for
Light-o-Rama LOR CTB16PC Comparison with HolidayCoro AC Controllers
This page contains comparisons between HolidayCoro AC controllers and LOR AC Controllers Major Function Feature / Product Links >>> HolidayCoro Evolution AC16
SD Card Not Reading or Working with HinksPix PRO CPU
PROBLEM: When attempting to save your configuration information when using the design tool or when attempting to play a sequence created with the HSA application, your SD cannot be read or written to.
Flex Expansion System Setup and Troubleshooting
This page is a place holder for the updated Flex expansion setup and configuration information. This page can be referenced at: https://www.holidaycoro.com/flex
Configuring the Alphapix Controller with Madrix
The AlphaPix line of controllers work with Madrix. For general AlphaPix setup information including configuration of your PC, wiring and other details, see our AlphaPix setup page . For Madrix supplie
Procedure for repair of a mid-span failure in pixels
This article details how to repair pixels (nodes, modules, strip, bulbs) when that length of lights has a mid-span failure. This process does not apply to pixels with one or two failures of a single c
How to make two Pixel Megatrees play the same sequence
Customers with 360 degree pixel megatrees may wish to use pre-made sequences for 180 degree trees and have the same content displayed on both sides of the tree. This article explains how to mirror out
Displaying one sequence on two identical pixel megatrees
For some installations where two 180 degree trees are used with two separate pixel controllers, you may wish to "duplicate" the output so that each tree shows the same sequence for one half of the tre
SMART Long Range Support Page
Welcome to the Long Range SMART Receiver Setup and Training Page Subject Video Overview of how Long Range REGULAR and SMART technologies work and the limitations a
Troubleshooting: xLights Confirmation Capture
You have been directed to this page due to a reported configuration issue with xLights software. This page provides information on how to properly capture the information that our HolidayCoro technica