Return to DISCONTINUED: 4 to 12 Port Long Range Flex Expansion Board System E1.31 Controller / EasyPlug3 Pigtails / 5,440 to 10,880 Pixels / Ready2Run Assembled / AlphaPix Evolution or HinksPix Pro CPU

Sort By:: Most Helpful Newest Rating: High to Low Rating: Low to High	Page of 2

0 of 0 people found the following review helpful:

Great Hardware - November 26, 2023 Reviewer: Dwight Nelson for Alex Fuller from Tucson, AZ United States   Very happy with the quality of the preconfigured products!  The build is well done. I’d like covers over the power inputs but not a game changer. Kinda figured the the Meanwell power supplies had these included. Would like to see manuals and specifications written for the products. It’s a bit tedious to have to watch the videos to find one bit of info. The videos are great but there is value in the written word, especially for technical professionals. Thanks for providing a quality product at a competitive price. Was this review helpful to you?

0 of 0 people found the following review helpful:

I patiently waited.... August 22, 2022 Reviewer: Mikel Williams from Savannah, TX United States   I would check every few weeks.  I jumped at the order as soon as this was in stock this year. It thoroughly exceed my expectations. - while I will stream data to the CPU over network, the ability to use as master device, to work with other cpus... storage, stand alone mode....fm transmitter.. audio output!! COME ON!!!  talk about a bargain! Was this review helpful to you?

0 of 0 people found the following review helpful:

This little guy gets the job done. January 21, 2022 Reviewer: KJ VanNatta from Mineral Wells, TX United States   Don't be drawn in by other controllers that can handle 1000+ pixels on each port if you're just starting out.  300 or so per port is more than enough so that you don't over-run your power supplies and have to map out long model chains and power injection. Stick to 340 or less and enjoy your show. When you're ready to grow, simply add more receivers. Was this review helpful to you?

0 of 0 people found the following review helpful:

Easy to set up January 19, 2022 Reviewer: Kenneth Ward from Fairfax Station, VA United States   Love the fully built and ready to go option. I got one that only had four long range ports for my first year doing this. Initially had a problem with the software side as it was only sending outputs on one channel on one port, but there was a setting buried deep in the web browser-based configuration. I had to change the default refresh from 750 kHz to 700 kHz and everything instantly worked like a charm. Would not have thought of that being an issue and it wasn't easy to troubleshoot, but once that demon was exorcised it has been flawless. Was this review helpful to you?

0 of 0 people found the following review helpful:

HinksPix CPU with smart receivers November 7, 2021 Reviewer: Terry from Westlake Village, CA United States   The HinksPix controller turned out to be a great product. Works mostly like the AlphaPix, another great product. Bought this one so I could extend the receivers through daisy chaining which can really help with larger area displays and it cuts down on cat 6 cable. For the farther away areas I’ve added the HinksPix CPU, 2 long range boards, 2 new remote controllers, each with two 4 port smart receivers. Highly recommend you watch the Joe Hinkle video for two 4 port receivers daisy chained. This does not work like I would have thought. Basically 2 physical ports are using the same Dara stream. I won’t even try to explain it but the video helped me get my receivers up and running. Was this review helpful to you?

0 of 0 people found the following review helpful:

Just don't use it with FPP October 28, 2021 Reviewer: Jared Terry from Austin TX   So it was really easy to setup the AlphaPix system but then it was freezing on me every night.  Locked up and stopped responding to pings, and would require power cycle to recover. Found out from support they have other customers in the same boat with FPP as the head.  If they fix this problem its 5 stars, but with the problem its more or less a thorn in my side. ---- HOLIDAYCORO RESPONSE ---- The third party FPP is a very very complex product to properly configure.  We do have hundreds of customers using the AlphaPix CPU with FPP, we just are unable to assist customers in configure the FPP. Was this review helpful to you?

0 of 0 people found the following review helpful:

August 30, 2021 Reviewer: Roger Crawford from Edgewater, FL United States   Was this review helpful to you?

0 of 0 people found the following review helpful:

Powerful Controller August 10, 2021 Reviewer: David Downing from Oceanside, CA United States   I have integrated the HinksPix Pro controller with the 12 port long range flex expansion board system with the SMART Long Range Receivers into my mainly LOR system, and couldn’t be more pleased as to the results. I was looking for a way to control the RGB pixels on my eaves, 1st and 2nd story, without the need to DC inject because of the length of cable needed from the controllers.  I was able to not only power up the eaves, but also add additional snow flakes from the eaves as well. The HinksPix Pro controller was able to handle 48 ports worth of pixels flawlessly, making it a nice addition to my show. I was so impressed with the customer service, as well as the technical support videos, that I purchased a second HinksPix controller for this years show. Was this review helpful to you?

0 of 0 people found the following review helpful:

Very easy and simple to use! May 5, 2021 Reviewer: Josh Templeton from San Antonio, TX United States   I bought this as my first smart controller.  So simple to setup and use.  If you are looking for something pre-built and ready to go out of the box, this is the controller you are looking for. Only downside is the only PSU option is 300watt.  being as no pixels will be directly connected, i wish there was a smaller watt PSU available. Was this review helpful to you?

0 of 0 people found the following review helpful:

4 to 12 Port Long Range Flex Expansion Board Syste April 22, 2021 Reviewer: Charles Burdick from Erie, PA United States   This is my first  time running any of this. It was very easy to get online and set up. For first timers,  watch the video's and they will guide you through it .Easy to add boards. Was this review helpful to you?