Home > By Location / Season > By Location - Ground >

DISCONTINUED: Singing Christmas Tree (Single Tree) - RGB (46" x 46") + Assembled Controller + RGB Lights (Requires Some Assembly)
PRODUCT PHOTO: Singing Christmas Tree (Single Tree) - RGB (46" x 46") + Assembled Controller + RGB Lights (Requires Some Assembly)
Photos Show Fully Assembled Product


 
Our Price: $389.99



Availability / Ships: Same Day / Intermittently up to 3 days / Delivery Times
Product Code: 100RGB-KIT1


The following items are included with this product:

DMX Data Generation Source To Be Used

I Already Have an Actidongle or Other RS384 Based, E1.11 / DMX 1990 Data Source
1 of ActiDongle - DMX Dongle (Enttec Pro Compatible) [Add $65.49]
Using AlphaPix or EasyLights RS485 Interface  << Click this link for setup information using AlphaPix / EasyLights controllers
NOTE: This dumb controller will not connect directly to the Ethernet (CAT5) jack on a PC or network switch
When using with LOR S3/S4/S5, requires Actidongle (see above) and LOR Advanced edition Software
Pre-Configured Input Voltage & Plug Type

110 / 120v @ 60Hz Input / Type B Plug (United States, Canada, Mexico, Others)
220 / 240v @ 50Hz Input / Type I Plug (Australia, NZ, China)
220 / 240v @ 50Hz Input / Type F Plug (Most of Europe and Russia)
220 / 240v @ 50Hz Input / Type G Plug (United Kingdom / Ireland / Singapore)
220 / 240v @ 50Hz Input / Type B Plug (United States, Canada, Mexico, Others)
    Click here for voltage and plug details
Controller Warranty Period

30 Channel Dumb Controller - 30 Day Factory Defects Only [No Additional Cost]
30 Channel Dumb Controller - 1 Year Hardware Warranty (Ready2Run Assembled) [Add $8.99]
30 Channel Dumb Controller - 3 Year Hardware Warranty (Ready2Run Assembled) [Add $19.99] 
Click here for detailed information about our warranty policy (opens in new tab)
Click here for information on why we offer warranty options (opens in new tab)
  - Warranty period cannot be adjusted after purchase
  - Ready2Run Packages: Extended warranty applies only to controller, standard warranty applies to all other items in package (Pixels, Mounting Hardware, Etc)
 - Controller hardware is identical for all warranty levels
CAT5 Ethernet and Long Range Data Signal Cable

No Data Cable - I'll Provide My Own
10 Foot / 3 Meters Green CAT5 Data Cable for Data Signal [Add $3.49]
25 Foot / 7.6 Meter Green CAT5 Data Cable for Data Signal [Add $5.49]
50 Foot / 15 Meter Green CAT5 Data Cable for Data Signal [Add $8.99]
100 Foot / 30 Meter Green CAT5 Data Cable for Data Signal [Add $18.99]
200 Foot / 60 Meter Green CAT5 Data Cable for Data Signal [Add $42.99]
Click Here For Complete CAT5 List and Accessories

Qty:  
[Product Description Page] [FAQ & Documentation Page] [Customer Videos Page]
 
This kit comes complete with the RGB lights, pre-assembled controller and wiring along with the Singing Christmas Tree itself - all in a waterproof enclosure. Some assembly required for installation of lights and minor soldering.
Sample Video - This isn't computer generated, it is video of the real unit shot in a lit room stopped down on the camera
How to Build the Support Frame
Assembly Video
How to convert single output sequences to RGB sequences
Product Features
  • General Product Information
    • Intended locations for use:
      • Ground / Yard
      • Wall / Fence / Doors
      • Roof
    • Holiday Seasons:
      • Christmas
    • Other:
      • Talking: Introductions to songs, voice overs (display hours, rules)
      • Singing: Singing to songs with vocals
    • Produced from weather resistant and strong plastic (see below for details)
    • Reverse side/ back is pre-marked with a contrasting, water proof marker that shows the exact path that should be followed for bulb population and the number of RGB nodes required for section
  • Channels and Controllers
    • Light Requirements
      • RGB Nodes (Included in this kit)
    • Channels
      • Channel #1 Top Lip: 19 Nodes (String with pre-attached male plug, cut after 19th node)
      • Channel #2 "Oh" Mouth: 25 Nodes (Add male pigtail and combine with remaining nodes from channel #1)
      • Channel #3 "Ah" Mouth: 30 Nodes (String with pre-attached male plug, cut after 30th node)
      • Channel #4 Middle Mouth: 30 Nodes (String with pre-attached male plug, cut after 30th node)
      • Channel #5 Bottom Mouth: 33 Nodes (String with pre-attached male plug, cut after 33rd node)
      • Channel #6 Eyes Open (both): 62 Nodes (String with pre-attached male plug > 50 Nodes > combine with remaining nodes from channel #3)
      • Channel #7 Eyes Closed (both): 18 Nodes (Add male pigtail and combine with remaining nodes from channel #4)
      • Channel #8 Tree Outline: 90 Nodes (String with pre-attached male plug > 50 Nodes > Female Plug > pre-attached male plug > Cut after 40 nodes)
      • Total nodes required: 307
    • Compatible controllers:
      • 30 Channel Controller (Included in this kit)
  • Included, optional and customer supplied items
    • Items included with this item/product/bundle:
      • Three, 4MM (3/16"), ultraviolet resistant, outdoor rated corrugated plastic sheets (see our Knowledge Base for more detailed information about the coro that we use in our products).
    • Additional Required items for operation:
      • Mounting frame – usually inexpensive 2” x 4” material. See our instructions in the Knowledge Base or the assembly video on this page for more information on mounting and frames.
      • Wood or drywall screws (see assembly video)
      • Approximately 1” Fender washer - This spreads out the load and ensures a good grip on the coro to the wood. These can be purchase from the options above. (See assembly video)
      • Misc items – Solder, zip ties, shrink wrap, waterproofing for controllers. Any mounting or additional materials require to affix the panels to their mounting location.
    • Optional items:
    • Customer supplied tools:
  • Assembly Instructions and Recommended Reading/Watching
  • Estimated assembly times
    • Building frame: 30 to 60 minutes
    • Installing nodes, soldering connections, attaching wiring to controller: 1 1/2 to 2 1/2 Hours
  • Technical Specifications
    • Color: Black Coro
    • Material thickness: .16" per sheet / .33 total thickness
    • Overall dimensions: 46” x 46” (includes 1.5” border for 2” x 4” mounting frame) – inside/design dimensions of 43” x 43”. For off-season storage, see our Knowledge Base
    • Shipping dimensions: 23” x 46” (folded down the middle)
    • Weight per Tree: 8.5 pounds (excluding lights or frame) or ~30 pounds with 2x4 frame, nodes, power supply, controller.
    • Temperature Range: -17f to +160f (coro)
    • Material Composition: Polypropylene
    • County of Origin
      • Materials/parts: USA (Texas)
      • Assembly/Mfg: USA (Texas)
      • Design: USA (Texas)
    • Warranty & Support
      • Warranty period
        • 365 days from date of purchase. See our warranty policy for more information.
    • Customization: Yes - This product can be customized to your specific requirements. For costs, lead times and blackout periods, see our Guide to Customized Products.
  • Product Revision History
    • Kit released 24-Oct-2016
      Updated with 30 channel controller 11-Apr-2018

You might also be interested in...
CLEARANCE: ActiDongle (tm) - Active DMX Dongle (Enttec Pro Compatible) - V2
Our Price: $65.49
Excluding Optional Support

Add
PRODUCT PHOTO: ActiDongle (tm) - Active DMX Dongle (Enttec Pro Compatible) - V2

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Thank you Customer Service September 16, 2022
Reviewer: Don Connelly from Friendswood, TX United States  
I recently ordered a signing tree  and after opening found the face wiring diagram didn't agree with a dumb RGB lights. Your customer service responded within a day with all the info needed to complete the wiring. My interactions with your team has always been professional, timely and effective.

Thank You

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Singing Christmas Tree Kit - RGB Nodes December 23, 2020
Reviewer: Alden Lono Pelayo from GARDENA, CA United States  
Wonderful kit and a great starter into RGB Light Displays. Easy to assemble and put together. Had it up and running in a few days.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Singing Christmas Tree Kit - RGB Nodes December 4, 2020
Reviewer: Alden Lono Pelayo from Gardena, CA  
Total Newbie here. So I decided to start off small and purchased the RGB Singing Christmas Tree to get my feet wet. Kit arrived much earlier than expected and am really super stoked and excited to start working on it! Everything was well packaged and protected.

Thanks so very very much - let's hope I don't screw it up somehow...!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Singing Christmas Tree Review January 31, 2018
Reviewer: William Grimditch from Willingboro, NJ United States  
Product is excellent. Online instructions and videos provided all the information I needed. The only thing was the assembly video showed only two singing tree templates used, whereas I was shipped three. However, I sent an email to you and you responded promptly saying three were needed. You are doing a great job. Thanks.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Review of SInging Christmas Tree (single tree) June 28, 2017
Reviewer: Leroy Valentin from Little York, IL United States  
I was very pleased with this RGB kit.  It arrived when expected. The instructions were easy to follow.  The kit came with a wrong set of cables, and I was quickly sent the correct cables.  I would suggest a harness ring to anchor the cables to the frame thereby taking some of the strain off solder joints at the last RGB node.

Was this review helpful to you?