 |
Product Features
- General Information
- Available with either the AlphaPix Evolution or HinksPix Pro CPUs
- The system is based on the Flex Expansion Board System which can drive up to three expansion boards
- Using the options above, you can customize your installation as to power and specific expansion boards for your specific project. Each controller is built to order.
- All power wiring including input and output wire is completely assembled
- The lowest cost multi-expansion board based system on the market today
- Supports all major lighting applications
- Light-o-Rama Advanced (S3/S4/S5)
- xLights (all)
- Resolume
- Madrix
- Any applications that supports Artnet / sCAN / e1.31 protocols
- Expansion Board Information
- SPI Expansion Board
- Maximum of 5,440 Pixels or 32 Universes / 16,384 DMX Channels
- Blown fuse indicators (Red LED light will go out when fuse is blown)
- Each SPI board has a dedicated temperature and voltage sensor visible from the screen or web interface on the CPU
- Power Input
- 60 Amps Normal / (30 Amps per bank / two individual bank inputs)
- Wattage per bank (with one power supply as supplied)
- 12 Volts: 360 Watts
- 5 Volts: 300 Watts
- Power Output
- 5 Amps Maximum (mini fused blade) per output
- Wattage per output
- 5 Volts: 25 Watts
- 12 Volts: 60 Watts
- Long Range Differential Expansion Board (Expansion Board)
- Maximum of 5,440 Pixels or 32 Universes / 16,384 DMX Channels (Up to Four Long Range Differential Receiver Boards per Expansion Board)
- Per Port / CAT5 Cable- Up to 1,360 pixels
- Supports only pixels that have three wires (data / positive / negative) - this includes support for all HolidayCoro 2811/1903 pixels (no clock wire is present)
- 300 Feet / 91 meters or greater from expansion board output to receiver input using stand CAT5 network cable
- Note: Receiver boards must only be used with data input from the Long Range Differential Expansion Board - they cannot be used with DMX 1.11/1990 or E1.31 directly
- Long Range Differential Receiver Board (up to 4 per Long Range Expansion Board)
- For use with the Long Range Differential Expansion Board
- Not sold on this page, see: Bare board and Assembled Ready2Run Receiver System
- Per SPI Output - Up to 340 pixels / 2 DMX universes (exclusive of power, see chart below)
- Each output features euro style plugs for easy assembly and removal
- Blown fuse indicators (Red LED light will go out when fuse is blown)
- CAT5 Data Input (requires Long Range Differential Expansion Board for operation, will not work with E1.31 or E1.11 signals)
- Power indicator light
- Power Output
- 5 Amps Maximum (mini fused blade) per output
- Wattage per output
- 5 Volts: 25 Watts
- 12 Volts: 60 Watts
- Up to 10 AWG wire (we recommend a minimum of 18 AWG for power inputs - see our website)
- Polarity reversal input protection
- Voltage Range: 5 to 24v DC
- Power Input
- 20 Amps
- Voltage Range: 5 to 24v DC
- Heavy duty screw down connections that support spade terminals
- Positive and negative clearly marked on board
- Warranty
- 1 Year Warranty on CPU and Expansion Boards
- Excludes:
- CPU Board damage as a result of connection to an LOR network
- Board damage due to improper mounting to a non-conductive surface
- Environmental damage (water, snow, etc)
- Physical damage
- Support
- The majority of our setup and troubleshooting information and videos can be found on our setup pages
- Support options:
- Normal Support - Email / Phone where required, no additional cost
- Priority Support - Dedicate phone number / Remote Control to PC / Email where required, additional cost
- HolidayCoro offers support in the following areas with this controller:
- General wiring and troubleshooting
- Testing of pixels (some non-HolidayCoro pixels may have limited support)
- General setup of the networking needed to support the connection of the controller a Windows PC
- Basic configuration of sequencing applications
- Basic configuration of output to the RS485 output ports
- Complex networking environments
- HolidayCoro does not support the following:
- Sending data over wireless networks
- Configuration of some applications (due to the huge number of applications, we may refer you to your application vendor for instructions on setting up their application)
- Configuration or troubleshooting of individual sequences - please contact your vendor for application specific questions
- Physical
- Operating Temperatures - Negative 4f (-20c) to 158f (+70)
- County of Origin / Assembly
- China (from globally sourced components)
- Country of Design
- AlphaPix: USA / China
- HinksPix: USA
- Flex Expansion: USA / China
NOTES: The above maximum recommendations can vary based on a variety of factors including - voltage, wire gauge, distance between pixels, temperature, color of light output, controller duty cycle, customer expectations of color rendering and other factors.
|
|
 |