Home >

DISCONTINUED: QuickTree™ Pixel MegaTree / 9.5 Ft Tall / 8 Ft Wide / 180 Degrees / 600 Pixels (12 pixels x 50 pixels) / Ready2Run Assembled
PRODUCT PHOTO:  QuickTree Pixel MegaTree / 9.5 Ft Tall / 8 Ft Wide / 180 Degrees / 600 Pixels (12 pixels x 50 pixels) / Ready2Run Assembled
Tree photo shows 10 Visible Strands

Additional Photos:

Our Price: $849.98

Availability / Ships: Same Day, Sporadically up to 3 days (Delivery Time Information)
Product Code: 815-180

The following items are included with this product:
[Product Description Page] [FAQ & Documentation Page]
This product has been replaced with the 16 string version: http://www.holidaycoro.com/800-Pixel-Node-MegaTree-Kit-p/813-180.htm
How to assemble the pixel node strip and pixel topper
Ryan's Pixel MegaTree
(Similar Design)
Product Features

The QuickTree™ Pixel MegaTree system is designed to be THE easiest Pixel MegaTree system on the market today. We include all the lights and mounting hardware, controllers, power and cabling required to complete your project and you can purchase it in DIY if you feel comfortable building it yourself or fully assembled and tested by Holidaycoro, ready to run out of the box. If the following tree doesn't meet your requirements, see our other selections of pre-designed Pixel MegaTrees.

180 Degrees of Coverage
Ideal Viewing Distance From Audience
15+ Feet
Items Suitable for Display
Scrolling text, singing faces,
animated graphics
Ease of Sequencing 12 x 50 "CCR' Sequences
Christmas Sequence Downloads
Halloween Sequence Downloads
Pixel Counts
Total Pixel Nodes per Tree 600
Vertical Sections / Strings 12
Pixel Nodes per Section / String 50 Nodes
Pixel-To-Pixel Spacing 2 Inches
Tree Dimensions
Height (Pixel Area)
8.5 Feet
Height (Overall Maximum) 9.5 Feet
Width (Pixel Area) 8 Feet
Width - Base of Tree (Overall Maximum)
Width of PixNode Strips™ at base
9 Feet
Width - Top of Tree 6.3 Inches
Pixel Spacing - Top (Horizontal / Pixel-to-Pixel) 1.5 Inches
Pixel Spacing - Bottom (Horizontal / Pixel-to-Pixel) 10 Inches
Power Injection Required / Cables per Strand
No / One Cable
Type of pixel used
8mm RGB LED with 12mm Body
Controller - Pre-wired with power and cables
Optionally Available as Pre-Assembled
Lights - Pre-wired with waterproof connections
Optionally Available as Pre-Assembled
Lights / Nodes pre-installed into PixNode Strips
Usually 30 to
60 Minutes
Overall erection time for entire tree
(with assembled hardware)
60 Minutes
DIY Customer assembly time
(excludes erection time)
2 Hours (Experienced)
3 to 6 Hours (Novice)
Additional Required Items (Sourced by Customer)
Center Pole - 1-3/8" Top Rail Tubing
(Home Depot, Lowes, Menards)
One, 10 Foot Section
8 Inch to 12 Inch Galvanized Nail / Stakes
Tent Stake / Re-Bar or Similar
(Depends on local soil and ground conditions)
3 for Low Wind Load Areas
4 for High Wind Load Areas
Guy Wires or Rope 3 for Low Wind Load Areas
4 for High Wind Load Areas
Sequencing Software Works with 100% of all Holiday Sequencing
Software on the market including:
Light-o-Rama S3 & S4
xLights /Nut Cracker
LightShow Pro
Vixen 3
Computer / Show PC Requires PC with Ethernet
network port (nearly all have this)

Type and power of PC
depends on sequencing software
selected by customer.

You might also be interested in...
5 Port 10/100 Ethernet Network Switch for E.131 Networks
Our Price: $17.99

PRODUCT PHOTO: 5 Port 10/100 Ethernet Network Switch for E.131 Networks

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 Just Works August 8, 2017
Reviewer: Ken from Littlefield, TX United States  
Order the product early so that I would have it in time to figure out how to set it up before the holidays.  It arrived in just a couple of days and was really Ready2Run.  It took longer to plug all the strings in than it did to get my PC and software configured to start showing sequences.

Can't tell you about HolidayCoro's tech support because so far I haven't needed it.

Was this review helpful to you?