 |
Product Features
- General Product Information
- Used for reducing 100 to 130 volts to 12.5 volts DC
- Output of 3.75 Amps of power at 12 volts DC
- Output of about 45 watts
- Short circuit protection
- Waterproof to IP67
- Items included with this item:
- Power Supply with bare leads for input and output
- Recommended items for this product
- Shrink wrap tubing for protecting wiring connections (output and input).
- Note we do NOT recommend using electrical tape or wire nuts for wiring connections - this is unsafe.
- Optional Items
- Customer supplied tools or items:
- Required items for operation:
- Shrink wrap tubing (for sealing soldered connections). We do not recommend wire nuts or electrical tape be used for connections.
- Spade/Two prong power input plug for high voltage side
- Solder for attaching RGB lights or controllers
- Optional items
- Mounting (screws, two sided tape, hot glue or other)
- Instructions
- See product page for wiring and product setup videos.
- For DMX + Power over CAT5 wiring, see our video or documentation
- For information on how many LEDs you can run from this power supply, see our Knowledge Base
- Estimated assembly time:
- Technical Specifications
- Color: Silver / Aluminum
- Weight: .65 pounds or 11 Oz
- Dimensions
- Height: 1.0"
- Width (main case, excluding mounting tabs): 9.1" or 9 1/8"
- Width (main case including tabs): 9.72" or 9 3/4"
- Height: .8"
- Depth: 1.15"
- Temperature Range
- Operation: 10 to 120 degrees Fahrenheit
- Storage: -20 to 140 degrees Fahrenheit
- Material Composition
- Case: Aluminum and plastic (end caps)
- Wires: PVC coated - copper
- County of Origin
- Materials/parts: China / USA / Japan
- Assembly: China
- Design: China
- Certifications & Approvals
- Underwriters Laboratories (UL) Certified/Recognized/Approved: No
- CE: No
- ROHS (Lead Free): Not Listed
- Wiring / Interface:
- Power Input (100-130 volts AC)
- Neutral (Large blade of plug): Brown
- Hot (Small blade of plug): Blue
- Ground (Round pin): Yellow / Green
- Stripped and tinned wires ~6" Long
- Power Output (12.5 volts DC)
- Red or Brown (varies by model): Positive 12v
- Black or Blue (varies by model): Negative 12v
- Stripped and tinned wires ~7" Long
- Warranty & Support
- 60 days from date of purchase OR until December 31st of the year in which the product was purchased. For complete information, see our warranty details.
- Customization: Yes - Minimum order of 200
|
|
 |