Product Features
Until now there has never been a good way to mount pixel nodes around poles, columns, tree trunks, roofs, "yard grids", cover bushes or vertical surfaces. Now with PixNode Net™ you can easily space and mount these nodes.
- Versatile Uses - There are a huge number of uses for PixNode Net:
- Matrix Panels - Producing a matrix, be it square, rectangle or an odd shape is as simple as cutting the panels with scissors to fit your project
- Wrapping Columns and Tree Trunks - The flexible nature of the PixNode Net allows easy installation around non-flat surfaces
- Covering entire buildings - Looking for something that really wows - cover the entire surface of your building or roof with a huge matrix
- Durable, Strong and Outdoor Rated - Manufactured from durable, outdoor rated plastics then manufactured on our in-house, computer controlled machines.
- Unlimited Sizes and Shapes - While the nets come in approximately 4 foot by 8 ft panels (see bottom of page for dimensional drawings), just by over-lapping a single row of pixels, panels can be made to any horizontal or vertical size for your project. (does not apply to 1.9" spacing panel)
- Cut to Size - If your net is too large or you have an odd shape such as a circle or triangle, scissors can be used to cut the nets to your exact size.
- Fast Installation - Installation takes only about 2-4 seconds per node making it the absolutely fastest method on the market today
- Works With 12mm Nodes - No matter if your node is a "bullet", "square" or "flat" style, the PixNode net works with all 12mm neck nodes (.43 to .45 inches diameter) on the market today (flat not compatible with 1.0" spacing). For ease of storage when rolled up, we recommend the "square" or "flat" style over the bullet style to reduce the depth of the sheet and to aid in tighter storage.
- Flexible - In nature, nearly everything is flexible and for good reason - it is better to bend than break and this is why our panels are made from flexible materials. This makes handling wind loads a snap, makes storage as simple as rolling them up like a rug and makes them weigh less for easy installation.
- Product Specifications
- All panels
- Cutting panels can be performed with sharp scissors.
- ~11.5mm Pixel Node Hole (slightly undersized from 12mm to ensure a good fit and proper alignment)
- .038" material simulates the native steel that nodes were designed for use with
- 2.0" Center to Center spacing of nodes
- 1,152 total pixels per panel
- 48 pixels x 24 pixels
- If using the maximum number of pixels, determine the mounting method first
- 94" x 46" from center of pixels in corners
- 95.6" x 47.6" overall maximum size (per panel - can be expanded with multiple panels)
- Unlimited numbers of panels can be connected vertically or horizontally and unused pixel sections can be spliced to produce odd sizes or longer/wider panels.
- See photo below for dimensions
- Compatible Pixel Types:
Center to Center
Pixel Spacing
|
Recommended
Viewing Distance
|
Pixel Node
Net Spacing
|
Node Bullet / ~3" Spacing
#711-WP (12v) - 50 Count
#703-WP (12v) - 100 Count
#710-WP (5v)
|
Node Square / ~3" Spacing
#673-WP (12v)
#672-WP (5v)
|
Node Bullet / ~6" Spacing
#712-WP (12v)
|
| | | | | |
2 Inches / 50.8 mm
|
10 to 100 Feet
3 to 30 Meters
|
2.0 Inch Spacing
|
Yes
|
Yes
RECOMMENDED
|
Yes
(use 3" spacing pixels instead)
|
| | | | | |
- County of Origin
- Materials/parts: USA
- Assembly/Mfg: USA
- Design: USA
- Estimated Lifespan
- Materials feature UV inhibitor additives but all plastics will degrade as a result of UV exposure.
- Outdoors (3 month per year), varies by regional UV exposure
- Indoors (minimal UV exposure)
- Installation Accessories
2" PixNode Net Layout
|
