Home > PRE-SEASON Sale >

New!  PRE-SALE: Power Supply - Waterproof / 120v Input / 12v Output / 3.75 amps / 45 Watts with Power Input Cord (Ships March to July)
PRE-SALE: Power Supply - Waterproof / 120v Input / 12v Output / 3.75 amps / 45 Watts with Power Input Cord (Ships March to July)


 
PRE-SALE Price: $11.99

Availability/Ships: March to July 2019
Product Code: 65-PS
Qty:

[Product Description Page] [FAQ & Documentation Page]
 
This is a PRE-SALE item and ships between March and July 2019 - for immediate shipping, purchase the in-stock product instead.

Product Features

  • General Product Information
    • Used for reducing 100 to 130 volts to 12.5 volts DC
    • Output of 3.75 Amps of power at 12 volts DC / 45 watts
    • Short circuit protection
    • Waterproof to IP67 (power supply body only, plugs should still be waterproofed)
  • Items included with this item:
    • Power Supply with bare leads for output and 3 prong grounded plug for input
  • Recommended items for this product
    • Shrink wrap tubing for protecting wiring connections (output).
    • Note we do NOT recommend using electrical tape or wire nuts for wiring connections - this is unsafe.
  • Optional Items
    • Mounting (screws, two sided tape, hot glue or other)
  • Required items for operation:
    • Shrink wrap tubing (for sealing soldered connections). We do not recommend wire nuts or electrical tape be used for connections.
    • Solder for attaching RGB lights or controllers
  • Customer supplied tools or items:
  • Instructions
    • See product page for wiring and product setup videos.
    • For DMX + Power over CAT5 wiring, see our video or documentation
    • For information on how many LEDs you can run from this power supply, see our Knowledge Base
  • Estimated assembly time:
    • First unit: 5-10 minutes
  • Technical Specifications
    • Color: Silver / Mill Spec Aluminum
    • Weight: .80 pounds or 13 Oz
    • Dimensions
      • Height: 1.0"
      • Width (main case, excluding mounting tabs): 9.1" or 9 1/8"
      • Width (main case including tabs): 9.72" or 9 3/4"
      • Height: .8"
      • Depth: 1.15"
    • Temperature Range
      • Operation: 10 to 120 degrees Fahrenheit
      • Storage: -20 to 140 degrees Fahrenheit
    • Material Composition
      • Case: Aluminum and plastic (end caps)
      • Wires: PVC coated - copper
  • County of Origin
    • Materials/parts: China / USA / Japan
    • Assembly: China
    • Design: China
  • Certifications & Approvals
    • Underwriters Laboratories (UL) Certified/Recognized/Approved: No
    • CE: No
    • ROHS (Lead Free): Not Listed
  • Wiring / Interface:
  • Power Input (100-130 volts AC)
    • Neutral - Large blade of plug
    • Hot - Small blade of plug
    • Ground - Round pin
  • Power Output (12.5 volts DC)
    • Red or Brown (varies by model): Positive 12v
    • Black or Blue (varies by model): Negative 12v
    • Stripped and tinned wires ~7" Long

You might also be interested in...
Dumb Square RGB LED Waterproof Module - 12v (SINGLE MODULE) Dumb Rectangle RGB LED Waterproof Module - 12v
Our Price: $0.47

Add
Our Price: $0.79

Add
12v RGB Square Module RGB Rectangle Module 12v DC

Average Rating: 5 of 5 Total Reviews: 20 Write a review »

  0 of 0 people found the following review helpful:
 
NO issues October 16, 2015
Reviewer: Gary Clark from Post Falls, ID United States  
Very easy to connect, labeled clearly, orientation on the mounting plate can be either left or right.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Well built December 27, 2014
Reviewer: Nick Nelson from Wenatchee, WA United States  
Would be nice if the cords were a few inches longer.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great power supply December 27, 2014
Reviewer: Bryan Jones from Irmo, SC United States  
This little guy ran 150 pixels this year with no problems at all. It packs a great punch and survived a 3" rain storm.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Always good stuff! December 16, 2014
Reviewer: Matthew Frazier from Clinton, MS United States  
Def need some hot glue or rubber if you mount to some sort of metal. Cause couple of hrs troubleshooting. Other than that great PS! You guys are my one stop shop for my holiday needs!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great Power Supply November 15, 2014
Reviewer: Robert Wolf from Springville, UT United States  
These power supplies are very easy to ue and work great!

Was this review helpful to you?

View All Customer Reviews