Home > RGB Lights / Bulbs / Strip & Ribbon > Smart / Pixel RGB Lights - Nodes / Bullets >

Smart / Pixel LED RGB 8mm/12mm Square/Lay-Flat Node - 5v / 2811 / 50 Node String / Black / Waterproof EasyPlug3 Input and Output Cables
PRODUCT PHOTO: Smart / Pixel LED RGB 8mm/12mm Square/Lay-Flat Node - 5v / 2811 / 50 Node String / Black / Waterproof EasyPlug3 / xConnect Input and Output Cables


 
Our Price: $19.99



Availability / Ships: Usually Ships in 24 Hours
Product Code: 672-WP

EasyPlug3 Female Pigtail for RGB Pixels

None - I am using HolidayCoro Extensions and/or Controllers
1 of Female EasyPlug3 / Start Pigtail Cable / 18 AWG [Add $1.04]
    - Not required when used with HolidayCoro extensions and controller systems
1 of Female EasyPlug3 / Start Pigtail Cable / 20 AWG [Add $0.79]
    - Not required when used with HolidayCoro extensions and controller systems
EasyPlug3 Male Pigtail for RGB Pixels

None - I am using HolidayCoro Extensions and/or Controllers
1 of Male EasyPlug3 Pigtail Cable / 18 AWG [Add $1.04]
    - Not required when used with HolidayCoro extensions and controller systems
1 of Male EasyPlug3 Output / End Pigtail Cable / 20 AWG [Add $0.79]
    - Not required when used with HolidayCoro extensions and controller systems
To Plug Unused Female Ends & Pigtails

No Plugs for Unused Female Pigtails
1 of Male EasyPlug3/4 Plugs for Female Plugs [Add $0.39]

Qty:  
[Product Description Page] [FAQ & Documentation Page]
 
.
Product Features
  • Features
    • Please note that these require a smart pixel controller - these will not work with dumb controllers!
    • Smart / Pixel Nodes
    • Pixel protocol WS2811 (supported by every major pixel controller)
    • Viewing angle of 120 degrees
    • Waterproof 6" EasyPlug3 plugs on input and output wire
  • Lights
    • Total LEDs per node: 3 (Red, Green, Blue)
    • Total LED nodes per string: 50
    • Total DMX channels required per string: 150 DMX Channels
  • Dimensions
    • Overall Length from node 1 to node 50: 19.2 feet / 230 inches
    • Nominal Node to node (center) distance: ~3 inches
      • Note that this dimension is a common industry method of indicating pixel spacing, additional spacing is added to allow for angles and movement in elements
    • Actual node to node (center) distance: ~4.7 inches (may vary slightly from node to node)
    • Lead in and lead out wire length: 6 inches (both ends) with male and female waterproof plugs
    • Maximum diameter of node neck: ~11.43mm / .45" (this dimension is common for "12mm" nodes)
    • Base dimensions: .75 inch x 1 inch
    • Maximum height (from wires at base to top of node): 1 inch
  • Weather
    • Silicone body/base
    • Epoxy sealed body/casing to ensure waterproof wiring and electronics
    • IP68
  • Wiring colors:
    • Wire: 34 x 0.11mm (commonly referred to as 18 AWG)
    • Pixel direction is marked with arrows on circuit board (input side)
  • Power
    • 5v DC Input
    • White (all three colors) per node: 60 miliamps / .3 Watts
    • White (all three colors) per string (50 nodes): 3 amps / 15 Watts

You might also be interested in...
Advatek PixLite (tm) 16 Controller 18" x 24" RGB 8mm LED/12mm Base Pixel Node Matrix - Mounting Board and Frame PixNode Net™ Flexible - Pixel Node Mounting Net for Matrix Elements Advatek PixLite (tm) 4 Controller

Add
2 or More Pixel Panels - Only: $49.99

Add
Price: $43.95 to $69.95
No lower price anywhere!

Add

Add
PRODUCT PHOTO: Advatek PixLite (tm) 16 Controller PRODUCT PHOTO: 18" x 24" RGB 8mm LED/12mm Base Pixel Node Matrix - Mounting Board and Frame PRODUCT PHOTO: PixNode Net Flexible - Pixel Node Mounting Net for Matrix Elements PRODUCT PHOTO: Advatek PixLite (tm) 4 Controller
PixelPipe Clip - Clear Lexan 1/2" Pipe Mounting Clip V2 / Mounts RGB Strips and Modules to Fascia, Soffit, Roofs and Walls (Single Clip)
5 to 49 Count Price: $0.69

Add
PRODUCT PHOTO: Clear Lexan 1/2" Pipe Mounting Clip V2 / Mounts RGB Strips and Modules to Fascia, Soffit, Roofs and Walls (Single Clip)

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 January 23, 2023
Reviewer: Brett Sansn from Monument, CO United States  
These are some awesome little nodes and work very well.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Lay-flat or die! August 9, 2022
Reviewer: JOHN CREED from Albertville, MN United States  
Best pixels for matrixes and snow flakes sooo easy to push and lower clearance on the back side.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Grest node for Garage Matrix July 23, 2022
Reviewer: JOHN CREED from Albertville, MN United States  
Love the layflat square node pixels, great for PixelNet its the easiest pixel push yet and 5v is great for high density props like garage door matrixes.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Correct Item Shipped Quickly January 3, 2019
Reviewer: John Franklin  
Ordered over Thanksgiving and order was quickly filled and shipped.  Mounted outside during a couple rainy weeks without issue.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Thanks April 19, 2018
Reviewer: Lamar Bolen from Cridersville, OH United States  
Very good shipping and the product is exalt

Was this review helpful to you?

View All Customer Reviews