Knowledge Base:  
Knowledge Base > AlphaPix Pixel Controller

Page of 1
AlphaPix Stuck at Password Login Screen
If your AlphaPix controller is currently stuck at the password login screen and the default password is not working, the issue is likely the following: * The wrong firmware has been installed - if the
AlphaPix Technical Support Page
All support and technical assistance for the AlphaPix controllers can be found on this page. If you are looking for controller specific information, including purchasing the AlphaPix, see this page: h
Configuring the Alphapix Controller with Madrix
The AlphaPix line of controllers work with Madrix. For general AlphaPix setup information including configuration of your PC, wiring and other details, see our AlphaPix setup page . For Madrix supplie
Displaying one sequence on two identical pixel megatrees
For some installations where two 180 degree trees are used with two separate pixel controllers, you may wish to "duplicate" the output so that each tree shows the same sequence for one half of the tre
How to make two Pixel Megatrees play the same sequence
Customers with 360 degree pixel megatrees may wish to use pre-made sequences for 180 degree trees and have the same content displayed on both sides of the tree. This article explains how to mirror out
Networking Options for AlphaPix Wired Network Connections with Home Networks
The AlphaPix controller receives E1.31 data via Ethernet over a CAT5 cable, as a result of this, to get data from the PC to the AlphaPix, we need to send data out the Ethernet port on the show PC to t
Power Injection with RGB Pixel Lights
For some projects, customers may determine that power injection is a suitable solution for their project. This page contains information generally about power injection, examples of how to perform it
Running E1.11 / DMX 1990 Controllers (EasyPix, Dumb Controllers) from AlphaPix RS485 Interface
The AlphaPix pixel controller has the ability to output legacy, DMX 1990 / E1.11 data using RS485 to legacy controllers such as the EasyPix , common dumb RGB and non-RGB controllers and devices such a
Unable to Operate Message on AlphaPix / Network Troubleshooting on AlphaPix
ISSUE: AlphaPix displays "UNABLE TO OPERATE" on LCD interface CAUSE: This message indicates that the AlphaPix will not decode E1.31 or Artnet data because there is no network connection between the c