Knowledge Base:  
Knowledge Base > Controller Related Information (RGB, DC and AC Based) --> Knowledge Base > Controller Related Information (RGB, DC and AC Based)
DIP Switch Addressing Chart
Last Updated: 12/29/2016
Below is the link to our DMX Address DIP Switch Setting Chart:
 
 
You can also use our interactive DMX addressing tool below:
 
 
DMX Start Address (decimal):



NOTE: On HolidayCoro dumb DMX controllers, DIP switch 10 turns on test mode. It may be necessary to turn off DIP switch 10 when driving the controller from a DMX signal.

How helpful was this article in answering your question?

Comments / Feedback / Corrections (please, no questions):
 

Related Articles
 > How to use HolidayCoro RS485 Based DMX controllers with your favorite sequencing application
 > DMX Programmer/Dongle Instructions
 > DC Controllers - Basics (Presentation)
 > Testing DMX output using your HolidayCoro DMX Programmer/Dongle (video)
 > Programming your HolidayCoro DMX Controller using your HolidayCoro Programmer/Dongle (video)
 > What lighting controllers do your products work with?
 > Wiring Up and Programming your HolidayCoro DMX Controller (flow chart and videos)
 > Smart / Intelligent Pixel Controllers Compatible with HolidayCoro Pixel Lights
 > Running Legacy RS485 Light-o-Rama Controllers and RS485 Based DMX (E1.11) and Ethernet Based (E1.31) DMX Controllers Together
 > PixLite Technical Support Page
 > How to link multiple Ethernet based AlphaPix controllers together / Multiple IP Addresses
 > Do HolidayCoro Controllers Work With Light-o-Rama Software
 > EasyLights Controller and Cloud Support Page