Knowledge Base:  
Knowledge Base > --> Knowledge Base >
Programming your HolidayCoro DMX Controller using your HolidayCoro Programmer/Dongle (video)
Last Updated: 05/22/2012
The following video shows how to setup your USB programmer/dongle to program your HolidayCoro 3 channel DMX controller.
 
 


How helpful was this article in answering your question?

Comments / Feedback / Corrections (please, no questions):
 

Related Articles
 > Can I download my sequences/software directly from your website?
 > DC Controllers - Basics (Presentation)
 > How much power do I need for LEDs/RGB Modules/Nodes/Strip/RGB Elements?
 > Testing DMX output using your HolidayCoro DMX Programmer/Dongle (video)
 > DMX Wiring Cross Reference
 > What lighting controllers do your products work with?
 > How to terminate an RS-485 CAT5 DMX line
 > Wiring Up and Programming your HolidayCoro DMX Controller (flow chart and videos)
 > DIP Switch Addressing Chart
 > Running Legacy RS485 Light-o-Rama Controllers and RS485 Based DMX (E1.11) and Ethernet Based (E1.31) DMX Controllers Together
 > Wireless Networking Options for E1.31 and E1.11 Controllers
 > Voltages and Plugs Available from HolidayCoro
 > Why do HolidayCoro Pixels Turn Blue Sometimes?
 > AlphaPix Evolution vs. HinksPix Pro
 > HinksPix Setup and Instructional Page
 > Light-o-Rama LOR CTB16PC Comparison with HolidayCoro AC Controllers
 > Stand Alone / Play on Controller Options for Holiday Displays
 > Are your controllers LOR Compatible?