Knowledge Base:  
Knowledge Base > --> Knowledge Base >
Testing DMX output using your HolidayCoro DMX Programmer/Dongle (video)
Last Updated: 10/11/2012
The following video shows how you can use xLights (a free application) to test your HolidayCoro DMX controllers with the HolidayCoro Programmer/Dongle.  Using this test you will be able to determine that your wiring is correct and that both your controller and programmer are working properly.
 
 


How helpful was this article in answering your question?

Comments / Feedback / Corrections (please, no questions):
 

Related Articles
 > Can I download my sequences/software directly from your website?
 > DC Controllers - Basics (Presentation)
 > How much power do I need for LEDs/RGB Modules/Nodes/Strip/RGB Elements?
 > Programming your HolidayCoro DMX Controller using your HolidayCoro Programmer/Dongle (video)
 > DMX Wiring Cross Reference
 > What lighting controllers do your products work with?
 > How to terminate an RS-485 CAT5 DMX line
 > Wiring Up and Programming your HolidayCoro DMX Controller (flow chart and videos)
 > DIP Switch Addressing Chart
 > Running Legacy RS485 Light-o-Rama Controllers and RS485 Based DMX (E1.11) and Ethernet Based (E1.31) DMX Controllers Together
 > Wireless Networking Options for E1.31 and E1.11 Controllers
 > Voltages and Plugs Available from HolidayCoro
 > Why do HolidayCoro Pixels Turn Blue Sometimes?
 > AlphaPix Evolution vs. HinksPix Pro
 > HinksPix Setup and Instructional Page
 > Light-o-Rama LOR CTB16PC Comparison with HolidayCoro AC Controllers
 > Stand Alone / Play on Controller Options for Holiday Displays
 > Are your controllers LOR Compatible?