Home > DIY Products > RGB Lights / Bulbs / Strip > Smart / Pixel RGB Lights - Strip / Tape / Ribbon / Rolls >

CLEARANCE: Smart / Pixel LED RGB Strip / Ribbon 48 LEDs/m 16 Pixels/m Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 / 58w / White PCB
Smart / Pixel LED RGB Strip 48 LEDs/m 16 Pixels/m


 
Additional Photos:


List Price: $79.95
Single Roll Price: $46.99
Price With Optional Items:: $39.99

Product Code: 704
Qty:

[Product Description Page] [FAQ & Documentation Page]
 
.
Hands On Product Demo
How to solder strip
Product Features
  • Features
    • Please note that these require a smart pixel controller - these will not work with dumb controllers!
    • Smart / Pixel Strip
    • Pixel protocol WS2811 (supported by every major pixel controller)
    • Viewing angle of 120 degrees
    • Includes standard, non-waterproof, 4" leader/pig tail wires with plug to mate with plug on strip
    • White PCB circuit board background
    • High brightness output
  • Lights
    • Total LEDs per Strip: 240 of 5mm x 5mm (5050) RGB LED Lights
    • Total Individually Controllable Sections per Strip: 80 Sections (16 per meter) - each 2.44" (62mm) in length, contain 3 RGB 5050 LED lights per section
    • Total DMX channels required: 240 DMX Channels (80 sections, each with three channels - Red, Green, Blue)
  • Dimensions
    • Overall length is 5 meters or about 16 feet, 6 inches
    • Width of strip without protective boot: .393" / 10mm
    • Width of strip with protective boot: .492" / 12.5mm
    • Height of strip without protective boot: .125"/ 3.18mm
    • Height of strip with protective boot: .160" / 4mm
  • Weather
    • Silicone "boot" covers entire length of strip providing typical weather resistance
    • Ends are silicone glued to ensure weather tightness
    • Not intended for use underwater
  • Wiring colors:
    • Red = Power Input Anode/+/Positive
    • Black or White = Power Input Cathode/-/Negative
    • Blue or Green = Data Signal
    • ~4" Lead In and Lead Out wires. Both lead in and out have plugs.
    • Includes 4" leader that plugs into input side of strip
  • Power
    • 12v DC Input
    • White (all three colors) Entire Roll: 6 amps / ~ 58 Watts
  • Packaging
    • Each strip ships on a plastic reel, packed in a plastic, anti-staic envelope.
    • Wiring instructions are provided on the outside of the envelope.

You might also be interested in...
EasyPix Controller / DMX to SPI Smart Pixel Decoder V3 Power Supply - 12v / 29 amps / 350 Watts PixLite 16 Controller Rain Proof Power Supply - 12v / 33 amps / 400 Watts / 110-120v Input Only (USA/CA/MX)
Our Price: $39.99 / .23 Cents per Controlled Pixel

Add
Our Price: $23.99

Add
Our Price: $154.99

Add
Our Price: $27.99

Add
Push Button DMX to SPI Smart Pixel Decoder / Controller
PixLite 4
Our Price: $99.99

Add

Share your knowledge of this product. Be the first to write a review »