Review: List

Return to DISCONTINUED: HinksPix 16 - E1.31 to SPI Pixel Controller w/OLED Display - 16 SPI Outputs (Pre-Production)

Sort By::

Page of 2

1 of 1 people found the following review helpful:

Amazing Product and UI	April 26, 2017
Reviewer: Dylan Nicholas from NH United States

What the HinksPix offers is untouchable at any similar price point. The UI and the features is simple clear and the best. Thank you for the amazing product.

Was this review helpful to you?

0 of 0 people found the following review helpful:

A+++ Vendor	April 18, 2017
Reviewer: Patrtick Hall from Simi Valley, CA United States

Extremely fast delivery of a quality product. It will be a month or so before I am able to wire and test but I have no doubt that it will all be A-OK ! The documentation on the controller is excellent so I know I will not run into any issues.
Thank You so much for stocking this fine controller.

Was this review helpful to you?

0 of 0 people found the following review helpful:

hinkspix 16 pixel controller	April 3, 2017
Reviewer: Charles Jarvis from Columbus, OH United States

I ordered the new HinksPix controller , it was received on time a it is now operating as expected, after a software bug ( this is a BETA verson). I'm very happy with the chouce. Thanks Charlie J.

Was this review helpful to you?

0 of 0 people found the following review helpful:

HinksPix 16-E1-31 to SPI pixel controller w/ oled	March 21, 2017
Reviewer: Charles Jarvis from Columbus, OH United States

I received the controller within the time noted from the shipper. I had no trouble connecting power or data to the unit. I also knew that this is a beta unit their would be possible issues. I contacted Hoilday Coro and was directed to Joe which was able to solve my problems , which there two. One was mine and the other was a software issue. Again all problems was solved and the controller is working very well. Joe has not yet released all the functioning software, but is in progress. In all of this I am happy with the controller it operates quite well. I have been testing in my basement for couple of weeks not with all the lights connected and no glitches.

Was this review helpful to you?

0 of 1 people found the following review helpful:

Hinkspix 16	February 22, 2017
Reviewer: Vinc from France

Card to the top not disappointed with the investment, the possibilities are huge and the promise up to be good, SAV is it perfect

Was this review helpful to you?

0 of 0 people found the following review helpful:

Has lots of Potential!	February 14, 2017
Reviewer: Jason Guenther from Marble Falls, TX

testing this in the shop, it was very straightforward to configure and it all just worked. I'm looking forward to implementing this into my display. Lots of potential with the features that have not been released yet.

Was this review helpful to you?

0 of 1 people found the following review helpful:

HinksPix 16	January 25, 2017
Reviewer: Samuel Roberson from Fort Pierce, FL United States

I haven't set it up yet. Taking a small break after the 2016 Christmas display. If its as easy as the AlphaPix, it will be a piece of cake. Thanks for continuing to improve and upgrade your products even though they don't need it.

Was this review helpful to you?

0 of 0 people found the following review helpful:

So far so good	January 15, 2017
Reviewer: Todd Lettau from Kimberly, WI United States

Unit works good. Was easy to configure. Can't wait to see what other features will be added.

Was this review helpful to you?

0 of 0 people found the following review helpful:

So far so good	January 3, 2017
Reviewer: Todd from Kimberly, WI.

I am just starting to get into the RGB world. I am a newbie in this field and figured what better way to get into it than to buy some controllers and lights and start messing around with it. I am coming over from the LOR 120v world. So far it has been pretty easy to use. I was able to get it configured without any issues. I was able to get Vixen to control the lights with a test sequence I made. Looks like the future functions of this controller will be awesome once they are activated.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Easy to use. Lots of potential!	December 29, 2016
Reviewer: Mark Reid from Marysville, WA United States

Super easy to get started with this controller.

UI and board layout is very intuitive.

Firmware auto-update makes getting the latest updates easy as pie.

Board still has a lot of features waiting for implementation, but I'm eager to give them all a go as they are released.

This board is going to be a good one!

Was this review helpful to you?