Home > By Location / Season > By Location - Ground >

Singing Pumpkin Face - RGB (46" x 46") + Assembled Controller + RGB Lights (Requires Some Assembly)
HoliadyCoro.com RGB Singing Pumpkin Face Kit
Photos Show Fully Assembled Product

Our Price: $329.99

Availability / Ships: Same Day / Intermittently up to 3 days / Delivery Times
Product Code: 17RGB-KIT1

The following items are included with this product:

DMX Data Generation Source To Be Used

I Already Have an Actidongle or Other RS384 Based, E1.11 / DMX 1990 Data Source
1 of ActiDongle - DMX Dongle (Enttec Pro Compatible) [Add $47.95]  Save $2 when purchased with the sample kit! (limit 1)
Using AlphaPix or EasyLights RS485 Interface  << Click this link for setup information using AlphaPix / EasyLights controllers
NOTE: This dumb controller will not connect directly to the Ethernet (CAT5) jack on a PC or network switch
When using with LOR S3/S4/S5, requires Actidongle (see above) and LOR Advanced edition Software
Pre-Configured Input Voltage & Plug Type

110 to 120 Input Voltage and Input (United States, Canada, Mexico, others) - Type B Plug
220 to 240 Input Voltage and Input (Australia, NZ, China, Others) - Type I Plug
220 to 240 Input Voltage and Input (All Other Countries) - Type B Plug
    Click here for voltage and plug details
Controller Warranty Period

30 Channel Dumb Controller - No Warranty / No Return [No Additional Cost]
30 Channel Dumb Controller - 1 Year Hardware Warranty (Ready2Run Assembled) [Add $8.99]
30 Channel Dumb Controller - 3 Year Hardware Warranty (Ready2Run Assembled) [Add $19.99] 
Click here for detailed information about our warranty policy (opens in new tab)
Click here for information on why we offer warranty options (opens in new tab)
  - Warranty period cannot be adjusted after purchase
  - Ready2Run Packages: Warranty applies only to controller, standard warranty applies to all other items in package
 - Controller hardware is identical for all warranty levels
CAT5 Ethernet and Long Range Data Signal Cable

No Data Cable - I'll Provide My Own
5 Foot / 1.5 Meter Green CAT5 Data Cable for Data Signal [Add $1.99]
7 Foot / 2.1 Meter Green CAT5 Data Cable for Data Signal [Add $2.99]
25 Foot / 7.6 Meter Green CAT5 Data Cable for Data Signal [Add $3.99]  - Save $.50
50 Foot / 15 Meter Green CAT5 Data Cable for Data Signal [Add $5.79]  - Save $.70
100 Foot / 30 Meter Green CAT5 Data Cable for Data Signal [Add $8.99]  - Save $2.00
200 Foot / 60 Meter Green CAT5 Data Cable for Data Signal [Add $17.99]  - Save $2.00
Click Here For Complete CAT5 List and Accessories

[Product Description Page] [FAQ & Documentation Page] [Customer Videos Page]

Get more control, lights and functionality with our RGB Singing Pumpkin Face when compared to our Mini-Light based Singing Pumpkin Face when used with an LOR controller.

This kit comes complete with the RGB lights, controller and wiring along with the Singing Pumpkin itself - all in a waterproof enclosure. Some assembly required for lights.

John Earle's RGB Singing Pumpkin
How to Build the Support Frame
How to Assemble and Wire
How to convert single output sequences to RGB sequences
Product Features
  • General Product Information
    • Intended locations for use:
      • Ground / Yard
      • Wall / Fence / Doors
      • Roof
    • Holiday Seasons:
      • Halloween
    • Other:
      • Talking: Introductions to songs, voice overs (display hours, rules)
      • Singing: Singing to songs with vocals
    • Produced from weather resistant and strong plastic (see below for details)
    • Reverse side/ back is pre-marked with a contrasting, water proof marker that shows the exact path that should be followed for bulb population and the number of RGB nodes required for section
  • Channels and Controllers
    • Light Requirements
      • This product only compatible with RGB nodes - Included in this kit
    • Channels
      • Channel #1 Pumpkin Outline and Stump
        • 76 Nodes (String with pre-attached male plug > 50 nodes > female plug > pre-attached male plug > cut after 26th node)
      • Channel #2 Eyes Open (both):
        • 20 Nodes (Add male pigtail + 24 nodes left over from output 1 > 10 nodes > 2 nodes for gap between eyes > 10 nodes)
      • Channel #3 Eyes Closed (both):
        • 16 Nodes (String with pre-attached male plug > 8 nodes > 2 nodes for gap between eyes > 8 nodes > cut after 18th node)
      • Channel #4 Top Lip:
        • 26 Nodes (Add male pigtail > 26 nodes left over from output 3 > cut off remaining nodes)
      • Channel #5 Middle Mouth:
        • 26 Nodes (String with pre-attached male plug > 26 nodes > cut after 26th node)
      • Channel #6 Bottom Lip:
        • 35 Nodes (String with pre-attached male plug > 35 nodes > cut after 35th node)
      • Channel #7 "O" Mouth:
        • 14 Nodes (Add male pigtail > 14 nodes left over from output 6 > cut off remaining nodes)
      • Channel #8 "Ah" Mouth:
        • 50 Nodes (String with pre-attached male plug > 50 nodes)
      • Total nodes required: 263
    • Compatible controllers:
  • Included, optional and customer supplied items
    • Items included with this item/product/bundle:
      • Three, Black, 4MM (3/16"), ultraviolet resistant, outdoor rated corrugated plastic sheets (see our Knowledge Base for more detailed information about the coro that we use in our products).
    • Required items for operation:
      • RGB 12mm (base) Node Lights - Included in this kit
      • Lighting Controller - Included in this kit
      • DMX Data Source - One ActiDongle per display (can control up to 30 controllers) or if there is an AlphaPix controller, use the RS485 output as shown here
      • Mounting frame – usually inexpensive 2” x 4” material. See our instructions in the Knowledge Base or the assembly video on this page for more information on mounting and frames.
      • Wood or drywall screws (see assembly video)
      • Approximately 1” Fender washer - This spreads out the load and ensures a good grip on the coro to the wood. These can be purchase from the options above. (See assembly video)
      • Misc items – Any mounting or additional materials require to affix the panels to their mounting location.
    • Optional items:
    • Customer supplied tools:
  • Assembly Instructions and Recommended Reading/Watching
  • Estimated assembly times
    • Building frame: 1/2 to 3/4 of an hour
    • Installing nodes, soldering connections, attaching wiring to controller: 1 1/2 to 2 1/2 Hours
  • Technical Specifications
    • Color: Black (front) and White (back) Coro
    • Material thickness: .16" per sheet (3 sheets) / .50" total thickness
    • Overall dimensions: 46” x 46” (includes 1.5” border for 2” x 4” mounting frame) – inside/design dimensions of 43” x 43”. For off-season storage, see our Knowledge Base
    • Shipping dimensions: 23” x 46” (folded down the middle)
    • Weight per Tree: 10.5 pounds (excluding lights or frame) or ~33 pounds with 2x4 frame, nodes, power supply, controller.
    • Temperature Range: -17f to +160f (coro)
    • Material Composition: Polypropylene
    • County of Origin
      • Materials/parts: USA (Texas)
      • Assembly/Mfg: USA (Texas)
      • Design: USA (Texas)
    • Warranty & Support
      • Warranty period
        • One year from date of purchase. See our warranty policy for more information.
    • Customization: Yes - This product can be customized to your specific requirements. For costs, lead times and blackout periods, see our Guide to Customized Products.
  • Product Revision History
    • Initial design: April 2013

You might also be interested in...
Bullet Pixel Node Installation Pixel Pusher Pliers ActiDongle (tm) - Active DMX Dongle (Enttec Pro Compatible) - V2
Our Price: $14.99

Our Price: $59.95
Excluding Optional Support

Bullet Pixel Node Installation Pixel Pusher Pliers Enttec Pro DMX Dongle

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 Wonderful! November 9, 2018
Reviewer: Joshua Bernstein from Los Gatos, CA United States  
These were absolutely wonder and the kids were overjoyed. It would have been really nice if the pixel pliers were included in the kit or at least suggested. They would have been easily worth it!

Some soldering required however!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Cool Halloween addition September 18, 2018
Reviewer: Blake Bowman from Pantego, TX United States  
We can't wait to light this guy up for Halloween!  The setup was incredibly easy and the sequences I bought are awesome.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Great starter for our Halloween Show! October 3, 2017
Reviewer: Rory C from Lehi, UT  
Easy to build using the HolidayCoro build videos.  Our kids and neighbors love it so far!  The controller and power source came already installed in a waterproof enclosure!

Was this review helpful to you?