Home >

DISCONTINUED: Smart / Pixel LED RGB Strip 60 LEDs/m 20 Pixels/m Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 / 72w - White PCB
PRODUCT PHOTO:  Smart / Pixel LED RGB Strip 60 LEDs/m 20 Pixels/m Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 / 72w - White PCB


 
Additional Photos:


List Price: $89.95
Our Price: $32.99
Clearance Price: $19.95
You Save: $70.00


Availability / Ships: DISCONTINUED
Product Code: 708-WHITE
Qty:

[Product Description Page] [FAQ & Documentation Page]
 
THIS PRODUCT HAS BEEN REPLACED WITH THIS PRODUCT WITH WATERPROOF PLUGS:  http://www.holidaycoro.com/p-p/708-wp.htm
NOTE: Strips no longer ship with "flying leads"
How to solder strip
MegaTree
Product Features
  • Features
    • Please note that these require a smart pixel controller - these will not work with dumb controllers!
    • Smart / Pixel Strip
    • Pixel protocol WS2811 (supported by every major pixel controller)
    • Viewing angle of 120 degrees
    • Includes standard, non-waterproof, 4" leader/pig tail wires with plug to mate with plug on strip
    • White PCB circuit board background
    • High brightness output
  • Lights
    • Total LEDs per Strip: 300 of 5mm x 5mm (5050) RGB LED Lights
    • Total Individually Controllable Sections per Strip: 100 Sections (20 per meter) - each 1.97" (50 mm) in length, contains 3 RGB 5050 LED lights per section
    • Total DMX channels required: 300 DMX Channels (100 sections, each with three channels - Red, Green, Blue)
    • Color order: BRG
  • Dimensions
    • Overall length is 5 meters or about 16 feet, 6 inches
    • Width of strip without protective boot: .393" / 10mm
    • Width of strip with protective boot: .492" / 12.5mm
    • Height of strip without protective boot: .125"/ 3.18mm
    • Height of strip with protective boot: .160" / 4mm
  • Weather
    • Silicone "boot" covers entire length of strip providing typical weather resistance
    • Ends are silicone glued to ensure weather tightness
    • Not intended for use underwater
  • Wiring colors:
    • Red = Power Input Anode/+/Positive
    • Black or White = Power Input Cathode/-/Negative
    • Blue or Green = Data Signal
    • ~4" Lead In and Lead Out wires. Both lead in and out have plugs.
    • Includes 4" leader that plugs into input side of strip
  • Power
    • 12v DC Input
    • White (all three colors) Entire Roll: 6 amps / ~ 72 Watts
  • Packaging
    • Each strip ships on a plastic reel, packed in a plastic, anti-staic envelope.
    • Wiring instructions are provided on the outside of the envelope.

You might also be interested in...
EasyPlug4 / 4 Conductor M | F (center) | F / Tap / Splitter / Tee / RGB Dumb Lights Advatek PixLite (tm) 16 Controller
Our Price: $4.29

Add

Add
PRODUCT PHOTO: EasyPlug4 / 4 Conductor M | F (center) | F / Tap / Splitter / Tee / RGB Dumb Lights PRODUCT PHOTO: Advatek PixLite (tm) 16 Controller

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 7 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 Good Strip Light January 14, 2018
Reviewer: Keith Okuniewski from Avoca, PA United States  
Used these for two arches.  Led"s are very bright and diffuse good inside of pex tubing.  Strips are  a little fragile, as I bent one accidentally and the Led section (3 led's) stopped working.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Smart Pixel Strip February 20, 2017
Reviewer: Gilbert Villanueva from HELOTES, TX United States  
The 60/20 Smart pixel led strip is top line. Perfectly weather proof case. Not much more to say. Connectors at both ends and extra pig-tail connector included. Fast delivery.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect for Leaping Arches July 18, 2016
Reviewer: KewlWinter from Palm Bay, FL United States  
I used these to build 4 leaping arches.  I put 64 pixels inside 2" diffuser tubing and grouped them by 8 in the controller configuration.  They look awesome.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Intense color May 29, 2016
Reviewer: Michael Simonson from Redmond, WA United States  
The density of the pixels on these is twice what you get on the 30 LEDs/m strips (duh) which results in very bright, intense colors.  I used two of these in my leaping arches last year and they were amazing.  Will be using these to create a mega-tree.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Look great August 12, 2015
Reviewer: Tony Hight from surprise, AZ United States  
I love how bright these are!

Was this review helpful to you?

View All Customer Reviews