Home > By Location / Season > By Location - Ground >

PixNode CoroCane™ for 12mm Pixel and Dumb Nodes - 99 Node Count
PixNode CoroCaneâ„¢ for 12mm Pixel and Dumb Nodes - 99 Node Count


 
Our Price: $7.99

(Minimum order):  2

Availability/Ships: Same Day, Sporadically up to 3 days (Delivery Time Information)
Product Code: 261-99

To Populate with RGB Pixel Nodes



Qty:  
[Product Description Page]
 
.
Product Features
  • Features
    • Reverse-able - one candy cane can be right or left depending side of the cane the nodes are installed
    • Made from white, strong 10mm (.387") thick coro
    • Uses standard "12mm" bullet type pixel nodes or dumb nodes (square/flat nodes can be used but are not the preferred node format for this item)
  • Size:
    • 14" at the widest point (hook)
    • 35.5" Tall
    • 3.8" Thick
  • Mounting
    • Mount using standard 1/2" EMT Conduit or "T-Stakes" using one of two methods:
      • 24 Zip Tie Holes
      • 12 Velcro Slots
  • Lighting requirement
    • Three rows of 33 nodes each for a total of 99 nodes
  • Assembly time
    • Typically 5-15 minutes per cane (varies by skill, soldering, connections, etc)
  • Additional features
    • Two sets of cord strain relief's at base to relieve strain on cables
    • 2" Base gap to allow for nodes to completely show when obstructed by snow, grass or leaves
  • Product origin
    • Material: USA (Texas)
    • Design: USA (Texas)
    • Manufacturing: USA (Texas)
  • Additional items required to complete
    • Pixels or dumb RGB 12mm nodes
    • Pixel or RGB controller
    • Shrink wrap for light assembly
    • Mounting pole (EMT pipe, re-bar, t-stake or other)



You might also be interested in...
EasyPlug3 / 3 Conductor / 5ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Smart Pixels EasyPix Controller / DMX to SPI Smart Pixel Decoder V3 EasyPlug3 / 3 Conductor / 10ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Smart Pixels Power Supply - Waterproof / 120v Input / 12v Output / 3.75 amps / 45 Watts with Power Input Cord
Our Price: $3.09

Add
Our Price: $39.99 / .23 Cents per Controlled Pixel

Add
Our Price: $5.99

Add
Our Price: $13.95

Add
EasyPlug3 / 3 Conductor / 5ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Smart Pixels Push Button DMX to SPI Smart Pixel Decoder / Controller EasyPlug3 / 3 Conductor / 10ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Smart Pixels Power Supply - Waterproof / 120v Input / 12v Output / 3.75 amps / 45 Watts with Power Input Cord

Share your knowledge of this product. Be the first to write a review »