 |
Product Features
- Design
- Similar design as used in David Peace's 2018 display featured on The Great Christmas Light Fight
- Designed to hold standard "12mm" bullet pixel nodes in a self supporting vertical pattern
- Supports up to 50 total pixels spaced at .9 inches, center to center
- Each stake is marked so that stake can be divded into 10 pixel sections. Each section has clamp slots.
- Up to 5, individual 10 pixel stakes can be made from one stake
- Black, weather resistant 10mm coro
- Self supporting triangular design
- Pre-punched slots for mounting to stake with two 1/2" band clamps (optional)
- 1 Inch holes plus zip tie holes above each 1 inch hole to allow extension cables to pass through and be secured to the coro to prevent pull out of the pixels
- Requirements
- Up to 50 12mm Diameter Bullet nodes (smart pixel or dumb) per stake
- Any number of pixels can be used as holes can be skipped allowing .9, 1.8, 2.7, 3.6 inch spacing
- Recommended pixel can be found here
- NOTE: Non-standard pixels such as "icicle light" nodes may have a diameter larger than 12mm and be harder to install.
- Stake (customer provided)
- Rebar
- T-Stake
- 1/2", 3/4" or 1" EMT tubing
- Securing coro to support stake
- Included
- Dimensions
- Three sides (triangle)
- Overall Height: 47"
- Pixel spacing: .9" inch center to center
- May ship folded (does not affect structural strength)
|
|
|
pixel pole